Study the Effect of Adding Aluminum Nanoparticles to a Smart Alloy (Cu-Al-Ni) on Hardness and Porosity
Main Article Content
Abstract
This work deals with the effect of adding aluminum nanoparticles on the mechanical properties, micro-hardness and porosity of memory-shape alloys (Cu-Al-Ni). These alloys have wide applications in various industrial fields such as (high damping compounds and self-lubricating applications). The samples are manufactured using the powder metallurgy method, which involved pressing in only one direction and sintered in a furnace surrounded by an inert gas. Four percentages (0%, 5%, 10%, and 15%) of aluminum nanoparticles were fabricated, which depended on the weight of aluminum powder (13%) in the sample under study. To find out which phase is responsible for the reliability of the formation of this type of alloy and its porosity, X-ray diffraction (XRD) and scanning electron microscopy (SEM) tests are used. The Vickers micro-hardness and porosity properties of these alloys were studied using a Vickers micro-hardness and porosity tester according to ASTM b328-1996. The results showed that increasing the concentration of aluminum nanoparticles in the alloy led to an increase in hardness with a decrease in the porosity, and the sample (15%) gave the best hardness (190.8 HV). The sample (0%) gave the highest porosity (19.573) %.
Article Details
Section
How to Cite
References
Ahmed, A., and Bassam, S., 2018. Effect of Cu-Al Proportions in Smart (Cu-Al-Ni) Alloy for Best
Mechanical properties by Using Artificial Intelligent., Association of Arab Universities Journal of
Engineering Sciences, 1 (25).
Ahmed, A., and Hasan, A., 2017. Investigation on Relationship between Shape Memory Effect and
Interconnection Porosity under Multiple Sintering Time of Smart Alloy Cu-Al-Ni., Association of Arab
Universities Journal of Engineering Sciences, 3 (24).
Cullity, B., 1987. Elements of X-ray Diffraction Addison-Wesley series in metallurgy and materials.
United States of America, University of Michigan.
Groover, M., 2013. Fundamentals of Modern Manufacturing Materials, Processes, and Systems.
United States of America, Lehigh University.
Hasan, A., 2016. Prediction of Mechanical Properties of Smart Alloy Cu-Al-Ni based on Sintering Time
by Using ANN., College of Engineering of Baghdad University.
Hautcoeur, A., Fouché, F. and Sicre, J., 2016, May. Cu-Al-Ni shape memory single crystal wires with
high transformation temperature. In 43rd Aerospace Mechanisms Symposium, May, pp. 185-191.
Kolekar, A., Natak, A., Navratne, K. and Mali, A., 2017. Recent advancement in shape memory
alloy. International Research Journal of Engineering and Technology (IRJET), 4(4), pp.2120-2125.
Qasim, M. F., Abbas, Z.K., Abed, S. K., 2022. Production of Load Bearing Concrete Masonry Units
(blocks) From Green Concrete Containing Plastic Waste and Nano Silica Sand Powder., Journal of
Engineering, 28(8), 54-70.
Jasim, N.A.H., Shafiqu, Q.S. and Ibrahim, M.A., 2021. The Effect of Adding High-Density Polyethylene
Polymer on the Engineering Characteristics for Sandy Soil. Journal of Engineering, 27(9), pp.29-37.
Raed, N., and Razooqi, J., 2020. Influences of Mg Addition on the Mechanical Properties of Cu-Al-Ni
Shape Memory Alloys. Tikrit Journal of Engineering Sciences, 27(3), 82- 93.
Hussain, S., Jain, A.K., Ansari, M.A., Pendy, A. and Dasgupta, P., 2017. Study of effect of Fe, Cr and Ti on
the martensite phase formation in Cu-12, 5wt% Al-5wt% Mn SMA. Advanced Materials
Proceesdings, 2(1), pp.22-25.
Shafeeq, M.M., Gupta, G.K., Malik, M.M., Sampath, V. and Modi, O.P., 2016. Influence of quenching
methods on martensitic transformation and mechanical properties of P/M processed Cu–Al–Ni–Ti
shape memory alloys. Powder Metallurgy, 59(4), pp.271-280.
Taher, M., and Ahmed A., 2018. Effect of (Al-Ni) & (Cu-Ni) Concentrations Ratios on the Hardness and
Porosity of Ternary (Cu-Al-Ni) Smart Alloys. Australian Journal of Basic and Applied Sciences, 12(2),
-48.
Taher, M.,and Ahmed A., 2018. Study the Mechanical Properties of Ternary (Cu-Al-Ni) Shape Memory
Alloys Affected by (Al-Ni) and (Cu-Ni) Contents Enhancement with ANN., College of Engineering of
Baghdad University