Finite Element Analysis of Shear Performance for Reinforced Concrete T-Beams by Polymer Bars Strengthened with Carbon Fiber Using Embedded Through Section Technique

محتوى المقالة الرئيسي

Hussain Hassan Alhilli
Mahdi Hameed Al-Farttoosi

الملخص

The purpose of this research presents the research results obtained from a numerical simulation using the ABAQUS/CAE version 2019 finite element software. This study tested the shear behavior of T-beams made of reinforced concrete (RC). The structure is reinforced with a carbon fiber reinforced polymer (CFRP) bar embedded through a section (ETS). The numerical validation approach implicated using numerical analysis on the experimental data collected from twelve reinforced concrete (RC) T-beams divide into two groups each group include reference beam, the field of numerical analysis was expanded to encompass the examination of many aspects, such as the impact of the diameter of CFRP bars. The main objective of this project is to create a computational model that accurately transcribes the complex nonlinear properties inherent in beams. This work conducts a comparative investigation of computational and experimental models, with a specific focus on their load-deflection features and cracking patterns. The study found that the average ratio of ultimate load to deflections in numerical model simulations for beams was 1.011, whereas in experimental testing it was 0.928. The research findings establish a clear correlation between the diameter of CFRP bars and the stiffness of a beam, assuming a constant angle of inclination and spacing.

تفاصيل المقالة

كيفية الاقتباس
"Finite Element Analysis of Shear Performance for Reinforced Concrete T-Beams by Polymer Bars Strengthened with Carbon Fiber Using Embedded Through Section Technique" (2024) مجلة الهندسة, 30(9), ص 216–238. doi:10.31026/j.eng.2024.09.11.
القسم
Articles
السيرة الشخصية للمؤلف

Mahdi Hameed Al-Farttoosi، Department of Civil Engineering, College of Engineering, University of Baghdad

Department of Civil Engineering-Asst. Prof.

كيفية الاقتباس

"Finite Element Analysis of Shear Performance for Reinforced Concrete T-Beams by Polymer Bars Strengthened with Carbon Fiber Using Embedded Through Section Technique" (2024) مجلة الهندسة, 30(9), ص 216–238. doi:10.31026/j.eng.2024.09.11.

تواريخ المنشور

الإستلام

2023-09-16

النسخة النهائية

2023-11-10

الموافقة

2023-11-10

النشر الالكتروني

2024-09-01

المراجع

Abbas, H. Q., and Al‐Zuhairi, A. H., 2023. Impact of anchored CFRP composites on the strengthening of partially damaged PC girders. Journal of Engineering, 29(8), pp. 106-120.‏ https://doi.org/10.31026/j.eng.2023.08.08

Abbas, S. A., Izzat, A. F., and Farhan, J. A., 2013. Retrofitting reinforced concrete one–way damaged slabs exposed to high temperature. Journal of Engineering, 19(07), pp. 845-862.‏ https://doi.org/10.31026/j.eng.2013.07.06

Abbasi, A., Benzeguir, Z. E. A., Chaallal, O., and El-Saikaly, G., 2022. FE modelling and simulation of the size effect of RC T-beams strengthened in shear with externally bonded FRP fabrics. Journal of Composites Science, 6(4), pp. 116.‏ https://doi.org/10.3390/jcs6040116.

Abdulkareem, B.F., and Izzat, A.F., 2022. Serviceability of post-fire RC rafters with openings of different sizes and shapes. Journal of Engineering, 28(1), pp. 19-32.‏ https://doi.org/10.31026/j.eng.2022.01.02.

Al-Farttoosi, M., Rafiq, Y., Summerscales, J. and Williams, C., 2013. Nonlinear finite element analysis (fea) of flexural behavior of reinforced concrete beams externally strengthened with CFRP. Advanced Composites in Construction (ACIC) 2013 Conference Proceedings.

Al-Zuhairi, A. H., Al-Ahmed, A. H., Abdulhameed, A. A., and Hanoon, A. N., 2022. Calibration of a new concrete damage plasticity theoretical model based on experimental parameters. Civil Engineering Journal, 8(2), pp. 225-237. http://dx.doi.org/10.28991/CEJ-2022-08-02-03.

