DESIGN AND IMPLEMENTATION OF INFORMATION SYSTEM FOR GENERAL DIAGNOSTIC AND REMEDY OF CASTING DEFECTS

Main Article Content

Qasim M. Daws
Ban Bakir Jawad

Abstract

Casting defects are ones of the important problems occurring in the casting process .The large number of the defects make the diagnosis of them difficult and depend on the inspector experience and his information of the defects property. This diagnostic perhaps being wrong and not accurate. Therefore in this research an inclusive program through information system was designed to diagnose the defects and its causes then put the suggested remedy, this program contains four methods to recognize the defects in castings .The methods are 1.Use selection of the listed property of the defects 2.Benefit from the pictures of defects to diagnose the defect. 3. The questions and answers method .4.Combo box that contains all the defects name .The last method was designed only for the workers having a great experience in this field. It is found after verification that the method of picture is the simplest and rapidly one because the user needs to see the picture that is given to him and compare them with the castings defect. The program was designed by the use of Visual Basic language, which allows making dealing with the methods easy. The arrangement of this number of defects was done by use general classification that classify them to seven groups and these were divided to subdivision groups .The verification was done to check the effectiveness of the program and it gave good results .

Article Details

How to Cite
“DESIGN AND IMPLEMENTATION OF INFORMATION SYSTEM FOR GENERAL DIAGNOSTIC AND REMEDY OF CASTING DEFECTS” (2010) Journal of Engineering, 16(02), pp. 5150–5168. doi:10.31026/j.eng.2010.02.28.
Section
Articles

How to Cite

“DESIGN AND IMPLEMENTATION OF INFORMATION SYSTEM FOR GENERAL DIAGNOSTIC AND REMEDY OF CASTING DEFECTS” (2010) Journal of Engineering, 16(02), pp. 5150–5168. doi:10.31026/j.eng.2010.02.28.

Publication Dates

References

 British Standard terminology. « Internal Defects In Castings » as revealed by radiography B.S 1956 2737. (1956).

 Groover P.Mikell « Fundamentals Of Modern Manufacturing ». Prentice Hall, Vpper Saddle River, New Jersey 07458, A simon and Schuster Company. (1996)

 Jean – christophe Gebelin, Aleksander M. Cendrowicz Mark R. Jolly.

 « Modelling Of The Wax Injection Process For The Investment Casting Process, Prediction Of Defects » IRC in Materials processing, The university of Birmingham edgbaston, Birmingham B15 2TT, UK, International conference on CFD in the Minerals and process Industries (2003).

 Mark Nagel, Ian kay. « Analysis And Reduction Of Casting Defects » Cast Metals Institute (CMI) INC, AFS Headquarters schaumburg, illinois, 1695 N. Penny Lane. (2005)

 Mery domingo, Thomes Jaeger, Dieter filbert « Review Of Methods For Automated Recognition Of Casting Defects » (2002).

 Naro R.L ASI International « Porosity Defects In Iron Casting From Mold-Metal Interface Reactions » Inc. Cleveland, ohio. Silver Anniversary paper, Div.5. (2002

 Sirvio Matti, Sami Vapalahti, Jukka Vainola «Complete Simulation Of High Pressure Die Casting Process In Order To Reduce Castings Defects » VTT Industrial Systems, control Team, P.O, Box 1702, Fin –020441 Fin land (2000).

 Technical Council ,Sub – Committee « ATLAS Of Defects » T. S. g of the Revised and Enlarged edition. ( 1950)