Influence of Design Efficiency of Water Supply Network Inside Building on its Optimum Usage: Review
Main Article Content
Abstract
The water supply network inside the building is of high importance due to direct contact with the user that must be optimally designed to meet the water needs of users. This work aims to review previous research and scientific theories that deal with the design of water networks inside buildings, from calculating the amount of consumption and the optimal distribution of the network, as well as ways to rationalize the use of water by the consumer. The process of pumping domestic water starts from water treatment plants to be fed to the public distribution networks, then reaching a distribution network inside the building till it is provided to the user. The design of the water supply network inside the building is mainly affected by the amount of water consumed in the building. On this basis, the pipes' dimensions and the water tank's volume are determined. The operating pressure of the water supply network inside the building is calculated to overcome the height difference and the friction inside the pipes and provide sufficient pressure to operate the most remote fixture. The most important results of the research are that the optimal use of the water distribution network inside the buildings is achieved by the correct design and implementation using skilled labor, materials, and devices of high quality and rationalization of water consumption by the user.
Article Details
Section
How to Cite
References
AASHTO, R30., 2019. Standard Practice for Mixture Conditioning of Hot Mix Asphalt. American Association of State and Highway Transportation Officials, 02, pp. 1–5. https://www.in.gov/indot/div/mt/aashto/testmethods/aashto_r30.pdf.
Al-Sabaeei, A. M., Napiah, M. B., Sutanto, M. H., Alaloul, W. S., Zoorob, S. E., and Usman, A., 2022. Influence of Nanosilica Particles on the High-Temperature Performance of Waste Denim Fibre-Modified Bitumen. International Journal of Pavement Engineering, 23(2), pp. 207–20. doi:10.1080/10298436.2020.1737060.
Al-Sabaeei, A. M., Napiah, M. B., Sutanto, M. H., Alaloul, W. S., Nur I. Y., Muhammad I. K., and Saeed, S., 2021. Physicochemical, Rheological and Microstructural Properties of Nano-Silica Modified Bio-Asphalt. Construction and Building Materials, 297, 123772. doi:10.1016/j.conbuildmat.2021.123772.
Alhamali D. I., Wu, J., Liu, Q., Hassan, N. A., Yusoff, N. I. M., and Ali, S. I. A., 2016. Physical and Rheological Characteristics of Polymer Modified Bitumen with Nanosilica Particles. Arabian Journal for Science and Engineering, 41(4), pp. 1521–30. doi:10.1007/s13369-015-1964-7.
Ali, S. H., and Ismael, M. Q., 2021. Improving the Moisture Damage Resistance of HMA by Using Ceramic Fiber and Hydrated Lime. Al-Qadisiyah Journal for Engineering Sciences, 13(4), pp. 274–83. doi:10.30772/qjes.v13i4.681.
An, Z., Zhang, J., Pan, S., and Song, G., 2012. Novel peanut-like α-Fe2O3 superstructures: Oriented aggregation and Ostwald in a one-pot solvothermal process. Powder Technology, 217, pp. 274–280. doi:10.1016/j.powtec.2011.10.038
ASTM, 2018. Road and Paving Materials Vehicle Pavement Systems. Annual Book of ASTM Standards, Vol. 04 and Vol.05, American Society for Testing and Materials.
Bala, N., Napiah, M., and Kamaruddin, I., 2018. Effect of Nanosilica Particles on Polypropylene Polymer Modified Asphalt Mixture Performance. Case Studies in Construction Materials, 8(March), pp. 447–54. doi:10.1016/j.cscm.2018.03.011.
Bala, N., Napiah, M., and Kamaruddin, I., 2020. Nanosilica Composite Asphalt Mixtures Performance-Based Design and Optimisation Using Response Surface Methodology. International Journal of Pavement Engineering, 21(1), pp. 29–40. doi:10.1080/10298436.2018.1435881.
Behiry, A. E. A. E. M., 2012. Laboratory Evaluation of Resistance to Moisture Damage in Asphalt Mixtures. Ain Shams Engineering Journal, 4(3), pp. 351–63. doi:10.1016/j.asej.2012.10.009.
Cheng, J., Shen J., and Xiao, F., 2011. Moisture Susceptibility of Warm-Mix Asphalt Mixtures Containing Nanosized Hydrated Lime. Journal of materials in civil engineering, 23(11), pp. 1552–59. doi:10.1061/(ASCE)MT.1943-5533.