Alhilli, H.H. and Al-Farttoosi, M.H., 2023. Shear performance of reinforced concrete t beams strengthened by carbon fiber-reinforced polymer bars. Civil Engineering Journal, 9(10), pp.2411-2429. http://dx.doi.org/10.28991/CEJ-2023-09-10-04.

Benzeguir, Z.E., El-Saikaly, G. and Chaallal, O., 2019. Size effect in RC T-beams strengthened in shear with externally bonded CFRP sheets: Experimental study. Journal of Composites for Construction, 23(6). https://doi.org/10.1061/(asce)cc.1943-5614.0000975.

‏Buyukozturk, O., Gunes, O., and Karaca, E., 2004. Progress on understanding debonding problems in reinforced concrete and steel members strengthened using FRP composites. Construction and Building Materials, 18(1), pp. 9-19. https:doi.org10.1016S0950-0618(03)00094-1.

Barros, Joaquim AO, and G. M. Dalfré., 2013. Assessment of the effectiveness of the embedded through‐section technique for the shear strengthening of reinforced concrete beams. Strain, 49(1), pp. 75-93. https://doi.org/10.1111/str.12016

Chaallal O., Mofidi A., Benmokrane B., and Neale K., 2011. Embedded through-section FRP rod method for shear strengthening of RC beams: Performance and comparison with existing techniques. Journal of composites for construction, 15(3), pp. 374-383. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000174.

Chen, H., Yi, W.J., Ma, Z.J. and Hwang, H.J., 2019. Shear Strength of Reinforced Concrete Simple and Continuous Deep Beams. ACI Structural Journal, 116(6). https://doi.org/10.14359/51718003

Daneshvar, K., Moradi, M. J., Khaleghi, M., Rezaei, M., Farhangi, V., and Hajiloo, H., 2022. Effects of impact loads on heated-and-cooled reinforced concrete slabs. Journal of Building Engineering, 61(1), P. 105328.‏ https://doi.org/10.1016/j.jobe.2022.105328.

Deniaud, C., and Roger Cheng, J. J., 2003. Reinforced concrete T-beams strengthened in shear with fiber reinforced polymer sheets. Journal of Composites for Construction, 7(4), pp. 302-310. https://doi.org/10.1061/(ASCE)1090-0268(2003)7:4(302).

Faron, A., and Rombach, G. A., 2020. Simulation of crack growth in reinforced concrete beams using extended finite element method. Engineering Failure Analysis, 116(1), pp. 104698.‏ https://doi.org/10.1016/j.engfailanal.2020.104698.

Faron, A., and Rombach, G. A., 2023. Discrete crack propagation analysis of reinforced concrete beams under shear. In AIP Conference Proceedings, 2848(1), AIP Publishing. https://doi.org/10.1063/5.0145044%20‏.

Feng, D. C., Ren, X. D., and Li, J., 2018. Softened damage-plasticity model for analysis of cracked reinforced concrete structures. Journal of Structural Engineering, 144(6), pp. 04018044.‏ https://doi.org/10.1061/(ASCE)ST.1943-541X.0002015.

Ghadhban, Hadi Nasir., 2007. Effect of beam size on shear strength of reinforced concrete normal beams. Journal of Engineering and Development, 11(1).

Godat, Ahmed, Omar Chaallal, and Kenneth W. Neale., 2013. Nonlinear finite element models for the embedded through-section FRP shear-strengthening method. Computers and Structures, 119(1), pp. 12-22. https://doi.org/10.1016/j.compstruc.2012.12.016.

Hafezolghorani, M., Hejazi, F., Vaghei, R., Jaafar, M. S. B., and Karimzade, K., 2017. Simplified damage plasticity model for concrete. Structural Engineering international, 27(1), pp. 68-78.‏ https://doi.org/10.2749/101686616X1081.

Izzat, A. F., 2015. Retrofitting of reinforced concrete damaged short column exposed to high temperature. Journal of Engineering, 21(3), pp. 34-53.‏ https://doi.org/10.31026/j.eng.2015.03.03.

