DESIGN OPTIMIZATION OF SERIAL ROBOT MANIPULATOR

محتوى المقالة الرئيسي

Ahmed A.A.
Alyaa H.A

الملخص

Optimal design of three links and four links serial manipulator involves striking a balance between an
appropriate link length, radius, link exact end effecter deflection and the amount of stress induced in each
link. Optimization has been applied for getting a minimum robot weight through making the robot arm
section tapered while keeping the first link as cylindrical tube as it represent the robot base only. The
synthesis optimization problem involves setting up guess values for links length and radius subjected to
constraints of deflection, stress and geometric constraints of total robot length. The optimization process
focuses on minimization of robot weight as an objective function, the guess values has taken from three links manipulator and the industrial robot as four links serial manipulator. The results of optimization has been plotted and represented through the different relations between the design parameters (Link radius, length and total robot deflection, total robot weight, stress…etc). The results shows a good agreement minimizing the total deflection to(2x10-5 m) with this degree of precision an optimum design features may be obtained that gives a robot structure with high stiffness and minimum weight that enables the robot to do its tasks with minimum inertia effect.

تفاصيل المقالة

كيفية الاقتباس
"DESIGN OPTIMIZATION OF SERIAL ROBOT MANIPULATOR" (2011) مجلة الهندسة, 17(03), ص 558–576. doi:10.31026/j.eng.2011.03.16.
القسم
Articles

كيفية الاقتباس

"DESIGN OPTIMIZATION OF SERIAL ROBOT MANIPULATOR" (2011) مجلة الهندسة, 17(03), ص 558–576. doi:10.31026/j.eng.2011.03.16.

تواريخ المنشور

المراجع

• Chinyere Onwbiko(2000)’’Introduction to Engineering Design Optimization’’ Prentice- Hall,Inc.

• Ceccarelli, M., Carobone, G. and Ottaviano, E.(2005) “Multi Criteria Optimum Design of Manipulators”, Bulletin Technical Sciences Vol.53, No.1, P.P.9-18.

• Edward Mebarak.(2003) “On the Development of an Automated Design Procedure to Design Optimal Robots”, M.Sc.Thesis, Florida International University, Miami, Florida.

• Grace A’’Optimization Toolbox Users Guide’’,The Matlab Works,Inc,1992.

• John, J. Craig. (1989). “Introduction to Robotics Mechanics and Control”, Addison- Wesley.

• Merlet J.P.(2002)’’Optimal Design of Robots’ ’INRIA Sophia, Antipolis, France. Robotics and Automation Proceedings,ICRO,IEEE International Conference,Vol 2,PP1149-1154.

• Shiakolas, P. S.; Koladiya, D. and Kebrle, J.(2002) “Optimum Robot Design Based on Task Specifications Using Evolutionary Techniques and Kinematic, Dynamic, and Structural Constraints”, International Journal of

Inverse Problem in Engineering.Vol.10, No.4, P.P.359-375.