Parameters Affecting the Strength and Behavior of RC Dapped-End Beams: A Numerical Study
محتوى المقالة الرئيسي
الملخص
The finite element method has been used in this paper to investigate the behavior of precast reinforced concrete dapped-ends beams (DEBs) numerically. A parametric investigation was performed on an experimental specimen tested by a previous researcher to show the effect of numerous parameters on the strength and behavior of RC dapped-end beams. Reinforcement details and steel arrangement, the influence of concrete compressive strength, the effect of inclined load, and the effect of support settlement on the strength of dapped-ends beams are examples of such parameters. The results revealed that the dapped-end reinforcement arrangement greatly affects the behavior of dapped end beam. The failure load decreases by 25% when insufficient development length for main dapped-end reinforcement is provided, and nib shear reinforcement has less effect than nib main reinforcement. The results also showed that the shear strength of dapped-end beams increased as concrete strength increased. When the compressive strength of concrete increased by 100% led to an enhancement of strength capacity by about 34%. The strength of the dapped-ends beams is significantly affected by the settlement of the supports.
تفاصيل المقالة
القسم
كيفية الاقتباس
المراجع
ACI Committee 318, 2019. Building Code Requirements for Reinforced Concrete (ACI 318M-19), American Concrete Institute, Detroit, Michigan, USA.
AlSabawy A. M., 2013. Nonlinear three-dimensional finite element analysis of reinforced concrete dapped-end beams, Iraqi journal of civil engineering, 9(1), pp.1-16.
Al - Sherrawi, M. H. and Shanshal, Z. M., 2016. Torsional Resistance of Reinforced Concrete Girders with Web Openings, Journal of Engineering, 22(2), pp. 137–155.
ANSYS Release Version 15. 2020. A Finite Element Computer Software Theory and User Manual for Nonlinear Structural Analysis. Inc. Canonsburg, PA.
Aswin, M., Mohammed, B.S., Liew, M.S. and Syed, Z.I., 2015. Root cause of reinforced concrete dapped-end beams failure, International Journal of Applied Engineering Research, 10(22), pp.42927-42933.
Chen, W.F., 1982. Plasticity in reinforced concrete, J. Ross Publishing.
Desayi, P. and Krishnan, S., 1964, March. Equation for the stress-strain curve of concrete, In Journal Proceedings, 61(3), pp. 345-350.
Fib-Bulletin 42, 2008. Constitutive modelling of high strength/ high performance concrete, Fib- International Federation for Structural Concrete Lausanne, Switzerland.
Gere, J. M., and Timoshenko, S. P., 1997. Mechanics of Materials. PWS Publishing Company, Boston, Massachusetts.
Lu, W.Y., Chen, T.C., and Lin, I.J., 2015. Shear strength of reinforced concrete dapped-end beams with shear span-to-depth ratios larger than unity, Journal of Marine Science and Technology, 23(4), pp. 431-442.
Lu, W.Y., Lin, I.J., Hwang, S.J., and Lin, Y.H., 2003. Shear strength of high‐strength concrete dapped‐end beams, Journal of the Chinese Institute of Engineers, 26(5), pp.671-680.
Mahmood, B.A., and Mohammad, K.I., 2019. Finite element analysis for RC deep beams under an eccentric load, Tikrit Journal of Engineering Sciences, 26(1), pp.41-50.
Mohammed, S. D., and Mahmoud, T. K., 2015. Strength Enhancement of Prestressed Concrete Dapped-End Girders, Journal of Engineering, 21(10), pp. 1–16.
Meyer, J., 1998. Ein Beitrag zur Untersuchung der Verformungsfähigkeit von Bauteilen aus Beton unter Biegedruckbeanspruchung, University of Leipzig (Doctoral dissertation, PhD thesis.
Nagrodzka-Godycka, Krystyna, and Paweł Piotrkowski, 2012. Experimental Study of Dapped-End Beams Subjected to Inclined Load, ACI Structural Journal, 109(1), pp. 11-20.
Pei-Chang Huang and Antonio Nanni, 2015. Dapped-End Strengthening of Precast Prestressed Concrete Double Tee Beams with FRP Composites, Center for Infrastructure Engineering Studies.
Peng T., 2009. Influence of Detailing on Response of Dapped End Beams. A Thesis of Master Degree, Mcgill University, Montréal, Canada. pp. 1-103.
Popovics, S., 1973. A numerical approach to the complete stress-strain curve of concrete, Cement and concrete research, 3(5), pp.583-599.
Precast/Prestressed Concrete Institute, 2010. PCI Design Handbook – Precast and Prestressed Concrete, Seventh Edition, Precast/Prestressed Concrete Institute, Chicago, Illinois, USA.
Sabre, Ahmed Bashar M., Bayar J. Al-Sulayfani, and Khalaf I. Mohammad, 2021. Numerical Study on Nonlinear Behavior of RC Continuous Deep Beams, Journal of Physics, 1973(1), pp. 1-17.
Shakir, Q.M., Al-Tameemi, H.A., and Kamonna, H.H., 2020. Effect of Opening Characteristics on the Performance of High Strength Rc Dapped-End Beams, Journal of Engineering Science and Technology, 15(3), pp.693-708.
Shakir, Qasim M., 2018. Reinforced concrete dapped end beams–state of the art, International Journal of Applied Science 1(2), pp. 44-57.
Shakir, Qasim M., 2020. A Review on Structural Behavior, Analysis and Design of RC Dapped End Beams, IOP Conference Series: Materials Science and Engineering, 978(1), pp. 1-16.
Taher, S.D., 2005. Strengthening of critically designed girders with dapped ends. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 158(2), pp.141-152.
Wang Q., Guo Z., and Hoogenboom, P. C.J., 2005. Experimental investigation on the shear capacity of RC dapped end beams and design recommendations, Structural Engineering and Mechanics, 21(2), pp. 221-235.
Willam, Kaspar J., and Warnke EP., 1975. Constitutive Model for the Triaxial Behavior of concrete, International Association for Bridge and Structural Engineering. 19, pp. 1-30.