Effect of Kerosene and Gasoline on Some Properties of High Performance Concrete

Main Article Content

Nada Mahde Al-Jalawi
Dalia Shakir Atwan

Abstract

During the last quarter century, many changes have taken place in the tanks industry and also in the materials that used in its production، while concrete is the most suitable material where concrete tanks has the benefits of strength, long service life and cost effectiveness. So, it is necessary improvement the
conventional concrete in order to adapt the severe environment requirements and as a result high
performance concrete (HPC) was used. It is not fundamentally different from the concrete used in the past, although it usually contains fly ash, ground granulated blast furnace slag and silica fume, as well as
superplasticizer. So, the content of cementitious material is high and the water/cement ratio is low. In this
study, the silica fume and superplasticizer were used for obtaining HPC. This paper is an attempt to provide some information about effect kerosene and gasoline on some properties of HPC which can be used as storage tanks for petroleum products. The experimental work in this research including; slump test, weight loss test and compressive strength test were performed. The results of these investigations indicated that the petroleum products have unacceptable effects on the properties of concrete.

Article Details

How to Cite
“Effect of Kerosene and Gasoline on Some Properties of High Performance Concrete” (2011) Journal of Engineering, 17(06), pp. 1643–1657. doi:10.31026/j.eng.2011.06.29.
Section
Articles

How to Cite

“Effect of Kerosene and Gasoline on Some Properties of High Performance Concrete” (2011) Journal of Engineering, 17(06), pp. 1643–1657. doi:10.31026/j.eng.2011.06.29.

Publication Dates

References

Aïtcin, P., (1998), High Performance Concrete, E and FN SPON, London, pp.592.

Al-Geryawee, A. and Al-Rahame, A., Properties of Concrete Exposed to Oil Products, Higher Diploma, Thesis, University of Technology, 1999.

Al-Lami, M., Structural Behaviour of Ferrocement Exposed to Petroleum Products, PHD, Thesis, University of Technology, 1997.

Al-Zaidi M., Influence of Oil Products on The Physical and Electrical Properties of Concrete, M.Sc, Thesis, University of Technology, 2001.

American Concrete Institute. ACI Committee 211.1-95, Standard Practice for Selection Proportions for Normal, Heavy Weight and Mass Concrete, ACI Manual of Concrete Practice, Part 1-1995.

ASTM C33-03, Standard Test method for Grading of crushed rock coarse aggregate, Annual Book of ASTM Standard, Vol.04.02.

ASTM C143-89, Standard Test Method for Slump of Hydraulic Cement Concrete, Annual Book of ASTM Standard, Vol.04-02, 1989, pp. 85-86.

American Society for Testing and Materials, Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, ASTM International, West Conshohocken, PA, USA.

ASTM C 192, 2007. American Society for Testing and Materials, Standard Test Methods for Chemical Resistance of

Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes, ASTM International, West Conshohocken, PA, USA, ASTM C 267, 1997.

Bassuoni, M. and Nehdi, M., Resistance of Self- Consolidating Concrete to Sulfuric Acid Attack with Consecutive pH Reduction, Cement and Concrete Research, 2007, pp. 1070–1084.

Bernard, F., Kamali, S. and Prince, W. ,3D Multi-Scale Modelling of Mechanical Behaviour of Sound and Leached Mortar, Cement and Concrete Research, 2008, pp. 449–458.

B.S.1881, Part 116, 1989, Method for Determination of Compressive Strength of Concrete Cubes, British Standard Institution, pp.3.

Close, S. and Gangliu, Z., Concrete for Environmental Structures, Concrete International, April 2004.

De Larrad, F., Acker, P., and Le Roy, R. "Chapter 3- Shrinkage Creep and thermal Properties" in High Performance Concrete and Applications, ed.

Shah, S.P., and Ahmad, S.H., Edward Arnold, Great Britain, 1994, pp. 65-114.

Gambhir, M., Concrete technology, Third Edition, Civil Engineering Series, 2004.

Hanh, P. and Tuan, N., High Performance Concrete Used for Marine Gravity Concrete Works, The 3rd ACF International Conference ACF/VCA 2008.

Hooton, R., Influence of Silica Fume Replacement on Physical Properties and Resistance to Sulfate Attack, Freezing and Thawing, and Alkali-Silica Reactivity, ACI Materials Journal, Vol. 90, No. 2, March-April 1993, pp. 143-151.

Moufaq, J., Effects of Petroleum Products on Civil Engineering Structures, Editor, National Center for Construction Labs, July 1998.

Nyugen, V., Colina, H., Torrenti,J., Baulay, C.and Nedjer, B., Chemo-Mechanical Coupling of Leached Concrete Part 1: Experimental Results, Nuclear Engineering and Design, 2007, pp. 2083– 2089.

VSL International LTD, Concrete Storage Structures, Berne/ Switzerland,use of the VSL special construction methods, may 1983.

Similar Articles

You may also start an advanced similarity search for this article.