دراسة عملية لتأثير الاهتزازات القسرية الشاقولية في معامل انتقال الحرارة بالحمل الحر من صفيحة مستوية مسخنة نحو الأعلى
Main Article Content
Abstract
The aim of this work is to perform an experimental study for the effect of forced vertical vibrations on free convection heat transfer coefficient, from flat plate made of Aluminum with dimension (300 Length*100 Width*3 thickness mm).It's heated under a constant heat flux of (250-1500 W/m2 ) upward. The flat plate was located horizontally or inclined in multiple angles at rang of (0o , 30o , 45o 60o ، 90o ). The experimental study is carried out at a range of frequency (2-16 Hz) ، the amplitude at the range of (1.63-7.16 mm), and the Rayleigh number at the rang (138.991< Ra <487.275).
The results of this study show that, the relation between the heat transfer coefficient and the amplitude of vibration is incrementally for inclination angles from (0°-60°), and reaches a maximum ratio of (13%) in the horizontal position, except at the vertical position (θ=90o ) the heat transfer coefficient decreases as the vibration response increases and the maximum decrease ratio occurs at (7.6 %)
Article Details
How to Cite
Publication Dates
References
M.C.Charrier Mojtabi, Y.P.Razi, K.Maliwan and A.Mojtabi, “Heat transfer due to high frequency vibration “, Int. J. Heat and mass transfer, (2003).
Rodrigo G.L. , Jose' A.F. And Douglas M.R. "Natural convection of Vertical flat plates" from Internet,(2003).
S. Fohanno, G. Polidori “Modeling of natural convective heat transfer at an internal surface “from Internet, (2005) .
K.L.Kumar, "Engineering Fluid Mechanics", 5th.Edition, Boston, 1990.
P.K.Nag, “Heat and Mass Transfer”, Second Edition, Tata McGraw-Hill Publishing Company Limited, 2007.