THREE-DIMENSIONAL FINITE ELEMENT ANALYSES OF A SINGLE PILE IN AN ELASTOPLASTIC CLAYEY SOIL
محتوى المقالة الرئيسي
الملخص
A three-dimensional coupled finite element analysis algorithm is developed to predict the behaviour of single piles in clay. Three dimensional 20-noded brick elements are used in the analyses carried out on three documented field studies. Each node carries four degrees of freedom, three being for displacements in the three perpendicular space dimensions while the fourth is allocated for pore water pressure. The behaviour of the material of the pile is idealized through a linear elastic constitutive relationship while that for the soil by the Modified Cam-Clay model both extended to cover three-dimensional characteristics. The load-displacement results from the developed algorithm on the three selected problems from literature show a very good agreement with the observations. Moreover, the build-up of pore fluid pressures and their dissipations were found to be consistent with field measurements also.
تفاصيل المقالة
كيفية الاقتباس
تواريخ المنشور
المراجع
Al-Anbaki, "Three-Dimensional Analysis of Single Pile in Clay By The Finite Element Method", A thesis submitted to the Department of Civil Engineering of the University of Baghdad for the degree of Master of Science, 2006.
Al-Baghdadi, N. H., (2006), "Soil-Pile Analysis by the Finite Element Method". A thesis submitted to the Civil Eng. Dept. of the University of Kufa for the partial fulfillment of the degree of Masters of Science.
Al-Damluji, O F., (1981), "Non-Linear Soil Behaviour by Finite Element Method", M.Sc. Thesis, College of Engineering, University of Baghdad, Iraq.
Al-Damluji, O. F. S. (1994), "Dynamic Penetration Contact Problems with Particular Reference to Porous Media", Ph.D. Thesis, College of Engineering. University of Baghdad.
Al-Marsumi, M. R., (2003), The Effect of Time on Concrete Piles by Three- Dimensional Finite Element Analysis", A thesis submitted to the Building and Construction Engineering Dept. of the University of Technology, Baghdad, for the partial fulfillment of the degree of Doctorate of Science.
Atkinson 1. H. and Bransby P.L., (1978); "The Mechanics of Soils, An Introduction to Critical State Soil Mechanics, McGraw-Hill Book Company. Londan, UK.
Bathe, K. J., (1996), "Finite Element procedure", Prentice-Hall International
Bhowmilk, S., and Leng, J. H., (1990), "Application of Bounding Surface Plasticity Model in the Analysis of Axially Loaded Piles", Proceedings of the Third International Conference on Numerical Methods in Engineering: Theory and Applications (NUMETA 901, 7-11 January, 1990, University College of Swansea, Swansea, Wales, U.K.
Βίοι, Μ. Α., (1955). Theory of Elasticity and Consolidation for a Porous Anisotropic Salid, Journal of Applied Physics, Volume 26, pp. 182-185.
Biot, MA, (1956), "Theory of Propagation of Elastic Waves in a Fluid Saturated Porous Solid loumal of the Acoustical Society of America, Volume 28, No. 2, March, pp.168-191
Cooke R. W, Price Gi and Tan K., (1979), "Jacked Piles in London Clay: A Study of Load Transfer and Settlement under Working Conditions" Geotechnique, Volume 29, No. 2, P.P 113-147
Desai, C.S. (1978) Effects of Driven and Subsequent Consolidation on Behaviour of Driven piles International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 2. pp. 283-301
Desai, C. S. and Siriwardane, 11. 1. (1984), Constitutive Laws for Engineering Materials with Emphasis on geologic Materials Prentice-Hall, Inc., Englewood Cliffs, New Jersey.
Grande 1 and Nordal S. (1979) "Pile-Soil Interaction Analysis on Effective Stress Basis Recent Developments in the Design and Construction of Piles, ICE Landon
Kirby KC and Isrng M.I. (1979) "Further Development of a General Effective Stress Method for Prediction of Axial Capacity for Driven Piles in Clay Recem Developments in the Design and Construction of Piles, ICL London
Kuhlemeyer, R., (1979), “Bending Element for Circular Beams and Piles”, ASCE Journal of the Geotechnical Engineering Div, Volume: 105 Number: GT2, pp 325-330
Levis, R. W Schrefler, Deformation and Consolidation London (1987) "The Finite Element Method in the Parsas Media, John Wiley and Sons Lid
Maharaj D. K, Gayarı J. and Jaynashi D., (2004), "Uplift Capacity of Pile by the Finite Element Method", Electronic Journal of Geotechnical Engineering, Vol. 8. P.PA14-420
Ottaviani, M., and Marchetti, S., (1979), "Observed and Predicted Test Pile Behaviour, International Journal for Numerical Methods in Geomechanics, Vol. 3. pp. 131-143
Owen, D. R. 1. and linton, E (1980), “Flaite Elements in Plasticity-Theory and Practice ”, Pineridge Press Lul, Swansea
Pal SC and Parah S. K. (1950), "Linear Axi-symmetric Finite Element Analysis of Concrete Piles in Nonhomogeneous Clay Soil, Journal of Indian Geotechnique No.3. vol. 10. PP. 185-202
Phoon, K. K. Quek, S. T. Chow, Y. K. and Lee, S. L .,(1990) "Reliability Analysis of Pile Settlement", Journal of Geotechnical Engineering, ASCE, Vol 116, No. 11. November 1990 pp. 1717-1735
Raherm, A. M. (2005), "Pile-Soil Interaction Analysis an Effective Stress Basis" a thesis submitted to civil Eng. Dept. of the University of Baghdad for the partial fulfillment of the degree of Masters of Science
Randolph M.F. and Worth C. P.,(1978), "Analysis of Deformation of Vertically Loaded Piles" Geotechnique, Vol. 1, No 12. PP. 1465148K
Randolph M.F. Carter IP and Worth, (1979), "Driven Piles in Clay The Effects of Installation and Subsequent Consolidation" Geotechnique, Vol. 9,No.4,p.p.361-393
Reddy,j.N.(1984), An Introduction to the Finite Element Method"McGraw-Hill international editions.
Saada, A. S.,(1974), "Elasticity, "Theory and Application" Pergamon Press lnc.
Seed, H. B., and Reese, L. C., (1955), "The Action of Soft Clay along Friction Piles", Transactions of the ASCE, Vol. 23, No. 122, P.P. 731-754.
Smith, I. M and Griffiths, D. V., (1988), "Programming the Finite Element Method", 2 Edition, John Wiley and Sons. Inc.
Yasser, A. K. and Hassiotis, S., (2001); "Analysis of Pile Soil Interaction", Geotechnique, Vol. 22, No. 4. P.P. 103-115.