THE INFLUENCE OF REYNOLDS NUMBER AND A TEMPERATURE ON THE MASS TRANSFER COEFFICIENT OF THE CORRODING PIPE
محتوى المقالة الرئيسي
الملخص
Corrosion of carbon steel pipe in aerated 0.1N NaCI solution nder isothermal turbulent flow conditions (Reynolds number 15000-113000 and temperature of 30-60°C) is investigated by weight loss method. The effect of Reynolds number and temperature on corrosion rates is experimentally studied and discussed. Corrosion mechanism is analyzed as a mass transfer operation and the corrosion rate is expressed in terms of mass transfer dimensionless groups (Sh and St) and in terms of usual corrosion units. The results of corrosion rates are compared with many proposed models particularly those based on the concept of analogy among mass, heat, and momentum transport by determining experimental friction factor. The capability of these models to express corrosion rates over the investigated range of Re and temperature is examined and discussed. Many of these correlations are adopted to estimate corrosion rates for the considered system. It is found that Reynolds number increases the corrosion rate depending on temperature. Temperature increases the corrosion rate for high and moderate values of Reynolds number. At low Reynolds number the effect of temperature depends on oxygen solubility, oxygen molecular diffusivity, and Reynclds number (or eddy diffusion). Generally, Von Karman and Prandtl-Taylor analogies (based on the experimental friction factor) show good agreement with experimental mass transfer results while Chilton-Colburn analogy exhibits reasonable agreement at low Reynolds number and some overestimation at high Reynolds number
تفاصيل المقالة
كيفية الاقتباس
تواريخ المنشور
المراجع
Allen R.W and E. R. G. (1969), Echert, J. Heat Transfer, Augast, P.301, Apsley D., (2002), Turbulent Boundary Layers,.
Atia M.A., Ph.D. (1996), Thesis, Dept. Chem. Eng., Baghdad University, Baghdad,. Audin A. and L. John, J. (1972), Chem. Eng. Data, Vol.17, No.3, P.789,.
Bennett C.O. and J. E. Myers, (1982), Momentum, Heat and Mass Transfer, 3 Edition, Mc Graw Hill, United States,.
Berger F.B. and K. F. Hau, Int. J.(1977), heat Mass Trans, Vol.20, P. 1185,
Chilton T.H. and A.P. (1934), Colburn, Ind. Eng. Chem., Vol. 26, No.11, P. 1183,
Ozisk M. N., (1988), Heat Transfer, 3 Edition, McGraw Hill, New Yorka el enauloe sont
Perry R.H. and C.H. Chilton, (1980), Chem Eng. Hand-Book, 6t Ed., Mc Graw Hill, 1998. Mahato B. K., C. Y. Cha, and W. Shemlit, Corros. Sei., Vol. 20, P. 421,
Petukhov RS., (1970), Heat Transfer and Friction in Turbulent Pipe Flow with Variable Physical Properties, Advances in Heat Trans., Vol. 6, P. 503,.
Pickett D.J. and K. L. Ong. (1974), Electchmica Acta, Vol. 19, P.875..
Prandtl L. (1921), 1925:Z. angew, Mech., 1:431
Reynolds O., (1874), Process Manchester Lit. Phil Soc.14:7,
Sandall O.C., O. T. Hanna, and P. R. Mazet, (1980), The Canadian J. Chem. Eng., Vol. 58, P. 443
Shreir L. L., (1994), Corrosion Handbook, 3 Edition., Part 1, Newnes-Butter., London,
Slaiman Q.J. and B. O. Hassan, (2004), Unpublished Data.
Von Karman, (1939), Trans. ASME, Vol. 61, P. 5,
Deissler R.G., (1952), NACA, Report
Drew T.B., E .C. Koo, and W. H. (1932), McAdams, Trans. AICHE, Vol. 28, P. 56, Gay B., N. V. Mackley and J. D. Jenkins,, Int. J. (1976), Heat Mass Transfer, Vol. 19, P. 995,
Hubbard D. W. and E. N. (1966), Lightfoot, Ind, Eng. Chem., Vol.5, P.370.. Knudsen J. G. and D. L. Katz, (1958), Fluid Dynamics and Heat Transfer, Mc Graw Hill, New York
Marangozis J., (1968), Corrosion, Vol.24, No. 8, P. 255..
Mizushina T., T. Matsumoto, and S. Yoneda,, (1977), Heat and Mass Transfer Source Book, Mizushina, (1971), The Electrochemical Method in Transport Phenomena, Advances in Heat Transfer. Vol. 7, P. 87.
Nikurdse J.. (1932). VDI- Forschungsheft, 356,