Evaluation of the Stability and Flow of Asphalt Concrete Produced with Waste Brick Tile Powder as a Filler
محتوى المقالة الرئيسي
الملخص
The utilization of recycled brick tile powder as a replacement for conventional filler in the asphalt concrete mix has been studied in this research. This research evaluates the effectiveness of recycled brick tile powder and determines its optimum replacement level. Using recycled brick tile powder is significant from an environmental standpoint as it is a waste product from construction activities. Sixteen asphalt concrete samples were produced, and eight were soaked for a day. Samples contained 5% Bitumen, 2% to 5% brick tile powder, and conventional stone dust filler. The properties of samples were evaluated using the Marshall test. It was observed that the resistance to stiffness and deformation of asphalt concrete was increased by 99% when the conventional filler was replaced with brick tile powder. The resistance to deformation decreases as the percentage of brick tile powder increases while Marshall stability values increase significantly. At an optimum content of 4% recycled brick tile powder as filler, the Marshall stability is increased by 123%. Based on this investigation, it is established that brick tile powder can be effectively used in asphaltic concrete as a filler. This presents a sustainable solution to waste utilization and pavement performance.
تفاصيل المقالة
كيفية الاقتباس
تواريخ المنشور
المراجع
Ahmed, H.Y., Othman, A.M., and Mahmoud, A.A., 2006. Effect of using waste cement dust as a mineral filler on the mechanical properties of hot mix asphalt. Assiut. Univ. Bull. Environ. Res., 9 (1), pp. 51-60. Doi:10.21608/AUBER.2006.150251
Alves, B.S.Q., Dungan, R.S.C., Raquel, L.P.G., Rosa de Carvalho, P., and Catia, R.S., 2014. Metals in waste foundry sands and an evaluation of their leaching and transport to groundwater Water. Air, and Soil Pollution, 225(5), pp. 1-11. Doi:10.1007/s11270-014-1963-4.
Arulrajah, A., Ali, M.M.Y., Piratheepan, J., and Bo, M.W., 2012. Geotechnical properties of waste excavation rock in pavement subbase applications. Journal of Materials In Civil Engineering, 24(7), pp. 924-932. Doi:10.1061/(ASCE)MT.1943-5533.0000419.
Asphalt Institute, 1997. Mix design methods for asphalt. Manual Series No. 2 (MS-02). The Asphalt Institute. Lexington, KY.
ASTM C128, 2022. Standard test method for density, relative density (specific gravity), and absorption of fine aggregate. ASTM International, West Conshohocken, PA, USA. Doi:10.1520/C0128-22.
ASTM C188, 2017. Standard test method for density of hydraulic cement. ASTM International, West Conshohocken, PA. Doi:10.1520/C0188-17.
ASTM D36/D36M, 2012. Standard test method for softening point of Bitumen, (ring-and-ball apparatus). ASTM International, West Conshohocken, PA. Doi:10.1520/D0036_D0036M-12,
ASTM D5, 2006. Standard test method for penetration of Bituminous materials. ASTM International, West Conshohocken, PA. Doi:10.1520/D0005-06.
ASTM D6927, 2015. Standard test method for Marshall stability and flow of asphalt mixtures. ASTM International, West Conshohocken, PA. Doi:10.1520/D6927-15.
ASTM D92, 2018. Standard test method for flash and fire points by Cleveland open cup tester. ASTM International, West Conshohocken, PA. Doi:10.1520/D0092-18.
Basha F., Oluma G., and Biruk Y., 2020. Application of sawdust ash as filler material in asphaltic concrete production. Civil and Environmental Engineering, 16(2), pp. 351-359. Doi:10.2478/Cee-2020-0035.
BS 812-2, 1995. Methods for determination of density, Water Absorption. British Standard Institution, London, United Kingdom.
BS EN 196-6, 2018. Methods of testing cement: Determination of fineness. British Standards Institution, 389 Chiswick High Road, London. www.bsigroup.com
BS EN 933-1, 2012. Tests for geometrical properties of aggregates. Determination of particle size distribution. Sieving Method. British Standard Institution, London, UK.
