Main Article Content

Mahmood H. Al-Ani
Hussain Zaydan Ali
Fanar Mansour


 One of the major advantages of digital photogrammetry is the potential to automate production

processes efficiently , thus substantially improving the price \ performance ratio for photograrnmetric products. The other major advantage of digital photogrammetry is increasing the accuracy of the final output results .Image processing and computer vision techniques have suc,pessfully been employed for facilitating automated procedures in digital aerial images such as interior orientation , relative orientation , point transfer in photogrammetric block triangulation , and the generation of DTM S .Digitat a.erotriangulation including image import and image minification , interior orientation , point transfer , control point measurements , bundle block adjustment , '*'hich is one of the most complex process$s in <tigital photogrammetry and the automation of this process was one of the challenges in the photrrgra.mmetric commturity in the early nineties .The goal of thjs research is building a digital aerotriangulation package that have been implemented on Baghdad University a.s study area using Pentiurn [U personal computer with Jaderia prograln that have been written by the researcher herself , to be the first trial of digital aerotriangulation in Baghdad University .The resurlts of the implemented work vras RMSx: 8.1 l4m , RMSy = 8.372m & RMSz :22.785m , and this is iue to a lot of errors that have been faced during the various phases of this work.. 

Article Details

How to Cite
“DIGITAL AEROTRIAINGULATION” (2004) Journal of Engineering, 10(3), pp. 333–343. doi:10.31026/j.eng.2004.03.04.

How to Cite

“DIGITAL AEROTRIAINGULATION” (2004) Journal of Engineering, 10(3), pp. 333–343. doi:10.31026/j.eng.2004.03.04.

Publication Dates


Al-Owaid, Abdulah M. Vol. 56, February (1995), Value Engineering: Concept And Application, Journal Of Jordanian Engineer,, 34-6.

Barrie, Donald S.. Et Al. Vol. 103, No. Co3, September (1977). The Professional CM Team Discovers Value Engineering, Journal of The Construction Division, ASCE,, 423-435.

Bash, Ismail M., Et Al. Vol 117, No. 3, September (1991), Value Engineering In Egyptian Bridge Construction, Journal of Construction Engineering And Management, 393-401.

Bekr, G.A.R.. (1990), Clients Control of Construction. PhD. Thesis submitted to University Of Nottingham Nottingham

Dell'Isola, Alphonse J. (1982), Value Engineering in The Construction Industry. New York Van Nostrand Reinhold.

Goldhaber, S., Et AL(1977). Construction Management Principles and Practices. New York: Wiley-Interscience.

Macedo, Manuel C.. Et Al (1978), Value Management for Construction New York: Wiley-Interscience

O'Brian, James J. (1976), Value Analysis in Design and Construction, New York: McGraw-Hill

Palmer. Angela, Et Al. Vol. 122, No. 4, December, (1996), Holistic Appraisal of Value Engineering in Construction in United States, Journal of Construction Engineering and Management

Zimmerman, Larry W, and Glen D. Hart. (1982). Value Engineering, A Practical Approach for Owners, Designers and Contractors New York Van Nostrand Reinhold

Similar Articles

You may also start an advanced similarity search for this article.