SLES SURFACTANT AS DRAG REDUCING AGENT WITHIN GASOIL FLOWING THROUGH PIPELINES
محتوى المقالة الرئيسي
الملخص
Sodium Lauryl Ether Sulfate (SLES) with five different concentrations (from 50 to 100 ppm) were used as drag reducer. This surfactant was studied using gasoil with seven different fluid flow rates (from 1.9 to 4.5 m3 /h) and a testing section length of 4 m. Percentage drag reduction (%Dr) was found to increase by increasing the surfactant concentration and Reynolds number. Maximum drag
reduction (45.5%) was acheved by using 300 ppm of SLES dissolved in gas oil for flow rate equals to 4.5 m3 /h. Friction factor was calculated from the experimental data. For pure solvent; friction factor values lies near or at Blasuis asymptote. While, by producing the surfactants into the flow, the friction factor values were positioned below Blasius asymptote towards Virk maximum drag reduction asymptote. Correlation equation was suggested for surfactant solutions. This correlation shows the friction factor as a function of Reynolds number (Re) and surfactant concentration (C). The results showed good agreement between the observed friction factor values and the predicted ones from the correlation equation.
تفاصيل المقالة
القسم
كيفية الاقتباس
المراجع
* Rashidi M. and Baner Jee S., “The effect of boundary conditions and shear rate on streack formation and break down in turbulent flow” Phys. Fluid A2, pp 1827-1831 (1990).
* Jackob M. and Jan D. T., “Drag reduction by polymer additives in turbulent pipe flow: Laboratory and numerical experiments”, Ph. D. thesis (2002).
* Zakin J. L., Myska J. and Chara Z., “New limiting drag reduction and velocity profile asymptote for polymeric and non-polymeric additives systems”, AICHE J., 42, pp 3544-3546 (1996).
* Martier J. F., Lu C. C. and Nagesh K., “Commercial drag reduction TAPS, present and future”, ASME fluids Eng. Summer Meeting, 237, pp 229-234 (1996).
* Myska J. and Zakin J. L, “Differences in the flow behaviors of polymeric and cationic surfactant drag reducing additives”, Ind. Eng. Chem. Res., 36, pp 5483-5487 (1997).
* Lumely J. L., “Turbulent drag reduction by polymer additive: a survey on the influence of polymer additives on velocity and temperature fields”, IUTAM Symp., pp 215-222 (1985).
* Charachafchy A.A., “Increasing the pumpability in pipes by using chemical additives”, Development article (1-44), Petroleum Training Institute, Baghdad, May (1989).
* Zakin J. L., Rodriguez J. M. and Patterson G. K., “Correlation of drag reduction with modified Deborah number for dilute polymer solutions”, SOC Pet. Eng. J., pp 325-332 (1967).
* Tabor M. and Gennes P. G., “A cascade theory of drag reduction”, Ero. Phys. Lett, 2, pp 519-522 (1986).
* Cadot O., Bonn D. and Douady S., “Turbulent drag reduction in a closed flow system: boundary layer versus bulk effect”, Phys. Of Fluid, 10, no. 2 (1998).
* Desissler R.G., NASA TN 2138 (1950).
* Roberto B., “A simple model for drag reduction”(www.arxiv: Cond-mat/0210523), 1, Oct. (2002).
* Virk P.S., “Drag reduction fundamentals”, AICHE J., 21 (4), pp 625-656 (1975).
* Coulson J. M. and Richardson J.F., “Chemical engineering”, vol. 1, 3rd edition (1977)