EFFECT OF THE OUTLET NOZZLE DIAMETER ON THE PERFORMANCE OF DIVERGENT VORTEX TUBE
محتوى المقالة الرئيسي
الملخص
The aim of the present work is to study the effect of different outlet nozzle diameters, by using one or two nozzles on the performance of divergent vortex tube and also to determine the effects of various parameters on the vortex tube cooling performance such as: refrigeration capacity, coefficient of performance, isentropic efficiency. The experimental investigation was carried out on a divergent vortex tube rig manufactured for the present study covering all tests. The effect of different outlet nozzle diameters ( dn= 4 mm, dn = 5 mm, and dn= 6.5 mm) on the performance of the vortex tube is described by using one nozzle or two nozzles by varying the pressure of the inlet air and cold air mass ratio (μc) within the ranges (Pi abs=2 - 7 bar) and (μc= 0 - 1). The outlet nozzle diameter, (dn= 5 mm), and the outlet cold diameter (dc= 10 mm), when using two nozzles, give high temperature separation and may considered to be the optimum for different pressures of the inlet air regarding all the size tube diameter. The experimental study predicts two empirical
results between the outlet nozzle diameter (dn), number of nozzles (N), inside vortex tube diameter (D), and length of vortex tube (L)
تفاصيل المقالة
كيفية الاقتباس
تواريخ المنشور
المراجع
AL-Abriy, Z. T.“ Effect of tangential nozzles number on the Performance of the vortex tube”. Master’s Thesis, University of Technology, Mech. Eng. Dep. Baghdad, Iraq, December 1995.
AL-Jielawe, A. F .“Effect of divergent angle on the Performance of Vortex tube”.Master’s Thesis, University of Technology, Mech. Eng. Dep. Baghdad, Iraq, September 1994.
AL- Barwari, R. R. I., “ Experimental Study on The Thermodynamic Properties of Vortex Tubes With a Divergent Chamber”. Ph. D. thesis, University of Technology, Mech. Eng. Dep., Baghdad Iraq, February 2004.
Hilsch, R .“ The use of the expansion of gases in a centrifugal field as a cooling process”. The Review of Scientific Instruments, vol.18, No. 2, pp. 108-113, Feb. 1947.
Mitushen, A.I and Mohammed, A. K. Part I: “ Design and construction of Laser Doppler Velocimeter”, Part II: “Visualization of the spiral flow inside the vortex tube by using laser”. Soviet researches, The library Of gas and Oil Institute, Vol. 10, and 11 Moscow, 1992.
Martynovskii, V. S., and Alekseev, V. P. “Investigation of the vortex thermal separation effect for gases and vapors.” Technical physics, vol.26, No. 2, pp. 2233-2243, 1957.
Prasad, M. “Refrigeration and Air-conditioning.” 5th. Ed., July, pp. 174-179, 1996.
Raiskii, Y. D., and Tunkel, L. E. “ Influence of vortex tube configuration and length on the process of energetic gas separation.” Journal of engineering physics, vol.27, No. 6, pp. 1578-1581 ,December 1974.
Soni, Y. and Thompson, W. J .“Optimal design of the Ranque-Hilsch Vortex tube”. Transaction of the ASME, Journal of Heat Transfer, pp. 316-317, May 1975.
Spendley, W., Hext, W., and Himswarth, F. R. .“Sequential application of simplex design in optimization and Evolutionary operation”. Technometrics, vol.4, pp. 441-461, 1962.
Takahama, H. and Yokosawa, H .“Energy separation in vortex tubes with a divergent Chamber”. Transactions of the ASME, Journal of Heat Transfer, vol.103, pp. 196-203, May 1981
Vortex tube theory. http://www. free serve.co.uk/rhvtmati/explan.htm, 2000.
Vortec Corporation Catalogue. Company Catalogue, 10125 Carver Road, Cincinnati, Ohio, USA, 1992. UK Distributor: MEECH VORTEC, Burford House, 15 Thorney, Leys Business Park, Witney, Oxford, OX87GE