Experimental Evaluation of PV Panel Efficiency Using Evaporative Cooling Integrated with Water Spraying
Main Article Content
Abstract
In this work, an inventive photovoltaic evaporative cooling (PV/EC) hybrid system was constructed and experimentally investigated. The PV/EC hybrid system has the prosperous advantage of producing electrical energy and cooling the PV panel besides providing cooled-humid air. Two cooling techniques were utilized: backside evaporative cooling (case #1) and combined backside evaporative cooling with a front-side water spray technique (case #2). The water spraying on the front side of the PV panel is intermittent to minimize water and power consumption depending on the PV panel temperature. In addition, two pad thicknesses of 5 cm and 10 cm were investigated at three different water flow rates of 1, 2, and 3 lpm. In Case #1, the evaporative cooling decreased the temperature of the PV panel by about 15 ℃ related to the uncooled PV panel for both pad thicknesses. While case #2 showed a more significant temperature drop for PV panel by about 27 ℃ and 29.7 ℃ for pad thicknesses of 5 cm and 10 cm, respectively. Compared to the uncooled PV panel, the cooled panel had a distinct enhancement in performance. The efficiency of the PV panel in case #1 was augmented by 5.7% with 50 mm pad thickness and 8.4% for 100 mm pad thickness. Case #2 revealed more improvement in the efficiency by 9% for 5 cm and up to 20% for 10 cm pad thickness. The PV panel electric power was augmented by 7.3% and 13.8% for 2 and 3 lpm water flow rates, respectively. Compared to the flow rate of 1 lpm. The open voltage circuit improved by 4.1% and 9.4% for cases #1 and #2, respectively. The higher air temperature drop was about 11.4 ℃ for case #2 at 10 cm pad thickness.
Article Details
Section
How to Cite
References
Agyekum, E. B., Kumar, S. P., Alwan, N. T., Velkin, V. I., and Shcheklein, S. E., 2021. Effect of dual surface cooling of solar photovoltaic panel on the efficiency of the module: experimental investigation. Heliyon, 7(9), p. 07920. doi:10.1016/j.heliyon.2021.e07920
Ahmed, A. M. and Danook, S. H., 2018. Efficiency improvement for solar cells panels by cooling. 2nd International Conference for Engineering, Technology and Sciences of Al-Kitab, ICETS 2018. IEEE, (May), pp. 39–42. doi:10.1109/ICETS.2018.8724625
Alktranee, M. and Bencs, P., 2022. Effect of Evaporative Cooling on Photovoltaic Module Performance. Process Integration and Optimization for Sustainability, 6, pp. 921-930. doi.org/10.1007/s41660-022-00268-w
Almuwailhi, A. and Zeitoun, O., 2021. Investigating the cooling of solar photovoltaic modules under the conditions of Riyadh. Journal of King Saud University - Engineering Sciences, 35(2), pp. 123-136. doi:10.1016/j.jksues.2021.03.007
Bailek, N., Bouchouicha, K., Aoun, N., EL-Shimy, M., Jamil, B., and Mostafaeipour, A., 2018. Optimized fixed tilt for incident solar energy maximization on flat surfaces located in the Algerian Big South. Sustainable Energy Technologies and Assessments, 28, pp. 96–102. doi:10.1016/j.seta.2018.06.002
Bevilacqua, P., Bruno, R. and Arcuri, N., 2020. Comparing the performances of different cooling strategies to increase photovoltaic electric performance in different meteorological conditions. Energy, 195, p. 116950. doi:10.1016/j.energy.2020.116950
Bahaidarah, H., Subhan, A., Gandhidasan, P., and Rehman, S., 2013. Performance evaluation of a PV (photovoltaic) module by back surface water cooling for hot climatic conditions. Energy, 59, pp. 445-453. doi:10.1016/j.energy.2013.07.050
Castanheira, A. F. A., Fernandes, J. F. P. and Branco, P. J. C., 2018. Demonstration project of a cooling system for existing PV power plants in Portugal. Applied Energy, 211, pp. 1297–1307. doi:10.1016/j.apenergy.2017.11.086
Elghamry, R. and Hassan, H., 2020. Impact a combination of geothermal and solar energy systems on building ventilation, heating and output power: Experimental study. Renewable Energy, 152, pp. 1403–1413. doi:10.1016/j.renene.2020.01.107
Fernandes, F. T., Farret, F. A., Longo, A., Nardin, C. R., and Trapp, J. G., 2014. PV efficiency improvement by underground heat exchanging and heat storage. in 3rd Renewable Power Generation Conference (RPG 2014), pp. 1–6.
