Optimum Dimensions of Hydraulic Structures and Foundation Using Genetic Algorithm coupled with Artificial Neural Network

Authors

  • Rafa H. AL-Suhaili, Prof. Dr. College of Engineering-University of Baghdad
  • Dheyaa W. Abbood, Prof. Dr. college of Engineering - Al-Mustansiriyah University
  • May Samir Saleh, Dr college of Engineering - Al-Mustansiriyah University

DOI:

https://doi.org/10.31026/j.eng.2017.09.01

Keywords:

inclined cutoff, optimization, genetic algorithm, artificial neural networks, uplift pressure, exit gradient, factor of safety.

Abstract

      A model using the artificial neural networks and genetic algorithm technique is developed for obtaining optimum dimensions of the foundation length and protections of small hydraulic structures. The procedure involves optimizing an objective function comprising a weighted summation of the state variables. The decision variables considered in the optimization are the upstream and downstream cutoffs lengths and their angles of inclination, the foundation length, and the length of the downstream soil protection. These were obtained for a given maximum difference in head, depth of impervious layer and degree of anisotropy. The optimization carried out is subjected to constraints that ensure a safe structure against the uplift pressure force and sufficient protection length at the  downstream side of the structure to overcome an excessive exit gradient. The Geo-studio software was used to analyze 1200 different cases. For each case the
length of protection (L) and volume of structure (V) required to satisfy the safety factors mentioned previously were estimated for the input values, namely, the upstream cutoff depth (S1), the downstream cutoff depth (S2), the foundation width (B), the angle of inclination of the upstream cutoff (Ɵ1)  and the angle of inclination of the downstream cutoff (Ɵ2), H (differencehead), kr (degree of anisotropy) and D (depth of impervious layer). An ANN model was developed and verified using these cases input-output sets as its data base. A MatLAB code was written to perform a genetic algorithm optimization modeling coupled with this ANN model using a formulated optimization model. A sensitivity analysis was done for selecting the crossover probability, the mutation probability and level,
the number of population, the position of the crossover and the weights distribution for all the terms of the objective function. Results indicate
that the most factors that affects. the optimum solution is the $ number of population required. The minimum value that gives stable global optimum solution of this parameter is (30000) while other variables have little effect on the optimum solution. 

Downloads

Download data is not yet available.

How to Cite

“Optimum Dimensions of Hydraulic Structures and Foundation Using Genetic Algorithm coupled with Artificial Neural Network” (2017) Journal of Engineering, 23(9), pp. 1–22. doi:10.31026/j.eng.2017.09.01.

Publication Dates

Published

2017-08-31

Similar Articles

1-10 of 665

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)

1 2 > >>