EFFCT OF HOOPS AND COLUMN AXIAL LOAD ON SHEAR STRENGTH OF HIGH-STRENGTH FIBER REINFORCED BEAM-COLUMN JOINTS
Main Article Content
Abstract
A reinforced concrete frame is referred as "RIGID FRAMES". However, researches indicate that the Beam-Column joint (BCJ) is definitely not rigid. In addition, extensive research shows that failure may occur at the joint instead of in the beam or the column. Joint failure is known to be a catastrophic type which is difficult to repair.
This study was carried out to investigate the effect of hoops and column axial load on the shear strength of high-strength fiber reinforced Beam-Column Joints by using a numerical model based on finite element method using computer program ANSYS (Version 11.0). The variables are: diameter of hoops and magnitude of column axial load.
The theoretical results obtained from ANSYS program are in a good agreement with previous experimental results.
Article Details
Section
How to Cite
References
- Kani, Z.M.,"Capacity of High Strength Fiber Reinforced Beam-Column Joints", M.Sc thesis, University of Technology, Baghdad, Iraq, 1997
- Gefken, P.R and Ramey, M.R., "Increased Joint Hoop Spacing in Type 2 Seismic Joints Using Fiber Reinforced Concrete", ACI Structural Journal, Vol. 86, No.2, MarchApril ,1989, pp. 168-172.
- Jindal, R.L. and Hassan, K.A., "Behaviour of Steel Fibers Reinforced Concrete BeamColumn Connections", Fibre Reinforced Concrete, ACI Publication, SP-81, 1984, pp. 107-123.
- Craig, R. J.,Mahadev, S., Patel, C. C., Viteri, M. and Kertesz, C., "Behaviour of Joints Using Reinforced Fibrous Concrete", Fibre Reinforced Concrete, ACI Publication, SP-81, 1984, pp. 125-167
- Henager, C. H., "Steel Fibrous, Ductile Concrete Joint for Seismic-Resistant Structures ", Reinforced Concrete Structures in Seismic Zones, ACI publication, SP-53, 1997, pp. 371-386.
- ANSYS, "ANSYS Help", Release 11.0, Copyright 2007.
- Taylor, H. P. J.,"The Behaviour of Insitu Concrete Beam-Column Joints", London,Cement and Concrete Association, May, 1974, Technical Report No. 42.492, 32 pp.
- Sarsam, K. F.," Strength and Deformation of Structural Concrete Joints", Ph.D. Thesis, University of Manchester Institute of Science and Technology, 1983, 340 pp.
- Hadi Tuamma Al-Jubbori, " The Effect of Hoops on The Shear Strength of Concrete Beam-Column Joints", M.Sc Thesis,University of Technology, Baghdad, Iraq, 1986.
- Abdullah, A.M.," Shear Strength Of HighStrength Concrete Beams", M.Sc Thesis, University of Technology, Baghdad 1987, 120 pp.
- ASTM Designation C 33-86., "Concrete Aggregates", 1989 Annual Book of ASTM , Standard American Society for Testing & Materials , Philadelphia, Pennsylvania, Section4, Vol. 04-02, pp 10-15.
- European Committee for Standardization (CEN), Eurocode 3, "Design of Steel Structures", Part 1.1: General Rules and Rules for Buildings, DD ENV 1993-1-1, EC3.
- ACI Committee 318, "Building Code Requirements for Structural Concrete (ACI 318M-2008) and Commentary (ACI 318RM-2008)", American Concrete Institute, Farmington Hills, USA, 2008.
- Bangash, M.Y.H., "Concrete and Concrete Structures: Numerical Modelling and Applications", Elsevier Science Publishers Ltd., London, England, 1989.
- Desayi, P. and Krishnan, S., "Equation for the Stress-Strain Curve of Concrete", Journal of the American Concrete Institute, Vol. 61, March 1964, pp. 345-350.
- Kachlakev, D., Miller, T. and Yim, S., "Finite Element Modelling of Reinforced Concrete Structures Strengthened with FRP Laminates", Final Report, SPR 316, May 2001, 99 p.
- ACI-ASCE committee 352 Report;"Recommendations for Design of BeamColumn Joints in Monolithic Reinforced Concrete Structures"; ACI Journal, V.82, No.3, May-June, 1985, pp. 266-283.
- Ehsani, M.R.,and Wight, J.K., "Exterior Reinforced Concrete Beam –to- Column Connections Subjected to Earthquakestype Loading", ACI Journal, V.82, No.4, July-August, 1985, pp. 449-492.
- Uzumeri, S. M., "Strength and Ductility of Cast in Place Beam-Column Joints", Reinforced Concrete Structures in Seismic Zones, ACI Publications, SP-53, 1977, PP. 293-350.
- Park, R., and Paulay, T., "Reinforced Concrete Structures"; John Wiley and Sons, 1975, 769 PP.
- Lee, D. L. N., Wight, J. K., and Hanson, R.D.; "RC Beam-Column Joints under Large Load Reversals", Journal of the Structural Division, V.103, No.ST-12, December, 1977, PP. 2337-2350.
- Paulay, T., Park, R., and Pristley, M. J. M., "Reinforced Concrete Beam-Column Joints under Seismic Actions", ACI journal, Nov., 1978, PP. 585-593.
- Marques, J. G. L., and Jirsa, J. O., "A Study of Hooked Bar Anchorage in BeamColumn Joints", ACI journal, V.72, No.5, May, 1975, PP. 198-209.