Employment Employment of Brick Residue in the Production of a Lightweight Concrete
محتوى المقالة الرئيسي
الملخص
The important way to obtain lightweight concrete with compressive strength, density, and thermal insulation properties that differ from normal concrete was by adding materials with cementitious properties to the concrete mix instead of cement or using lightweight aggregate. In most cases, the compressive strength of the lightweight concrete produced was less than that of normal concrete. The aim of this research was to conduct three main objectives. The first objective is to produce lightweight concrete with good compressive strength compared to the same type of concrete by adding chemical additives (Super-Plasticizer S.P and Carbon Powder C.P) to the lightweight concrete mix. The second objective is to recycle the residues of the local brick and use them as coarse aggregates in the production of lightweight concrete. The third objective is to increase the thermal insulation rate of concrete by adding the same r additive. The results were good, concrete was produced from this work with the lowest density of up to (1810 kg/m3) and the highest compressive strength of up to (31.240 MPa) when only carbon powder was added in certain proportions and the density of up to (1944 kg/m3) and compressive strength of up to (31.946 MPa) when adding (Super-Plasticizer) to the same percentages of carbon powder. Compared to ordinary lightweight concrete without chemical additives, its density reaches (1894 kg/m3) and compressive strength (24.848 MPa) at the age of 28 days. In addition, the thermal conductivity values reached about (0.507 W/m.oC), compared to ordinary lightweight concrete (2.242 W/m.oC).
تفاصيل المقالة
كيفية الاقتباس
تواريخ المنشور
الإستلام
النسخة النهائية
الموافقة
النشر الالكتروني
المراجع
Abbas, Z.K., 2022. The Use of Lightweight Aggregate in Concrete: A Review. Journal of Engineering, 28(11), pp.1-13. https://doi.org/10.31026/j.eng.2022.11.01
Abid, R., Kamoun, N., Jamoussi, F. and El Feki, H., 2022. Fabrication and properties of compressed earth brick from local Tunisian raw materials. Boletín de la Sociedad Española de Cerámica y Vidrio, 61(5), pp.397-407. https://doi.org/10.1016/j.bsecv.2021.02.001.
Ajagbe, W.O., Tijani, M.A., Arohunfegbe, I.S. and Akinleye, M.T., 2018. Assessment of fine aggregates from different sources in Ibadan and environs for concrete production. Nigerian Journal of Technological Development, 15(1), pp. 7-13. https://doi.org/10.4314/njtd.v15i1.2.
Ali, A.S., 2018. The Influence of Clay Bricks Dust Incorporation on the Self-Curing of Cement Mortar. Journal of Engineering, 24(12), pp. 73-83. https://doi.org/10.31026/j.eng.2018.12.07
Aljubori, D.E., Al-Hubboubi, S.K. and Alwared, A.I., 2018. Thermal properties of lead-acid battery plastic lightweight concrete. Journal of Engineering, 24(12), pp. 35-44. https://doi.org/10.31026/j.eng.2018.12.04.
ASTM C33, 2003. Standard Specification for Concrete Aggregates. ASTM International.
ASTM C494, 2005. Standard specification for chemical admixtures for concrete. West Conshohocken, PA, USA: ASTM.
Bader, S.A.A., 2015. Structural Sustainability of Lightweight Concrete girder (Doctoral dissertation, University of Kerbala).
Birgisson, B., Taylor, P., Armaghani, J. and Shah, S.P. 2010. American Road Map for Research for Nanotechnology-Based Concrete Materials. Transportation Research Record, 2142(1), pp. 130-137 https://doi.org/10.3141/2142-20.
Concreate, A., 2017. Standard specification for lightweight aggregates for structural concrete. ASTM International.
Dawood, A.O., Hayder, A.K. and Falih, R.S., 2021. Physical and mechanical properties of concrete containing PET wastes as a partial replacement for fine aggregates. Case Studies in Construction Materials, 14, P. e00482. https://doi.org/10.1016/j.cscm.2020.e00482.
