Experimental and Numerical Study on Cavitation Effects in Centrifugal Pumps
Main Article Content
Abstract
Experimental and numerical investigations of the centrifugal pump performance at non-cavitating and cavitating flow conditions were carried out in the present study. Experiments were performed by applying a vacuum to a closed-loop system to investigate the effects of the net positive suction head available (NPSHa), flow rate, water temperature and pump speed on the centrifugal pump performance. Accordingly, many of the important parameters concerning cavitation phenomenon were calculated. Also, the noise which is accompanied by cavitation was measured. Numerical analysis was implemented for two phase flow (the water and its vapor) using a 2-D simulation by ANSYS FLUENT software to investigate the internal flow of centrifugal pump under cavitating conditions. It was observed that with decreasing NPSHa, the values of the pump head, flow rate and efficiency initially remain constant, but with further reduction in NPSHa these parameters will decrease. Also, it was found that at 3% head drop the percentage drop of the flow rate is less than 2% whereas the percentage drop of the efficiency is greater than 3%. Numerically, it was noticed that the cavitation regions appear at the leading edge of suction side of the impeller blades which represents the lowest pressure area inside the computational domain of the centrifugal pump.
Article Details
How to Cite
Publication Dates
References
Brennen, C.E., 1994, "Hydrodynamics of Pumps", Concepts NREC and Oxford University Press.
Cernetic, J., Prezelj, J., and Cudina, M., 2008, "Use of Noise and Vibration Signal for Detection and Monitoring of Cavitation in Kinetic Pumps", University of Ljubljana, Faculty of Mechanical Engineering, Slovenia, pp. 2199-2204, June 29-July 4.
Girdhar, P., and Moniz, O., 2005, First Edition, "Practical Centrifugal Pumps", IDC Technologies, Netherlands.
Harihara, P.P., and Parlos, A.G., 2006, "Sensorless Detection of Cavitation in Centrifugal Pumps", ASME International Mechanical Engineering Congress and Exposition, November 5-10, Chicago, USA.
Houlin, L., Yong, W., Shouqi, Y., Minggao, T., and Kai, W., 2010, "Effects of Blade Number on Characteristics of Centrifugal Pumps", Chinese Journal of Mechanical Engineering, Vol. 23, pp. 1-6.
"Kubota Pump Hand Book", 1972, First Edition, Volume 1, Kubota Ltd. Pump Export Department.
Sanks, R.L., Tchobanoglous, G., Bosserman, B.E., and Jones, G.M., 1998, Second Edition, "Pumping Station Design", Butterworth-Heinemann, USA.
Schiavello, B., and Visser, F.C., 2008, "Pump Cavitation-Various NPSHR Criteria, NPSHA Margins and Impeller Life Expectancy", Twenty Fourth International Pump Users Symposium. Sloteman, D.P., 2007, "Cavitation in High Energy Pumps-Detection and Assessment of Damage Potential", Twenty-Third International Pump Users Symposium, pp. 29-38.
Stuparu, A., Susan-Resiga, R., Anton, L.E., and Muntean, S., 2011, "A New Approach in Numerical Assessment of the Cavitation Behavior of Centrifugal Pumps", International Journal of Fluid Machinery and Systems, Vol. 4, No.1, pp. 104-113, January-March.
White, F.M., 1998, Fourth Edition, "Fluid Mechanics", McGraw-Hill Series.