An Experimental Investigation on Fatigue Properties of AA3003-H14 Aluminum alloy Friction Stir Welds
Main Article Content
Abstract
AA3003-H14 aluminum alloy plates were welded by friction stir welding and TIG welding.
Fatigue properties of the welded joints were evaluated based on the superior tensile properties for
FSW at 1500 rpm rotational speed and 80 mm/min welding speed. However, there is not much
information available on effect of welding parameters with evolution of fatigue life of friction stir
welds. The present study experimentally analyzed fatigue properties for base, FSW, and TIG welds
of AA 3003-H14 aluminum alloy. Fatigue properties of FSW joints were slightly lower than the
base metal and higher than TIG welding.
Article Details
Section
How to Cite
References
Bogdan Radu et. al., “Aspects of the Material Flow during Friction Stir Welding of 5754 Al Alloy” , Institute for welding and Material Testing, Romania, IIW DOC., pp.1-10, 2007.
Brian M. Salerno, et. al., "Buckling Collapse Testing of Friction Stir Welded Aluminum", Technical Report, Ship Structure Committee, PP.7-9, 2009.
Carl D. Sorensen and Tracy W. Nelson, "Friction Stir Welding of Ferrous and Nickel Alloys ", Friction Stir Welding and
Processing, ASM International, pp.111-121, 2007.
D .Booth and I .Sinclair, "Fatigue of Friction Stir Welded 2024-T351 Aluminium Alloy", Trans Tech Publications, pp.1-6, 2000.
Eui I. Lim, ” Fatigue Crack Propagation and Stable Tearing in Friction-Stir-Welded Aluminum Sheet”, ASIP, pp.1-29, 2006.
G. Padmanaban and V. Balasubramamian, "An experimental investigation on friction stir welding of AZ31B magnesium alloy, Int. J. Adv. Manuf. Technol.., vol.49, pp.111-121, 2010.
H. J. K. Lemmen et. al., ” Detailed strain field analyses of fatigue cracks in friction stir welded joints”, Aerospace structures and materials, pp.1-23, 2009.
Helena Larsson and Leif Karlsson, "Friction Stir welding of AA 5083 and AA 6082 aluminium", A welding review published by ESAB AB, Sweden, vol.54, No .2, pp.6-10, 2000.
Hua-Bin et. al., ”The investigation of typical welding defects for 5456 aluminum alloy friction stir welds”, Materials Science and Engineering A, pp.61-69, 2006.
Juan Zhao, et. al., "Comparative investigation of tungsten inert gas and friction stir welding characteristics of Al-Mg-Sc alloy plates", Materials and design, vol. 31,, pp. 306- 311,2010
L Fratini, et. al., "Friction stir spot welding of AA6082-T6 :influence of the most relevant process parameters and comparison with classic mechanical fastening techniques", Proc .IMechE Vol .221 Part B :J .Engineering Manufacture, 2007.
M. Awang, et. al., " Thermo-Mechanical Modeling of Friction Stir Spot Welding (FSSW) Process :Use of an Explicit Adaptive Meshing Scheme". SAE International, PP.1-6, 2005.
Mustafa Boz and Adem Kurt, “The influence of stirrer geometry on bonding and mechanical properties in friction stir welding process”, Material and Design, vol.25, pp.343-347, 2004.
N .Jayaraman et. al., "Fatigue life improvement of an aluminum alloy FSW with low plasticity burnishing", Lambda
Technologies, pp.1-10, 2002.
Omar Hatamleh et. al., “Fatigue Crack Growth of Peened Friction Stir-Welded 7075 Aluminum Alloy under Different Load
Ratios” , Journal of materials Engineering and performance, 2009.
P. Cavaliere et. al., ” Effect of welding parameters on mechanical and microstructural properties of dissimilar AA6082–AA2024 joints produced by friction stir welding”, Material and Design, vol.25, pp.1-8, 2008.
Tomotake Hirato, et. al., “Influence of friction stir welding parameters on grain size and formability in 5083 aluminum alloy”, Materials Science and Engineering A, vol.456, pp.344-349, 2007.
Vladvoj Očenášek, et. al., "Microstructure and properties of friction stir welded aluminum alloys", Hradec nad Moravicí, pp.1-8, 2005.