Defects Analysis of Tee-Section Welding Using Friction Stir Welding Process of Aluminum

محتوى المقالة الرئيسي

Qasim M. Doos
Kamaal Sahib Makki

الملخص

Friction stir welding (FSW) of Tee-joints is obtained by inserting a specially designed rotating pin into the clamped blanks, through top plate (skin) to bottom plate (stringer), and then moving it along the joint, limiting the contact between the tool shoulder and the skin. The present work aims to investigate the defects occur for Tee-joint of an Aluminum alloy (Al 5456) with dimensions (180mm x 70mm) for the skin plate, (180mm x 30mm) for stringer plate and thickness of (4mm).
The effects of welding parameters such as rotational speed, linear speed, plunging depth, tool tilting, and die radii of welding fixture on the welding quality of Aluminum Alloy will be studied. Weld defects had been summarized and studied, and then the best conditions that led to good welds had been estimated.
 

تفاصيل المقالة

القسم

Articles

كيفية الاقتباس

"Defects Analysis of Tee-Section Welding Using Friction Stir Welding Process of Aluminum" (2014) مجلة الهندسة, 20(10), ص 120–129. doi:10.31026/j.eng.2014.10.09.

المراجع

 Thurlby, N., 2009, Advances in High Rotatoinal Speed – Friction Stir Welding for Naval Pplications, Wichita State University.

 Fratini, L., Buffa, G., Filice, L. & Gagliardi, F.. ,2005. Friction stir welding of AA6082-T6 T-joints: process engineering and performance measurement, Universita` della Calabria, Italy .

 Acerra, F. ,Buffa , Fratini, L. and Troiano, G., 2009. On the FSW of AA2024-T4 and AA7075-T6 T-Joints: an industrial case study, Springer-Verlag London Limited.

 COLLIGAN, K., 2009.Material Flow Behavior during Friction Stir Welding of Aluminum, American Welding Society.

 Cederqvist, L. and Reynolds, A. P., 2002, Factors Affecting the Properties of Friction Stir Welded Aluminum Lap Joints, springerlink.

 Larsson, H. and Karlsson, L. ,2000, Friction Stir welding of AA 5083 and AA 6082 Aluminium, ESAB AB, Göteborg and Lars-Erik Svensson.

 Adamowski, J. and Szkodo, M., , 2007, Friction Stir Welds (FSW) of Aluminum Alloy AW6082-T6, Journal of Achievements in Materials and Manufacturing Engineering.

 Yousuf, M. O., 2007, Investigation of Mechanical and Icrostructural Characteristics of Friction Stir Welded Joint, PhD The University of Baghdad.

 AL-Joudi, Samer Jasim, 2009, The Influence of Tool Geometry of Friction Stir Weld on Mechanical Properties and Microstructure of 2218-T72 Aluminum Alloy, University of Baghdad .

 KaijiKyokai, Nippon,2010, Guidelines on Friction Stir Welding.

 The American Society for Metals [ASTM], 2003, Metals handbook.

 Kaufman, J. Gilbert & Rooy, Elwin L., 2004. Aluminum Alloy Castings: Properties, Processes, and Applications , Metals handbook.

المؤلفات المشابهة

يمكنك أيضاً إبدأ بحثاً متقدماً عن المشابهات لهذا المؤلَّف.