ESTIMATION OF THE LIFE OF THICK CYLINDER SUBJECTED TO INTERNAL PRESSURE WITH MANUFACTURING CRACKS USING J-INTEGRAL METHOD

Article Sidebar

pdf
Published: 2005-03-01
DOI: https://doi.org/10.31026/j.eng.2005.01.08

Main Article Content

Adnan. N. Jamel
Imad. A. Husain
Akeel A. Abtan

Abstract

Cracks may appear in structures due to manufacturing processes and some time are appeared in the structure product from casting, these struetures may be used but in the life less than the design life according to crack propagation on it. In this research a thick cylinder has one crack or more is investigated to estimate the life under pulsation internal pressure. Finite element method with J-integral approach has been used to evaluate the numerical strain energy release rate (J) for the thick cylinder and the stress intensity factor (SIF J-integral method is most accurate method to evaluate the SIF for the elastic-plastic materiel by considering the local plastic zone near crack tip. Software developed using the FEM; J-integral; SIF and Paris formula to estimate the life of the component is presented with many working examples.

Article Details

Issue

Vol. 11 No. 01 (2005): journal of engineering

Section

Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

 
 

How to Cite

“ESTIMATION OF THE LIFE OF THICK CYLINDER SUBJECTED TO INTERNAL PRESSURE WITH MANUFACTURING CRACKS USING J-INTEGRAL METHOD” (2005) Journal of Engineering, 11(01), pp. 79–89. doi:10.31026/j.eng.2005.01.08.

References

AL-Edani, A. A., (1996), Introduction of rotational effects to the calculation of J-integral using Finite and Boundary element methods, Basrah University, Mech. Eng. Dept., 4 Basrah conference for engineering research,

Azodi, and P. Bachmann, (1993), Numerical analysis of eyclic deformation and crack growth of Pre-cracked steel components using the ADINA program system", Computers Structures, vol. 4..

Cherepanov, G. P., (1967), Crack propagation in continuous media, J. Appl. Math. And Mech. Trans., vol 31..

Eshelby, J. D., (1956), The continuum theory of lattice defects, Solid State Phy., vol 3,.

Irwin, G. R., (1957), Analysis of stress and strain near the end of a crack traversing a plate, Trans. ASME, J. Appl. Mech...

James C. Newman. (1998). An Evaluation of the plasticity Induced crack closure concept and measurement methods, NASA/TM.

Knott, J. F., (1975), The Fracture Toughness of metals. J. of Strain analysis, vol 10,.

Marc, A. M.. Krishan, K. C. (1999), Mechanical Behavior of materials, Prentice- Hall, upper saddle river, New Jersey.

Paris, P. C. and F. Erdogor, (1963), A critical analysis of crack propagation laws, Trans. ASME, J. Basic Engng., vol 85..

Rice, J. R., (1968), A path independent integral and the approximate analysis of strain concentration by notches and crack. Trans. ASME, J. Appl. Mech., vol 35..

Rooke. D. P. and Cortwright, D. J. (1976), Compendium of stress intensity factors, Hillingdon Press