EFFECT OF COOLING RATE ON MECHANICAL PROPERTIES OF EUTECTIC AND HYPOEUTECTIC Al-Si ALLOYS
محتوى المقالة الرئيسي
الملخص
In this research the effect of cooling rate and mold type on mechanical properties of the eutectic
and hypoeutectic (Al-Si) alloys has been studied. The alloys used in this research work were (Al- 12.6%Si
alloy) and (Al- 7%Si alloy).The two alloys have been melted and poured in two types of molds with
different cooling rates. One of them was a sand mold and the other was metal mold. Mechanical tests
(hardness, tensile test and impact test) were carried out on the specimens. Also the metallographic
examination was performed.
It has been found that the values of hardness for the alloys(Al-12.6%Si and Al-7%Si) which poured in
metal mold is greater than the values of hardness for the same alloy when it poured in a heated metal
mold at different temperatures or in sand mold. The strength and impact resistance for the alloys (Al-
12.6%Si and Al-7%Si) are greater when these were poured in a metal molds than that when it poured in a
sand mold.
Furthermore, the higher cooling rates enhance the strength, hardness and impact resistance for the
two alloys, while the low cooling rates reduces these mechanical properties.
The percentage of elongation and the amounts of formed porosity decreased when the cooling rates
increased
تفاصيل المقالة
كيفية الاقتباس
تواريخ المنشور
المراجع
- I. J. Polmear “Light Metals”, Second edition, P(147-152), 1989. Routledge, chpman and Hall, Inc.
- M. F. Hafiz and T. Kobayashi “Fractutoughness of eutectic Al-Si casting alloy with different microstructural features”, J.Materials Science, V 31 p( 6195-6200),1996.
- J. P. Anson and J. E. Gruzleski “ The Quantitive Discrimination between shrinkage and gas microporosity in cast aluminum alloys using spatial data analysis”, Materials Characterization 43, p(319-335), 1999.
- J. P. Anson and J. E. Gruzleski “Effect of Hydrogen content on relative shrinkage and gas microporosity in Al-7%Si casting”, AFS Transactions, p(135-141),2000.
- Mark E. Seniw, James G. Conley and Morris E. Fine “The effect of microscopic inclusion locations and silicon segregation on fatigue lifetimes of aluminum alloy A356 castings”, Materials Science and Engineering, A285 (43–48), 2000.
- Haizhi Ya “An Overview of the Development of Al-Si alloy based material for engine applications”,J. Materials Engineering and Performance,V12, P(288-297),2003.
- John A. Taylor “The effect of iron in Al-Si casting alloys”, Cooperative Research Centre for Cast Metals Manufacturing (CAST), 2004.
- J. Kajornchaiyakul,R. Sirichaivejakul, n. Moonrin “Solidification characteristics and mechanical properties of hypoeutectic aluminum – silicon alloy containing sulfur”, la metallurgia italiana, V10,p(47-50),2005.
- L.A. Dobrzański , R. Maniara , J.H. Sokolowski “The effect of cast Al-Si-Cu alloy solidification rate on alloy thermal characteristics”, J. of Achievements in Materials and Manufacturing Engineering 17 p(217-220),2006.
- Abdulwahab, M., Shehu, U. and Bello.K.A “Comparative Study of the Hardness and Impact Energy of As-cast and Age-hardened Al-Si-Fe- MnCr Alloy”, J. of Applied Sciences Research, 3(9): p(823-827), 2007.
- Kyuhong Lee , Yong Nam Kwon , Sunghak Lee “Effects of eutectic silicon particles on tensile
properties and fracture toughness of A356 aluminum alloys fabricated by low-pressurecasting, casting-forging, and squeeze-casting processes”, J. of Alloys and Compounds 461 p( 532–541), 2008.
- Abhishek Sharma “Strength and Fracture studies of as-cast Al-Si-Cu alloys”, Ms.c. Thesis, School of physics and materials science, Thapar University, patiala, India, 2008.
- F. Grosselle, G. Timelli, F. Bonollo, A. Tiziani, E. Della Corte “Correlation between microstructure
and mechanical properties of Al-Si cast alloys”, la metallurgia italiana, Alluminio e leghe, p (25-32) 2009.
- Mathew Philip and Bill Bolton “Technology of Engineering Materials”, first edition, P (46), 2002.
-T.Uddin, PhD Thesis, University of Birmingham, UK, 1991.