Removal of Nickel and Cadmium Ions from Wastewater by Sorptive Flotation: Single and Binary systems
Main Article Content
Abstract
The removal of heavy metal ions from wastewater by sorptive flotation using Amberlite IR120 as a resin, and flotation column, was investigated. A combined two-stage process is proposed as an alternative of the heavy metals removal from aqueous solutions. The first stage is the sorption of heavy metals onto Amberlite IR120 followed by dispersed-air flotation. The sorption of metal ions on the resin, depending on contact time, pH, resin dosage, and initial metal concentration was studied in batch method .Various parameters such as pH, air flow rate, and surfactant concentration were investigated in the flotation stage. Sodium lauryl sulfate (SLS) and Hexadecyltrimethyl ammonium bromide (HTAB) were used as anionic and cationic surfactant respectively. The sorption process, which is PH dependent, shows maximum removal of metal ions at pH 7. Langmuir and Freundlich isotherm expressions were found to give both a good fit to the experimental data. Kinetic data correlated well with Lagergren second order kinetic model, and flotation step enhanced the removal efficiency of nickel and cadmium from wastewater from about 75% to 94% and reduce turbidity so it can dispense with the filtering process, which is expensive technology. It is believed that flotation separation has great potential as a clean water and wastewater treatment technology.
Article Details
Section
How to Cite
References
Al-Obaidi, F.I., 2011, Removal of copper ion from waste water by flotation, M.Sc., thesis , Baghdad University, Collage of Engineering.
Arsalani, N., Rakh, R., Ghasemi, E., and Entezami, A. A., 2009, Removal of Ni(II) From Synthetic Solutions Using New Amine-containing Resins Based on Polyacrylonitrile, Iranian Polymer Journal, Vol. 18, No. 8, pp. 623-632.
Aslam, M.M., Hassan, I., Malik, M., and Matin, A., 2004, Removal of copper from industrial effluent by adsorption with economical viable material, EJEAFChe, Vol. 3, No. 2, pp. 658-664.
Aslam, M.Z., Ramzan, N., Naveed, S., and Feroze, N., 2010, Ni (II) Removal by biosorption using ficus religiosa (peepal) leaves, J. Chil. Chem. Soc., Vol.55, No. 1, pp. 81-84.
Edzwald JK , Dissolved air flotation and me, Elsevier, 2010.
El-Sayed, G. O, Dessouki, H. A, and Ibrahim, S. S, 2010, Biosorption of Ni (II) And Cd (II) Ions from Aqueous Solutions onto Rice Straw, Chemical Sciences Journal, Vol. 20: CSJ-9.
Asano, T., Burton, F.L., Leverenz, H.L., Tsuchihashi, R., and Tchobanoglous, G., 2007, Water reuse: issues, technologies, and applications, Metcalf &Eddy/AECOM. McGraw-Hill, USA.
Ghazy, S. E., El-moray, S. M., and Ragab, A. H., 2008, Ion flotation of copper (II) and lead (II) from environmental water samples, J.Appl.Sci.Environ. Manage.Vol. 12, pp. 75 – 82.
Gupta, S. S., and Bhattacharyya, K.G., 2009, Treatment of water contaminated with Pb (II) and Cd (II) by adsorption on koalinite, montmorillonite and their acid-activated forms, Indian Journal of Chemical Technology, Vol. 16, pp. 457-470.
Hiatt, V. and J.E. Huff, 1975. Environmental impact of cadmium, Overview. Int. J. Environ. Stud.,Vol. 7: pp.277-285.
Ho, Y.S., McKay, G., 1999, Pseudo-second order model for sorption processes, Process Biochem, Vol. 34, pp.451–65.
Lagergren, S., 1989, About the theory of so-called adsorption of soluble substances, Kung Seventeen Hand, 24, pp.1–39.
Medina, P., Torem, M., and Mesquita, L., 2005, On the kinetics of precipitate flotation of Cr III using sodium dodecylsulfate and ethanol, Minerals Engineering, Vol. 18, pp. 225–231.
Mohammed A., A, Ebrahim E., S and Alwared I., A, 2013, Flotation and Sorptive-Flotation Methods for Removal of Lead Ions from Wastewater Using SDS as Surfactant and Barley Husk as Biosorbent, Journal of Chemistry, Article ID 413948,.
Nocito, F.F... Lancilli, C., Giacomini, B., and Sacchi, G. A., 2007, Sulfur Metabolism and Cadmium Stress in Higher Plants, Plant Stress, Global Science Books, Vol. 1, No. 2, pp. 142-156.
Onundi, Y.B., Mamun, A.A., Al Khatib, M.F., Ahmed, Y.M., 2010, Adsorption of copper, nickel and lead ions from synthetic semiconductor industrial wastewater by palm shell activated carbon, Int. J. Environ. Sci. Tech., Vol.7, No. 4, pp. 751-758.
Rafati, L., Mahvi, A. H., Asgari, A.R., and Hosseini, S. S., 2010, Removal of chromium (VI) from aqueous solutions using Lewatit FO36 Nano ion exchange resin, Int. J. Environ. Sci. Tech., Vol. 7, No. 1, pp. 147-156.
Rao. S., R., 2006, Resource recovery and recycling from metallurgical wastes, Elsevier Science, Netherlands.
Scorzelli, I.B., Fragomeni, A.l., and Torem, M.L., 1999, Removal of cadmium from a liquid effluent by ion flotation, Minerals Eng., Vol. 12, pp.905–917.
Sevgi K, 2007, Comparison of Amberlite IR120 and dolomite performances for removal of heavy metals, Journal of Hazardous Materials, Vol. 147, pp. 488-496.
Sulaymon, A., and Mohammed, A., 2010, Separation and hydrodynamic performance of air –kerosene-water system by bubble column, International journal of chemical reactor engineering,Vol. 8, pp. 1-15.
Turtureanu, A., Carmen, M.C., Georgescu, C., 2011, Cadmium removal from aqueous sloutions by flotation with anionic collector — research paper — Faculty of Agricultural Sciences, Food Industries and Environmental Protection, Sibiu, ―Lucian Blaga‖ University of Sibiu, Romania, Vol. XV, No.1
Wheaton, and Lefevre; 2000 (http:// www .dow .com /Published Literature /dh_0032/0901b803800326ca.pdf).
World Health Organization, Guidelines for drinking Water Quality, Geneva, 1984.
Zouboulis, A.I., and Matis, K.A., 1987, Ion flotation in environmental technology, Chemosphere,Vol. 16, pp, 623-