Some properties of Reactive Powder Concrete Contain Recycled Glass Powder
Main Article Content
Abstract
Every year, millions of tons of waste glass are created across the globe. It is disposed of in landfills, which is unsustainable since it does not disintegrate into the environment. This study aims to produce reactive powder concrete by using recycled glass powder and determine the influence on the mechanical properties. This study investigated the effect of partial replacement of cement with recycled glass powder at two percentages (0, 20) % by weight of cement on some mechanical properties (Fresh density, Splitting tensile strength, Impact Strength, and voids%) of reactive powder concrete containing 1 % micro steel (MSRPC). Furthermore, using steam curing for (5 hours) at 90 degrees celsius after hardening the sample directly, RPC was produced using local cement, silica fume, and a super plasticizer, with a w/c (0.2). It was found the Fresh density increased by about (7.27%), splitting tensile strength increased by about (23.5%) at age 28day, energy that causes 1-st crack increased by about (77.7%), energy that causes ultimate failure increased by about (54.9%) at age 60 days, and a reduction in the voids % by about (12.5)% at age 28 day compared with the reference mixture.
Article received: 17/4/2022
Article accepted: 24/5/2022
Article published: 1/10/2022
Article Details
How to Cite
Publication Dates
References
Abd Al Kareem, S., and Ahmed, I. F., 2021. Impact Resistance of Bendable Concrete Reinforced with Grids and Containing PVA Solution, Engineering, Technology & Applied Science Research, 11(5), 7709-7713.
Abed, M., Mohammed. N., and Zaid, H., 2018. Effect of silica fume/binder ratio on compressive strength development of reactive powder concrete under two curing systems. MATEC Web of Conferences. 162. 02022. 10.1051/ matecconf/ 201816202022.
ACI PRC-544.3, 2008 Guide for Specifying, Proportioning, and Production of Fiber-Reinforced Concrete.
Aggregate from Natural Sources for Concrete and Construction, Iraqi Specification, No.45/1984.
ASTM C 1240., 2015. Standard Specification for Silica Fume Used in Cementitious, Mixture Annual Book of ASTM Standards.
ASTM C 496/C496M, 2011. Standard Test Method for Splitting Tensile Strength of cylindrical Concrete Specimens.
ASTM C 618, 2015. Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete.
Chyad, A., 2021. Flexural Strength and Impact Behavior of Ferro cement Members Containing Waste Materials, A Thesis Submitted to Civil Engineering Department, University of Anbar.
Collepardi, S., Coppola, L., Troli, R., and Collepardi, M., 1997. Mechanical properties of modified reactive powder concrete, ACI Special Publications, 173, 1-22.
Detwiler, R. J., Fapohunda, C. A., and Natale, J., 1994. Use of supplementary cementing materials to increase the resistance to chloride ion penetration of concretes cured at elevated temperatures, Materials, 91(1), 63-66.
Gawad, M. A., and Fawzi, N. M., 2021. Use of Thermostone Waste Aggregates for Internal Curing of Reactive Powder Concrete, In IOP Conference Series: Earth and Environmental Science (Vol. 877, No. 1, p. 012043), IOP Publishing.
Gawad, M. A., and Al-Jalawi, N. M., 2021. Effect of Internal Curing On Some Properties of Reactive Powder Concrete, A Thesis for the Degree of Master of Science in Civil Engineering. Civil Engineering Department, College of Engineering, University of Baghdad.
Iqbal, S., Ali, A., Holschemacher, K., and Bier, T. A., 2015. Effect of change in micro steel fiber content on properties of High strength Steel fiber reinforced Lightweight Self-Compacting Concrete (HSLSCC), Procedia Engineering, 122, 88-94.
Muhsin, Z. F., and Fawzi, N. M., 2021. Effect of Fly Ash on Some Properties of Reactive Powder Concrete, Journal of Engineering, 27(11), 32-46.
N. M. Al-Jalawi, and AL-Awadi, A. Y. E., 2017. Enhancing Performance of Self–Compacting Concrete with Internal Curing Using Thermostone Chips, Journal of Engineering, 23(7), 1-13.
N. M. Al-Jalawi, 2018. Effect of steel fiber on properties of high performance no fine concrete, International Journal of Engineering and Technology, vol 7, 4.37.
N. M. Al-Jalawi, 2006. Properties of compacted lightweight ferrocement plates, Ph. D. thesis, University of Baghdad. p142.
N. M. Al-Jalawi., 2009. Production of high-performance concrete using different types of local pozzolana, Journal of engineering, vol.15 - No.1.
Portland cement, Iraqi Standard Specification No.5, 2019.
Raju, S., and Kumar, P. R., 2014. Effect of using glass powder in concrete. International Journal of Innovative Research in Science, Engineering and Technology, 31, 21-427.
Richard, P., and Cheyrezy, M. H., 1994. Reactive powder concretes with high ductility and 200-800 MPa compressive strength, Special Publication, 144, 507-518.
Roslan, N. H., Ismail, M., Abdul-Majid, Z., Ghoreishiamiri, S., and Muhammad, B., 2016. Performance of steel slag and steel sludge in concrete, Construction and Building Materials, 104, 16-24.
Safarizki, H. A., and Gunawan, L. I., 2020. Effectiveness of Glass Powder as a Partial Replacement of Sand in Concrete Mixtures, In Journal of Physics: Conference Series (Vol. 1625, No. 1, p. 012025), IOP Publishing.
Salim, L. Gh., Al-Baghdadi, H. M., and Muteb, H. H., Reactive powder concrete with steel, glass and polypropylene fibers as a repair material, Civil Engineering Journal, 5.11: 2441-2449, 2019.
Sarika, S., 2015. A study on properties of reactive powder concrete, Literatures, 3, 5.
Spasojevic, A., Burdet, O., and Muttoni, A., 2008. Applications structurales du béton fibré à hautes performances aux ponts (No. REP_WORK), Rapport OFROU.
Specification, I., 1992. No. 1703: Water used in concrete, Baghdad, Iraq: Central Organization for Standardization and Quality Control.
Standard specification for chemical admixtures for concrete, ASTM C494, 2005.
Standard Test Method for Density (Unit Weight), ASTM C138/ C138M, 2017.
Standard Test Method for density, absorption, and voids hardened concrete ,2013 ASTM C642.
Standard Test Methods for Sampling And Testing Fly Ash Or Natural Pozzolans For Use In Portland-Cement Concrete, ASTM C311,2016.
Talebinejad, I., Bassam, S. A., Iranmanesh, A., and Shekarchizadeh, M., 2004. Optimizing mix proportions of normal weight reactive powder concrete with strengths of 200–350 MPa, In Proceedings of the International Symposium on UHPC, Kassel, Germany (pp. 133-141).
Tong, K., 2020. Application of New Concrete Materials in Civil Engineering, Insight - Material Science - PiscoMed Publishing Pte Ltd, Volume 3, Issue 2.
Yeheyis, M., Hewage, K., Alam, M. S., Eskicioglu, C., and Sadiq, R., 2013. An overview of construction and demolition waste management in Canada: a lifecycle analysis approach to sustainability, Clean Technologies and Environmental Policy, 15(1), 81-91.