Del Rey Castillo, E., Almesfer, N., Saggi, O. and Ingham, J.M., 2020. Light-weight concrete with artificial aggregate manufactured from plastic waste. Construction and Building Materials, 265, p.120199. https://doi.org/10.1016/j.conbuildmat.2020.120199.
Elshahawi, M., Hückler, A. and Schlaich, M., 2021. Infra lightweight concrete: A decade of investigation (a review). Structural Concrete, 22, pp. E152-E168. https://doi.org/10.1002/suco.202000206.
EN, 934-2, 2009. Admixtures for Concrete, Mortar and Grout-Part 2: Concrete Admixtures; Definitions, Requirements, Conformity, Marking and Labelling. British Standards Institution.
Fabbri, A., Soudani, L., McGregor, F. and Morel, J.C., 2019. Analysis of the water absorption test to assess the intrinsic permeability of earthen materials. Construction and Building Materials, 199, pp.154-162. https://doi.org/10.1016/j.conbuildmat.2018.12.014.
Gupta, A. 2021. Investigation of the strength of ground granulated blast furnace slag based geopolymer composite with silica fume. Materials Today: Proceedings, 44, pp. 23-28. https://doi.org/10.1016/j.matpr.2020.06.010.
Habert, G., Miller, S.A., John, V.M., Provis, J.L., Favier, A., Horvath, A. and Scrivener, K.L., 2020. Environmental impacts and decarbonization strategies in the cement and concrete industries. Nature Reviews Earth & Environment, 1(11), pp. 559-573. https://doi.org/10.1038/s43017-020-0093-3.
Hamada, H.M., Alattar, A.A., Yahaya, F.M., Muthusamy, K. and Tayeh, B.A., 2021. Mechanical properties of semi-lightweight concrete containing nano-palm oil clinker powder. Physics and Chemistry of the Earth, Parts a/b/c, 121, p.102977. https://doi.org/10.1016/j.pce.2021.102977.
Han, B., Zhang, L. and Ou, J., 2017. Smart and multifunctional concrete toward sustainable infrastructures, pp. 369-377. Singapore: Springer. https://doi.org/10.1007/978-981-10-4349-9
Hasan, M., Saidi, T. and Afifuddin, M. 2021. Mechanical properties and absorption of lightweight concrete using lightweight aggregate from diatomaceous earth. Construction and Building Materials, 277, P.122324. https://doi.org/10.1016/j.conbuildmat.2021.122324.
He, L. et al. 2021. Research on the properties of rubber concrete containing surface-modified rubber powders. Journal of Building Engineering, 35, P. 101991. https://doi.org/10.1016/j.jobe.2020.101991.
Herki, B.M. 2020. Lightweight concrete using local natural lightweight aggregate. J. Crit. Rev, 7(4), pp. 490-497. https://doi.org/10.31838/jcr.07.04.93
Lee, Y.H., Chua, N., Amran, M., Yong Lee, Y., Hong Kueh, A.B., Fediuk, R., Vatin, N. and Vasilev, Y., 2021. Thermal performance of structural lightweight concrete composites for potential energy saving. Crystals, 11(5), P. 461. https://doi.org/10.3390/cryst11050461.
Li, Y., Zhang, X., Wang, R. and Lei, Y. 2019. Performance enhancement of rubberized concrete via surface modification of rubber: A review. Construction and Building Materials, 227, P. 116691. https://doi.org/10.1016/j.conbuildmat.2019.116691.
Li, Z., Zhou, X., Ma, H. and Hou, D. 2022. Advanced concrete technology: John Wiley & Sons. Canada
Liew, J.Y.R., Chua, Y.S. and Dai, Z., 2019, October. Steel concrete composite systems for modular construction of high-rise buildings. In Structures, 21, pp. 135-149. https://doi.org/10.1016/j.istruc.2019.02.010.
