Influence of Sustainable Materials and Glass Fibers on Properties of Lightweight Perlite Concrete
محتوى المقالة الرئيسي
الملخص
The effect of the addition of sustainable materials and alkali-resistant glass fibers on perlite concrete is studied in this paper. The research includes slump, density, flexural strength, split tensile strength, compressive strength, and thermal conductivity tests. This specimen was cast using Portland cement, metakaolin (which replaced 15% of the cement weight as pozzolanic materials), a combination of coarse and fine perlite aggregate, superplasticizer, and local ash (which was employed as a filler and replaced by cement weight in a ratio of 10%). The ratio of cement to perlite (volumetric ratio) was 1:2. The concrete reinforced 1% alkali resistance glass fibers by volume of concrete. The results show that adding sustainable materials to the concrete increased its cylinder compressive strength by a percentage of (57.75%, 41.76%, and 44.82%) for 7,28 and 60 days, respectively and both tensile and flexural strength increased at a ratio of (37.28%, 30.33% and 34.5%), (36.05%, 68.22% and 56.52%) respectively at (7,28 and 60 days). And including alkali-resistant glass fibers increases the compressive, tensile and flexural strength in a ratio of (61.5%, 43.58%, 47.45%), (61.54%, 44.08% and 52.71%) and (113.95%, 124.3% and 97.85%) respectively at (7,28 and 60 days), compared with reference mix. The density increased by adding sustainable materials and fibers but stayed within the limitations of structural lightweight concrete (ASTM C330). The thermal conductivity also increased after adding sustainable materials and glass fibers compared with the reference mix, but it was within the constraints of insulation concrete.
تفاصيل المقالة
كيفية الاقتباس
تواريخ المنشور
الإستلام
النسخة النهائية
الموافقة
النشر الالكتروني
المراجع
ACI 211.2, 1998. Standard Practice for Selecting Proportions for Structural Lightweight Concrete. https://api.semanticscholar.org/CorpusID:62830351.
ACI 213, 2014. Guide for structural lightweight-aggregate concrete. Committee and American Concrete Institute.
Ahmed, M. F., 2021. Utilization of Iraqi metakaolin in special types of concrete: A review based on national researches. Journal of Engineering. 27(8), pp. 80–98. https://doi.org/10.31026/j.eng.2021.08.06.
Al-Hdabi AT, Dakhil KS, and Qasim HA, 2016. Improvement of asphalt concrete mixtures by adding pulverized fuel ash as filler. Journal of Engineering. 22(10), pp. 1–15. https://doi.org/10.31026/j.eng.2016.10.01.
Arifuzzaman M. D., and Ho-Sung K., 2014. Development of new perlite/sodium silicate composites. International Conference on Mechanical, Industrial and Energy Engineering https://api.semanticscholar.org/CorpusID:59053680.
ASTM C1113, 2009. Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique). https://doi.org/10.1520/C1113_C1113M-09.
ASTM C1116, 2009. Standard Specification for Fiber-Reinforced Concrete. https://doi.org/10.1520/C1116_C1116M-09.
ASTM C128, 2015. Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate. https://doi.org/10.1520/C0128-1.
ASTM C143, 2012. Standard Test Method for Slump of Hydraulic-Cement Concrete. https://doi.org/10.1520/C0143_C0143M-12.
ASTM C1666, 2008. Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement. https://doi.org/10.1520/C1666_C1666M-08.
ASTM C192, 2019. Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory. https://doi.org/10.1520/C0192_C0192M-1.
ASTM C293, 2016. Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading). https://doi.org/10.1520/C0293_C0293M-16.
ASTM C330, 2017. Standard Specification for Lightweight Aggregates for Structural Concrete. https://doi.org/10.1520/C0330_C0330M-17A.
ASTM C332, 2017. Standard Specification for Lightweight Aggregates for Insulating Concrete. https://doi.org/10.1520/C0332-17.
ASTM C39, 2001. Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens. https://doi.org/10.1520/C0039_C0039M-01.
ASTM C494, 2017. Designation: C494/C494M − 17 Standard Specification for Chemical Admixtures for Concrete. https://doi.org/10.1520/C0494_C0494M-17.
ASTM C496, 2011. Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens. https://doi.org/10.1520/C0496_C0496M-1.
ASTM C567, 2014. Standard Test Method for Determining Density of Structural Lightweight Concrete. https://doi.org/10.1520/C0567_C0567M-14.
ASTM C618, 2019. Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete. https://doi.org/10.1520/C0618-1.
