COMBINED CONVECTION HEAT TRANSFER TO THERMALLY DEVELOPING FLOW IN HORIZONTAL CIRCULAR CYLINDER
Main Article Content
Abstract
Experiments were conducted to study the local and average heat transfer by mixed convection for hydrodynamically fully developed but thermally developing laminar air flow in horizontal circular cylinder. The experimental setup using an aluminum cylinder as test section with 30 mm inside diameter and 900 mm heated length (L/D=30), is subjected to a constant wall heat flux boundary condition. The investigation covers Reynolds number range from (400 to 1600), heat flux varied from (60W/m² to 400W/m²)and by using an aluminum entrance section pipes (calming sections) having the same inside diameter as test section pipe but with variable lengths as entrance sections. The entrance sections included a long calming section of length 240 cm (L/D=80) and two short calming sections with lengths 60 cm (L/D=20), 120 cm (L/D=40). The results present the temperature variation along the cylinder surface and the local and average Nusselt number variation with the dimensionless axial distance (Z). For all entrance sections, the results show an increase in the Nusselt number values as the heat flux increases. Also, the mixed convection regime can be bounded by a suitable selection of (Re) number ranges and the heat flux ranges. The obtained Richardson numbers (Ri) range varied approximately from (0.1171 to 12.54).
Article Details
Section
How to Cite
References
Bergles, A.E. and Simonds, R.R., (1971), Combined forced and free convection for laminar flow in a horizontal tube with S uniform heat flux, Int. J. Heat Mass Transfer, Vol.14, pp.1989-2000.
Depew, C.A. and August, S.E., (1971), Heat transfer due to combined free and forced convection in a horizontal and isothermal tube, J.of Heat Transfer, ASME Trans., Vol. 93, Nov., pp.380-384.
Hong. S.W., Morcos. S.M. and Bergles, A.E., (1974), Analytical and experimental results for combined forced and free laminar convection in horizontal tubes, Int. Heat Transfer Conference 5th, Vol. 3, pap.No. NC4.6, pp. 154-158, Tokyo
Lichtarowicz, A., (1971), Combined free and forced convection effects in fully developed laminar flow in horizontal tubes, Symposium on Heat and Mass Transfer by combined free and miner convection (Int. Mech. Engrs.), pap. No. C114, (15 Sept.).
Burmeister., (1993), Convective Heat Transfer, John wiley&sons, Inc., 2nd edition.
McComas, S.T. and Eckert, E.R.G., (1966), Combined free and forced convection in a horizontal circular tube, J.of Heat Transfer, ASME Trans., Vol.88, May, pp. 147-153.0
Louis C. Metais, B. and Eckert, E.R.G., (1964), Forced, mixed and free convection regimes , J. of Heat Transfer, ASME Trans., Vol. 86, May, pp. 295-296.
Morcos, S.M. and Bergles, A.E., (1975), Experimental investigation of combined forced and free convection in horizontal tubes, J. of Heat Transfer, ASME Trans., Vol. 97, May, pp.212-219.
Mori, y., Futagami, k., Tokuda, S. and Nakumara, M., (1966), Forced convection heat transfer in uniformly heated horizontal tube - experimental study on the effect of buoyancy, Int. J.Heat Mass Transfer, Vol. 9, pp. 453-463.
Mori, Y. and Futagami, K., (1967), Forced convection heat transfer in uniformly heated horizontal tubes (2nd report theoretical study), Int. J. Heat Mass Transfer, Vol.10, pp.1801-1813.
Roshenow, W.M; Hartnett and Ganic., (1985), Hand Book of Heat Transfer Fundamentals', McGraw-Hill, 2nd edition.
Shah, R.K.and London, A.L, (1978), Laminar flow forced convection in ducts, Advances in Heat Transfer, supplement 1, Academic press.
Shannon, R.L. and Depew, C.A., (1968), Combined free and forced laminar convection in a horizontal tube with uniform heat flux, J. of Heat Transfer, ASME Trans., Vol. 90, Aug. pp. 353- 357.
Yousef, W.W. and Tarasuk, J.D., (1982), Free convection effects on laminar forced convective heat transfer in a horizontal isothermal tube, J.of Heat Transfer, ASME Trans., Vol. 104, Feb., pp. 145- 152.