BOUNDARY ELEMENTS MODELLING FOR SMALL/LARGE STRAIN ANALYSIS OF ELASTOMERIC MATERIALS
محتوى المقالة الرئيسي
الملخص
In this paper the boundary elements method is used as numerical techniques for solving elastomeric materials (rubber or rubber-like materials) under small and large strains analysis. Under small deformations, the formulations are based on assuming that the elastomer is linear elastic isotropic incompressible solid. While for the large deformation, the formulation is based on decomposing the 1st Piola-Kirchhoff stresses into linear and nonlinear parts. Thereafter, the final derived equations are composed of both boundary integral and non-linear domain integrals. The non-linear analyses were performed using an incremental procedure with an iterative algorithm.
Solving some numerical examples and comparing the results with that obtained from some available results and ANSYS 10.0 showed that the boundary elements method is a good numerical technique for solving incompressible elastomeric materials. And the formulation used for the boundary elements derivations for large strain analysis gave satisfactory results as compared with that of ANSYS ver. 10.0.
تفاصيل المقالة
كيفية الاقتباس
تواريخ المنشور
المراجع
Bayliss, M.T., and El-Zafrany A. “Numerical modeling of elastomers using the boundary element method,” Commun. numer. methods eng. vol. 20, 789-799, 2004.
Brebbia, C. and Dominguez, J., Boundary Element: An Introductory Course, McGraw-Hill, 1989.
Burn, M., Capuani, D. and Bigoni, D., “A boundary element technique for incremental, non-linear elasticity,” Part I: Formulation, Comput. Methods Appl. Mech. Engrg. 192, 2461-2479, 2003.
Floyd, C.G., “The determination of stress using combined theoretical and experimental measurements,” Proc. 2nd int. Conf., Ed. C.A. Brebbia, 1984.
Fung, Y.C., Foundations of Solid Mechanics, Prentice-Hall, Inc., Englewood Cliffs, NJ, 1965.
Herrmann, L.R., “Elasticity Equations for Incompressible and nearly Incompressible Materials,” AIAA J. 3(10), 1896-1900, 1985.
Gent, A.N., Engineering with Rubber: How to Design Rubber Components, Hanser Publishers, 2001.
Gent, A.N., and Lindley, P.B., “The compression of bonded rubber blocks,” Proc. I. Mech. E., 173: 111-117, 1959.
Kyuichiro Washizo, Varitional Method in Elasticity and Plasticity, Pergamon Press,1975.
Polyzos, D., Tsinopoulos, S. V., and Beskos, D. E., “Static and Dynamic Boundary Element Analysis in Incompressible Linear Elasticity”, Eur. J. Mech. Solids 17, 515-536, 1998.
Rizzo, F. J. and D. J. Shippy, “A Boundary Element Method for Axisymmetric Elastic Bodies”, in Developments in Boundary Element Mothods-4, Eds. P.K. Banerjee, & J.O Watson, 1986.
Shi Shouxia and Yang Jialing, “Large deformation of incompressible rubber cylinder under plane strain,” ACTA Mechanica Solida Sinica, Vol. 12, No. 4, December 1999.
Treloar, L. R. G., The Physics of Rubber Elasticity, 3rd Edition, Clarendon Press, Oxford,