Statistical Analysis of Metal Removal during Magnetic Abrasive Finishing Process

  • Baqer Ayad Ahmed Department of production engineering & metallurgy -University of Technology, Baghdad, Iraq
  • Saad Kariem Shather Department of production engineering & metallurgy -University of Technology, Baghdad, Iraq
  • Wisam Kadhim Hamdan Department of production engineering & metallurgy -University of Technology, Baghdad, Iraq
Keywords: Single Point Incremental Sheet Forming, Magnetic Abrasive Finishing, Surface roughness, Box-Behnken design, feed rate.

Abstract

This work aims to provide a statistical analysis of metal removal during the Magnetic Abrasive Finishing process (MAF) and find out the mathematical model which describes the relationship between the process parameters and metal removal, also estimate the impact of the parameters on metal removal. In this study, the single point incremental forming was used to form the truncated cone made of low carbon steel (1008-AISI) based on the Z-level tool path. Then the finishing was accomplished using a magnetic abrasive process based on the Box-Behnken design of the experiment using Minitab 17 software was used to finish the surface of the formed truncated cone. The influences of different parameters (feed rate, machining step size, coil current, and spindle speed) on metal removal were (32.948, 21.896, 10.587, and 13.907) %, respectively.

Downloads

Download data is not yet available.
Published
2020-08-01
How to Cite
Ahmed, B., Shather, S. and Hamdan, W. (2020) “Statistical Analysis of Metal Removal during Magnetic Abrasive Finishing Process”, Journal of Engineering, 26(8), pp. 34-45. doi: 10.31026/j.eng.2020.08.03.