REMOVAL OF SCALE DEPOSITED ON THE INTERNAL SURFACES OF PIPES IN COOLING SYSTEMS
محتوى المقالة الرئيسي
الملخص
The possibility of using inhibited hydrochloric acid in descaling of water deposits on heat exchanger and cooling system tubes have been investigated. A dynamic flow system was designed for this state. Experiments were carried out using different, temperatures, solution flow rates,times, and different hydrochloric acid concentrations inhibited with Hexamine. Kinetics of acid iron oxide scale reaction was studied using hydrochloric acid The kinetics analysis showed that the acid- FeO scale reaction followes 1st order reaction. It was found that the FeO scale removal was mass transfer controlling process. Iron- oxide scale removal process was analyzed as mass transfer operation and adequate semi- empirical correlations for scale removal (or mass transfer rate) under different conditions, in a dimensionless form have been obtained. The results of iron- oxide scale removal (or mass transfer rate) are compared with many proposed models particularly those based on the concept of analogy among momentum and mass transfer. Prandtl- Taylor analogy showed a good agreement with experimental mass transfer results.
تفاصيل المقالة
كيفية الاقتباس
تواريخ المنشور
المراجع
Bennett, C.O., and J.E. Myers, (1982), Momentum heat and mass transfer, 3rd ed., Mc Unit States,.
Berger, F.B., (1977), and K.F. Hau, Int J. heat mass trans, vol. 20, P.1185..
Bradley, G.W. and J.A. Smith, (1973), Mtis Prot. And performance, 12,48,
Brodkey, R.S. and HC.Hershey, (1988), transport phenomena; Aunified approach, MC Graw-Hill 516-20
Charles M. Loucks, (1962), chemistry tackle plant maintenance, chemical engineering vol.69 March 5.
Colbum, A.P., (1964), Trans. AICHE, vol. 29,p. 174, 1933, Republished in J.Heat Mass Transfer vol. 7, p. 139,
Coulson, J.M., and J.F. Richardson, (1977), chemical engineering, 3rd edition.
Darshanlal, T., T. Wasan, and C.R. Wike, (1964), Int. J. heat mass trans., vol. 7, P.87..
Hasan AL- AUAS, B.O., (2003), PhD. Thesis, Dept. Chem. Eng., Saddam University, Baghdad February.
Kandikar, S.G., (2001), S.Joshi,S. Tian, Heat Transfer For Conference, 35th National, AMSE California,.
Knudsen, J.G. and D.I..Katz, (1958), Fluid Dynamics and heat transfer, Mc Graw-Hill, New York,.
Mahato, B.K., B.K., (1980), C.Y. Cha, and W. Schemlit, Corro, Sci., vol. 20, P421,.
Mansfield, G.H. and R.J. (1990), Terrell L.C.L.Engineering Division Winington, General wate treatment to prevent fouling in cooling water (internet document).
Moore, R.E., A.E. Bischof, J.D. Robins, and D.R. Brenneman, (1972), Mtls Prot. and Perfo: 11,3,41.
Precautionary procedures in chemical cleaning report of NACE Technical Unit Committee T-8A Chemical Cleaning. Corrosion, 15,17t (1959), January.
Chloride Stress Corrosion Cracking of Austenitic Stainless Steels, Report of NACE U Committee T-8A On Chemical Cleaning Corrosion, 15,69t (1959) February.
Petukhov, B.S., (1970), Heat transfer and friction in Turbulent pipe flow with variable physi properties, Advances in heat trans., vol.6, 503,
Philip J.w. Roberts and Danald R. Webster, (2002), Turbulent Diffusion, School of Civil Environmental Engineering, Georgia, Institute of Technology, Altantas.
-Powell,S.T., (1954), Water conditioning for industry, 1" ed., Mc Graw-Hill. -Poulson, B., (1983), corrosion science, vol. 23, No.1 P.391,..
-Reynolds, O., (1874), Process Manchester Lit. phil soc. 14:7, (cited in 55)
-Schmidt, N.O., and W.S., (1958), wise, Ind. Eng. Chem, 50,5,811.
Tewari, P.H. and Campell, A.B. J.phys Chem., (1976), vol. 80, P.1844.