APPLICATION OF VIBRATION MEASUREMENT TO DETECT DAMAGE IN CASTING

محتوى المقالة الرئيسي

Adnan N. Jameel Al-Tamimi
Ehab N. Abbas

الملخص

Modal testing has become commonplace in many industries today as a research and development tool. In this capacity, it is used primarily during product prototype development and for vibration problem in general. Many types of structural or parts faults will cause changes in the measured dynamic response of a structure. These changes will, in turn, cause change in the structure's modal parameter. The purpose of the present work is to propose an improved damage detection and location based on the measurement of modal parameter (natural frequency and mode shape) before and after faults, which they have varying extents, for three different sizes of Aluminum casing plates. This local damage can be translated into or characterization as a reduction of the local stiffness which, simulated in the presented numerical models using software package. After measured natural frequency, if a change is detected a statistical method is used to make the best match between the measured changes in frequencies and the family of the theoretical predictions. This predicts the most likely defect location. Analytical results are also used to check numerical results, which showed a good agreement with it. Standard Aluminum plates were also investigated in this work. It results were compared with casting results for two boundary conditions. Also, the defect location charts that plotted with the support of deriving stiffness sensitivity equation showed a good agreement between the predicted defect site and the actual defect location for most of the study cases

تفاصيل المقالة

كيفية الاقتباس
"APPLICATION OF VIBRATION MEASUREMENT TO DETECT DAMAGE IN CASTING" (2006) مجلة الهندسة, 12(01), ص 113–126. doi:10.31026/j.eng.2006.01.09.
القسم
Articles

كيفية الاقتباس

"APPLICATION OF VIBRATION MEASUREMENT TO DETECT DAMAGE IN CASTING" (2006) مجلة الهندسة, 12(01), ص 113–126. doi:10.31026/j.eng.2006.01.09.

تواريخ المنشور

المراجع

Blevins Robert D. (1979), Formula for Natural Frequency and Mode Shape, Van Nostrand Reinhold Company, USA,.

Cawely P. and Adams R.D. (1979), The Location of Defects in Structures From Measurements of Natural Frequencies, J. of Strain Analysis, Vol.14, No.2, PP.49-57,.

Courant R. and Hilbert D. (1953), Method of Mathematical Physics, IntelliSense Publishers, Vol. I, first edition, London,. Gorman D.J. (1978), Free Vibration Analysis of The Completely Free Rectangular Plate by the Method of Superposition, J. of Sound and Vibration. Vol. 57, No.3, PP. 437-447..

Lauwagie T., Sol H., and Guill P. (2002), Identification of Distributed Material Properties Using Measured Modal Data", Proceeding of ISMA Conference..

Mannan M.A. and Richardson M.H. (1991), Determination of Modal Sensitivity functions for Location of Structural Faults", 9" IMAC Proceeding, Florence, Italy, April.

Srinivasan R. (1982), Mechanical Vibration Analysis, McGraw-Hill Book Company (UK) Limitec London..

Victor Giugriutiu and Andrei Zagrai (2001), electro-Mechanical Impedance Method for Crack Detection in Metallic Plate", 6th Annual Int. symposium on NDE for Health Monitoring and Diagnostics, 4-8 March