Haidar, Z. A., Orfi, J., Oztop, H. F., and Kaneesamkandi, Z., 2016. Cooling of solar PV panels using evaporative cooling. Journal of Thermal Engineering, 2(5), pp. 928–933. doi:10.18186/jte.72554
Haidar, Z. A., Orfi, J. and Kaneesamkandi, Z., 2018. Experimental investigation of evaporative cooling for enhancing photovoltaic panels efficiency. Results in Physics. , 11, pp. 690–697. doi:10.1016/j.rinp.2018.10.016
Haidar, Z. A., Orfi, J. and Kaneesamkandi, Z., 2021. Photovoltaic panels temperature regulation using evaporative cooling principle: Detailed theoretical and real operating conditions experimental approaches. Energies, 14(1), 145. doi:10.3390/en14010145
Harahap, H. A., Dewi, T. and Rusdianasari, 2019. Automatic Cooling System for Efficiency and Output Enhancement of a PV System Application in Palembang, Indonesia. Journal of Physics: Conference Series, 1167(1), 012027. doi:10.1088/1742-6596/1167/1/012027
Bahaidarah, H. M., Rehman, S., Gandhidasan, P., and Tanweer, B., 2013. Experimental evaluation of the performance of a photovoltaic panel with water cooling. 2013 IEEE 39th Photovoltaic Specialists Conference (PVSC), pp. 2987-2991, IEEE. doi:10.1109/PVSC.2013.6745090
Kadhim, A. M., and Aljubury, I. M. A., 2021. Experimental performance of cooling photovoltaic panels using geothermal energy in an arid climate. Heat Transfer, 50(3), pp. 2725–2742. doi.org/10.1002/htj.22002
Mahdi, A. H. and Aljubury, I. M., 2021. Experimental investigation of two-stage evaporative cooler powered by photovoltaic panels using underground water. Journal of Build. Engineering, 44, p. 102679. doi:10.1016/j.jobe.2021.102679
Nizetic, S., Coko, D., Yadav, A., and Grubisic-Cabo, F., 2016. Water spray cooling technique applied on a photovoltaic panel: The performance response. Energy Conversion and Management, 108, pp. 287–296. doi: 10.1016/j.enconman.2015.10.079.
Qiu, T., Wang, L., Lu, Y., Zhang, M., Qin, W., Wang, S., and Wang, L., 2022. Potential assessment of photovoltaic power generation in China. Renewable and Sustainable Energy Reviews, 154, 111900. doi:10.1016/j.rser.2021.111900
Risdiyanto, A., Kristi, A. A., Susanto, B., Rachman, N. A., Junaedi, A., and Mukti, E. W., 2020. Implementation of Photovoltaic Water Spray Cooling System and Its Feasibility Analysis. Proceedings - 2020 International Conference on Sustainable Energy Engineering and Application: Sustainable Energy and Transportation: Towards All-Renewable Future, ICSEEA 2020, pp. 88–93. doi:10.1109/ICSEEA50711.2020.9306133
Sainthiya, H., Beniwal, N. S. and Garg, N., 2018. Efficiency improvement of a photovoltaic module using front surface cooling method in summer and winter conditions. Journal of Solar Energy Engineering, Transactions of the ASME, 140(6), pp. 1–7. doi:10.1115/1.4040238
Schiro, F., Benato, A., Stoppato, A., and Destro, N., 2017. Improving photovoltaics efficiency by water cooling: Modelling and experimental approach. Energy, 137, pp. 798–810. doi:10.1016/j.energy.2017.04.164
Suresh, M. and Shanmadhi, R., 2020. Studies on the performance of 150W solar photovoltaic module with evaporative cooling. IOP Conference Series: Materials Science and Engineering, 912, (4), 042016. doi:10.1088/1757-899X/912/4/042016
Beckwith, T.G., Marangoni, R.D., and Lienhard, J.H., 2011. Mechanical measurements, Pearson Learning Solutions, 6th ed.
Zanlorenzi, G., Szejka, A. L. and Canciglieri, O., 2018. Hybrid photovoltaic module for efficiency improvement through an automatic water cooling system: A prototype case study. Journal of Cleaner Production, 196, pp. 535–546. doi:10.1016/j.jclepro.2018.06.065
Zhao, Y., Gong, S., Zhang, C., Ge, M., and Xie, L., 2022. Performance analysis of a solar photovoltaic power generation system with spray cooling. Case Studies in Thermal Engineering, 29, p. 101723. doi:10.1016/j.csite.2021.101723