Crucho, J. M. L., das Neves, J. M. C., Capitão, S. D., and de Picado-Santos, L. G., 2018. Mechanical Performance of Asphalt Concrete Modified with Nanoparticles: Nanosilica, Zero-Valent Iron and Nanoclay. Construction & Building Materials, 181, pp. 309–18.
doi:10.1016/j.conbuildmat.2018.06.052.
Enieb, M., and Diab, A., 2017. Characteristics of Asphalt Binder and Mixture Containing Nanosilica. International Journal of Pavement Research and Technology, 10(2), pp. 148–57. doi: 10.1016/j.ijprt.2016.11.009.
Ganesh, K., and Prajwal, D. T., 2020. Studies on Fatigue Performance of Modified Dense Bituminous Macadam Mix Using Nano Silica as an Additive. International Journal of Pavement Research and Technology, 13(1), pp. 75–82. doi:10.1007/s42947-019-0087-z.
Ismael, M. Q., Fattah, M. Y., and Jasim, A. F., 2022. Permanent Deformation Characterization of Stone Matrix Asphalt Reinforced by Different Types of Fibers. Journal of Engineering, 28(2), pp. 99–116. doi:10.31026/j.eng.2022.02.07.
Khattak, M. J., A. Khattab, Zhang, P., Rizvi, H. R., and Pesacreta, T., 2013. Microstructure and Fracture Morphology of Carbon Nanofiber Modified Asphalt and Hot Mix Asphalt Mixtures. Materials and Structures/Materiaux et Constructions 46 (12): 2045–57. doi: 10.1617/s11527-013-0035-3.
Li, R., Xiao, F., Amirkhanian, S., You, Z., and Huang, J., 2017. Developments of Nano Materials and Technologies on Asphalt Materials – A Review. Construction & Building Materials, 143, pp. 633–48. doi:10.1016/j.conbuildmat.2017.03.158.
Ismael, S. M., and Ismael, M. Q., 2019. Moisture Susceptibility of Asphalt Concrete Pavement Modified by Nanoclay Additive. Civil Engineering Journál, 5(12), pp. 2535-2553. doi:10.28991/cej-2019-03091431.
Mirabdolazimi, S. M., Kargari, A. H., and Pakenari, M. M., 2021. New Achievement in Moisture Sensitivity of Nano-Silica Modified Asphalt Mixture with a Combined Effect of Bitumen Type and Traffic Condition. International Journal of Pavement Research and Technology, 14(1), pp. 105–15. doi: 10.1007/s42947-020-0043-y.
Quipment, T., 2005. Evaluation of Hot Mix Asphalt Moisture Sensitivity Using the Nottingham Asphalt. Final Report, July.
Saleem, A. A., and Ismael, M. Q., 2020. Assessment Resistance Potential to Moisture Damage and Rutting for HMA Mixtures Reinforced by Steel Fibers. Civil Engineering Journal. 6 (12), pp. 1726-1738. doi: 10.28991/cej-2020-03091578.
SCRB/R9. 2003. General Specification for Roads and Bridges. Section R/9, Hot-Mix Asphalt Concrete Pavement, Revised Edition. State Corporation of Roads and Bridges, Ministry of Housing and Construction, Baghdad, Republic of Iraq.
Shafabakhsh, G. H., and Ani, O. J., 2015. Experimental Investigation of Effect of Nano TiO2/SiO2 Modified Bitumen on the Rutting and Fatigue Performance of Asphalt Mixtures Containing Steel Slag Aggregates. Construction & Building Materials, 98, pp. 692–702. doi: 10.1016/j.conbuildmat.2015.08.083.
Taherkhani, H., and Tajdini, M., 2019. Comparing the Effects of Nano-Silica and Hydrated Lime on the Properties of Asphalt Concrete. Construction and Building Materials, 218, pp. 308–315. doi: 10.1016/j.conbuildmat.2019.05.116.
Wang, H., You, Z., Mills-beale, J., and Hao, P., 2012. Laboratory Evaluation on High Temperature Viscosity and Low Temperature Stiffness of Asphalt Binder with High Percent Scrap Tire Rubber. Construction & Building Materials, 26 (1), pp. 583–90. doi: 10.1016/j.conbuildmat.2011.06.061.
Yao, H., You, Z., Li, L., Lee, C. H., Wingard, D., Yap, Y.K, Shi, X., and Goh, S. W., 2013. Rheological Properties and Chemical Bonding of Asphalt Modified with Nanosilica. Journal of Materials in Civil Engineering, 25 (11), pp. 1619–30. doi: 10.1061/(asce)mt.1943-5533.0000690.