Kachlakev, D. I., Miller, T. H., Potisuk, T., Yim, S. C., and Chansawat, K., 2001. Finite element modeling of reinforced concrete structures strengthened with FRP laminates. (No. FHWA-OR-RD-01-XX). Oregon. Dept. of Transportation. Research Group. https://rosap.ntl.bts.gov/view/dot/23018.

Mahmud, G. H., Yang, Z., and Hassan, A. M., 2013. experimental and numerical studies of size effects of ultra high performance steel fiber reinforced concrete (UHPFRC) beams. Construction and Building Materials, 48(1), pp. 1027-1034.‏ http://dx.doi.org/10.1016/j.conbuildmat.2013.07.061.

Mhanna, Haya H., Rami A. Hawileh, and Jamal A. Abdalla., 2019. Shear strengthening of reinforced concrete beams using CFRP wraps. Procedia Structural Integrity, 17 (1), pp. 214-221. https://doi.org/10.1016/j.prostr.2019.08.029.

Najaf, E., Orouji, M., and Ghouchani, K., 2022. Finite element analysis of the effect of type, number, and installation angle of FRP sheets on improving the flexural strength of concrete beams. Case Studies in Construction Materials, 17(1). https://doi.org/10.1016/j.cscm.2022.e01670.

Naqe, A. W., and Al-zuhairi, A. H., 2020. Strengthening of RC beam with large square opening using CFRP. Journal of Engineering, 26(10), pp. 123-134. https://doi.org/10.31026/j.eng.2020.10.09.

‏‏Naqi, Aya Waleed, and Alaa H. Al-zuhairi., 2020. Nonlinear finite element analysis of RCMD beams with large circular opening strengthened with CFRP material. Journal of Engineering, 26 (11), pp. 170-183.‏ https://doi.org/10.31026/j.eng.2020.11.11.

Qapo, M., Dirar, S., and Jemaa, Y., 2016. Finite element parametric study of reinforced concrete beams shear-strengthened with embedded FRP bars. Composite Structures, 149(1), pp. 93-105. https://doi.org/10.1016/j.compstruct.2016.04.017.

Raza, A., and Ahmad, A., 2019. Numerical investigation of load-carrying capacity of GFRP-reinforced rectangular concrete members using CDP model in ABAQUS. Advances in Civil Engineering. https://doi.org/10.1155/2019/1745341.

Raza, A., and Khan, Q. U. Z., 2020. Experimental and numerical behavior of hybrid-fiber-reinforced concrete compression members under concentric loading. SN Applied Sciences, 2(4), pp. 701.‏ https://doi.org/10.1007/s42452-020-2461-5.

Tran, D. A., Shen, X., Sorelli, L., Ftima, M. B., and Brühwiler, E., 2023. Predicting the effect of non-uniform fiber distribution on the tensile response of ultra-high-performance fiber reinforced concrete by magnetic inductance-based finite element analysis. Cement and Concrete Composites, 135(1), pp. 104810.‏ https://doi.org/10.1016/j.cemconcomp.2022.104810.

Turki, A. Y., and Al-Farttoosi, M. H., 2023. Flexural strength of damaged RC beams repaired with carbon fiber-reinforced polymer (CFRP) using different techniques. Fibers, 11(7), pp. 61. https://doi.org/10.3390/fib11070061.

Yang, X., Liu, L., and Wang, Y., 2018. Experimental test and numerical simulation of the initial crack reinforced concrete beam in bending. In IOP Conference Series: Earth and Environmental Science, 186(2), pp. 012056. https://doi.org/10.1088/1755-1315/186/2/012056.

Zhang, J., Zhang, Z., and Chen, C., 2010. Yield criterion in plastic-damage models for concrete. Acta Mechanical Solida Sinica, 23(3), pp. 220–230. https://doi.org/10.1016/s0894-9166(10)60024-9.

المؤلفات المشابهة

يمكنك أيضاً إبدأ بحثاً متقدماً عن المشابهات لهذا المؤلَّف.