Bagdassarov, N., Ritter, F., and Yanev, Y., 2001. Kinetics of perlite glasses degassing. TG and DSC analysis. Fuel and Energy Abstracts. 42(1), pp. 58. https://doi.org/10.1016/S0140-6701(01)80621-4.
BS-EN-12390-3, 2019. Testing hardened concrete. Part 3, Compressive strength of test specimens. https://www.techstreet.com/standards/bs-en-12390-3-2019?product_id=2077952.
Chandra, S., Berntsson, L., 2002. Lightweight aggregate concrete microstructure, in lightweight aggregate concrete. Noyes Publications/William Andrew Publishing, pp. 131–166. https://doi.org/10.1016/B978-081551486-2.50009-2.
Dawood, E.T. and Hamad, A.J., 2013. High performance lightweight concrete reinforced with glass fibers. AL-Mansour Journal, 20(1), pp.73-87. https://www.journal.muc.edu.iq/index.php/journal/article/view/241.
Fawzi, N. M., Aziz, K. I., Hama, S. M., 2013. Effect of metakaolin on properties of lightweight Porcelinate aggregate concrete. Journal of Engineering. 19(4), pp. 439–452. https://doi.org/10.31026/j.eng.2013.04.02.
IQS 1703, 2018. Iraqi Standard Specification for Water Used for Concrete and Mortar.
IQS No.5, 2019. Iraqi Standard Specification, Portland cement.
Jedidi, M., Benjeddou, O., Soussi, C., 2015. Effect of expanded perlite aggregate dosage on properties of lightweight concrete. Jordan Journal of Civil Engineering. 9(3), pp. 378–391. https://doi.org/10.14525/jjce.9.3.3071.
Karakoç, M. B., Demirboga, R., 2010. HSC with expanded perlite aggregate at wet and dry curing conditions. Journal of Materials in Civil Engineering. 22(12), pp1252–1259. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000134.
Khonsari, E. E., Anvari, A., 2010. Effects of expanded perlite aggregate (EPA) on the mechanical behavior of lightweight concrete. Korea Concrete Institute. https://framcos.org/FraMCoS-7/11-10.pdf.
Leong, G. W., Mo, K. H., Loh, Z. P., Ibrahim, Z., 2020. Mechanical properties and drying shrinkage of lightweight cementitious composite incorporating perlite microspheres and polypropylene fibers. Construction and Building
Materials. 246. https://doi.org/10.1016/j.conbuildmat.2020.118410.
Mehta, P.K. and Monteiro, P.J., 2006. Concrete: microstructure, properties, and materials. New York: McGraw-Hill. https://searchworks.stanford.edu/view/6345107.
Mirza, F. A., Soroushian, P., 2002. Effects of alkali-resistant glass fiber reinforcement on crack and temperature resistance of lightweight concrete. Cement and Concrete Composites. 24(2), pp. 223–227. https://doi.org/10.1016/S0958-9465(01)00038-5.
Mladenovič, A., Šuput, J. S., Ducman, V., Škapin, A. S., 2004. Alkali–silica reactivity of some frequently used lightweight aggregates. Cement and Concrete Research. 34(10), pp. 1809–1816. https://doi.org/10.1016/j.cemconres.2004.01.017.
Mohammad, B., Ali, D., Hassan S., 2023. Energy dissipation capacity of an optimized structural lightweight perlite concrete. Construction and Building Materials. 389, P. 131765. https://doi.org/10.1016/j.conbuildmat.2023.131765.
Neville, A. M., Brooks, J.J. 2010. Concrete Technology. Prentice Hall. https://www.academia.edu/15409768/_Adam_M_Neville_J_J_Brooks_Concrete_Technology.
Owens, G., 2009. Fulton’s concrete technology. Cement & Concrete Institute (South Africa). https://search.worldcat.org/title/432008127.
Rajendran, M., Lavanya, N., 2019. Influence of perlite and glass fiber on the compressive, split tensile and flexural strength of concrete incorporating glass fiber. https://www.ijitee.org/wp-content/uploads/papers/v8i3/C2613018319.pdf.
Ramezanianpour, A.A., 2014. Cement Replacement Materials., Springer Geochemistry/Mineralogy. Berlin, Heidelberg: Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-642-36721-2.
Sengul, O., Azizi, S., Karaosmanoglu, F., Tasdemir, M.A., 2011. Effect of expanded perlite on the mechanical properties and thermal conductivity of lightweight concrete. Energy and Buildings. 43(2–3), pp. 671–676. https://doi.org/10.1016/j.enbuild.2010.11.008.