Chen, M., Lin, J., Wu, S., and Liu, C., 2011. Utilization of recycled brick powder as alternative filler in asphalt mixture. Journal of Construction and Building Materials, 25, pp. 1532-1536. Doi:10.1016/j.conbuildmat.2010.08.005
Federal Ministry of Works and Housing, 2016. General Specification for Roads and Bridge. Lagos, Nigeria.
Ghasemi, M., and Marandi, S. M., 2013. Performance improvement of crumb rubber-modified Bitumen using recycled glass powder. Journal of Zhejiang University-Science A (Applied Physics & Engineering), 14(11), pp. 805-814. Doi:10.1631/jzus.A1300053
Hwang, S.D, Park, H.M, Rhee, S.K., 2008. A study on engineering characteristics of asphalt concrete using filler with recycled waste lime. Waste Management, 28(1), pp. 191–199. Doi:10.1016/j.wasman.2006.11.011
Khaled, Z.R., and Ahmed, M.A., 2009. Utilization of white cement bypass dust as filler in asphalt concrete mixtures. Canadian Journal of Civil Engineering, 36, pp. 191–195. Doi:10.1139/L08-124
Mahyar, A., and Alireza, A., 2012 The effect of recycled concrete aggregate and steel slag on the dynamic properties of asphalt mixtures. Construction and Building Materials, 35, pp. 1–7. Doi:10.1016/j.conbuildmat.2012.02.036
Molenaar, A.A.A., and Van Niekerk, A.A., 2002. Effects of gradation, composition, and degree of compaction on the mechanical characteristics of recycled unbound materials. Transportation Research Record, 1787, pp. 73-82. Doi:10.3141/1787-08
NGSRB, 1997. Nigerian general specifications for road and bridges. Volume 2, Federal Ministry of Works and Housing, Nigeria.
Osarenmwinda, J. O., and Abel, C.P., 2014. Performance evaluation of refractory bricks produced from locally sourced clay materials. Journal of Applied Science Environmental Management, 18(2) pp. 151-157. Doi:10.4314/jasem.v18 i2.1
Poon, C.S., and Chan, D., 2005. Feasible use of recycled concrete aggregates and crushed clay brick as unbound road sub-base. Construction and building materials, 20, pp. 578-585. Doi:10.1016/j.conbuildmat.2005.01.045
Serkan, T., 2008. Mechanical evaluation of asphalt–aggregate mixtures prepared with fly ash as a filler replacement. Canadian Journal of Civil Engineering, 35(1), pp. 27–40.
Doi:10.1139/L07-082
Souliman, M.I., and A. Eifert, 2016. Mechanistic and economical characteristics of asphalt rubber mixtures. Advances in Civil Engineering, P. 8647801. Doi:10.1155/2016/8647801
Sutradhar, D., Mintu, M., Golam, J.C., and Mohd, A.S., 2015. Effect of using waste material as filler in Bituminous mix design. American Journal of Civil Engineering, 3(3), pp. 88-94. Doi:10.11648/j.ajce.20150303.16
Taha, R., Al-Rawas, A., and Al-Harthy, A.S., 2002. Use of cement bypass dust as filler in asphalt concrete mixtures. Journal of Materials in Civil Engineering, 14(4), pp. 338-343. Doi:10.1061/(ASCE)0899-1561(2002)14:4(338)
Taherkhani, H., and Bayat, H., 2016. Investigating the properties of asphalt concrete containing recycled brick powder as filler. International Journal of Science and Engineering Investigations, 5(49), pp. 6-12. Doi:10.1016/j.cscm.2022.e01004
Mix Design Methods for Asphalt Concrete and Other Hot-Mix Types (MS-2). The Asphalt Institute, 6th Ed.
Xuan, D.X., Hoube, L.J.M., Molenaar, A.A.A., and Shui, Z., 2012. Investigation of combined effect of mixture variables on mechanical properties of cement treated demolition waste. Engineering Journal, 16 (4), pp. 107-116. Doi:10.4186/ej.2012.16.4.107.