Lu, J.X., Ali, H.A., Jiang, Y., Guan, X., Shen, P., Chen, P. and Poon, C.S., 2022. A novel high-performance lightweight concrete prepared with glass-UHPC and lightweight microspheres: Towards energy conservation in buildings. Composites Part B: Engineering, 247, P.110295. https://doi.org/10.1016/j.compositesb.2022.110295.
Meir, J.V., Cicciarelli, M.R., Ramirez, J. and Lee, R.H. 1995. Alternatives to the Current AASHTO Standard Bridge Sections. https://doi.org/10.5703/1288284313133.
Min, J.K., Dhakal, R., Moss, P., Buchanan, A. and Abu, A. 2012. Modelling the Fire Resistance of Prestressed Concrete Floors using Multi-Spring Connection Elements. Journal of Structural Fire Engineering, 3(1), pp. 1-18. https://doi.org/10.1260/2040-2317.3.1.1.
Mohammed, D., Tobeia, S., Mohammed, F. and Hasan, S., 2018. Compressive strength improvement for recycled concrete aggregate. In MATEC Web of Conferences, 162, p. 02018. EDP Sciences. https://doi.org/10.1051/matecconf/201816202018 .
Mohammed, M.S., ElKady, H. and Abdel-Gawwad, H.A. 2021. Utilization of construction and demolition waste and synthetic aggregates. Journal of Building Engineering, 43, P.103207. https://doi.org/10.1016/j.jobe.2021.103207.
Nagrockiene, D., Girskas, G. and Skripkiūnas, G. 2017. Properties of concrete modified with mineral additives. Construction and Building Materials, 135, pp. 37-42. https://doi.org/10.1016/j.conbuildmat.2016.12.215.
Naik, T.R., 2020. Sustainability of the cement and concrete industries. In Sustainable construction materials and technologies, pp. 19-25. CRC Press. https://doi.org/10.1201/9781003061021.
Ozturk, M., Karaaslan, M., Akgol, O. and Sevim, U.K. 2020. Mechanical and electromagnetic performance of cement-based composites containing different replacement levels of ground granulated blast furnace slag, fly
ash, silica fume and rice husk ash. Cement and Concrete Research, 136, P. 106177. https://doi.org/10.1016/j.cemconres.2020.106177.
Rowland, D.A., 2018. The History of Galveston's Concrete Ships (Doctoral dissertation). Texas A&M University. USA https://hdl.handle.net/1969.1/174364.
Sylva, G.S., 2001. Feasibility of utilizing high performance lightweight concrete in pretensioned bridge girders and panels (Doctoral dissertation, University of Texas at Austin).
Tayeh, B.A., Arafa, M., Alqedra, M., Shihada, S. and Hanoona, H., 2017. Investigating the effect of sulfate attack on compressive strength of recycled aggregate concrete. International Journal of Sustainable Construction Engineering and Technology, 8(2), pp. 66-77.
Top, S., Vapur, H., Altiner, M., Kaya, D. and Ekicibil, A., 2020. Properties of fly ash-based lightweight geopolymer concrete prepared using pumice and expanded perlite as aggregates. Journal of Molecular Structure, 1202, P.127236. https://doi.org/10.1016/j.molstruc.2019.127236.
Wang, J., Tingley, D.D., Mayfield, M. and Wang, Y. 2018. Life cycle impact comparison of different concrete floor slabs considering uncertainty and sensitivity analysis. Journal of Cleaner Production, 189, pp. 374-385. https://doi.org/10.1016/j.jclepro.2018.04.094.
Wu, Y., Krishnan, P., Liya, E.Y. and Zhang, M.H. 2017. Using lightweight cement composite and photocatalytic coating to reduce cooling energy consumption of buildings. Construction and Building Materials, pp. 145, pp. 555-564. https://doi.org/10.1016/j.conbuildmat.2017.04.059.
Yazdanbakhsh, A., Bank, L.C., Baez, T. and Wernick, I. 2018. Comparative LCA of concrete with natural and recycled coarse aggregate in the New York City area. The International Journal of Life Cycle Assessment, 23, pp. 1163-1173. https://doi.org/10.1007/s11367-017-1360-5.