Study the Impact Behavior of the Prosthetic Lower Limb Lamination Materials Due to Low Velocity Impactor
Main Article Content
Abstract
This work involves three parts , first part is manufacturing different types of laminated below knee prosthetic socket materials with different classical laminated materials used in Baghdad center for prosthetic and orthotic (4perlon layers+2carbon fiber layer+4 perlon layers) , two suggested laminated materials(3perlon layers+2carbon fiber layer+3 perlon layers) and (3perlon layers+1carbon fiber layer+3 perlon layers) ) in order to choose perfect laminated socket . The second part tests (Impact test) the laminated materials specimens used in socket manufacturing in order to get the impact properties for each socket materials groups using an experimental rig designed especially for this purpose. The interface pressure between the residual leg and prosthetic socket is also measured to cover all the surface area of the B-K prosthetic socket by using piezoelectric sensor in order to estimate the resulting stress according to loading conditions. A male with age, length, mass, and stump length of 42 years, 164 cm, 67 Kg and 13 cm respectively with a right transtibial amputation is chosen to achieve the above mentioned test procedures. The last part suggests a theoretical and analytical models for each group of specimen to find out the absorbed energy behavior and subjected maximum stress for each laminated B-K prosthetic socket materials .
Article Details
Section
How to Cite
References
Goldberg,J. E., Philip, S.R. and Eileen,G. F. ,2008, "The Effects of Direct Measurement Versus Cadaver Estimates of Anthropometry in the Calculation of Joint Moments during Above –Knee Prosthetic Gait in Pediatrics", Journal of Biomechanics ,Vol.41,No.3. pp. 695-700
Jason,W.J., 2005,"Preliminary Design Approach for Prosthetic Anke Joints using Compliant Mechanisms ", Msc. Thesis ,mechanical engineering department ,Brigham young University
H. Goujon,2006 "Analyse De La Marche del'Amputee Femoral", PhD. Thesis,biomechanical engineering department , Unversity of Ensam ..
Kumar, R.,T.,2005, "Task Oriented Stable Gait Synthesis in Biped Locomotion ", Msc. thesis submitted to Indian institute of information technology .
Christopher, L.,V., Briant D.,S., and Jeremy C., C., 1999,"Dynamics of Human Gait", Second edition , Kibiho publisher Cape town, South Africa.
Hoppmann, W.,H., 1961,"Shock and Vibration Handbook",. McGraw-Hill Book Co., New York.
Tuttle, M.,E., 2004,” Structural Analysis of Polymeric Composite Materials”, Marcel Dekker Book, Inc
Jacob L.,R.,2008," Plasticity Theory", Dover Publications, University of California at Berkeley
Roger M., C., and Thomas ,D., J., January 1989 " Instrumented Impact Testing of Composite Materials", Approved for public release; distribution unlimited, Bethesda, Maryland,Ship Materials Engineering Department .
Chocron, L,.S., Benloulo,R.,T., and etl, 1 997," A Simple Analytical Model for Ballistic Impact
in Composites", Journal Dephysiqueiv, France .
Serge, A.,T., 2007," Ballistic Impact on Composites ", 16T h International conference on composite Materials, Kyoto, Japan .
Mohd, A., S., 2008, " The Study of Impact Response of Composite Materials ", Report submitted to Faculty of Mechanical Engineering, University Malaysia Pahang.
Alastair ,F., J., 2008, " Impact and Crash Modeling of Composites Structure " , German Aerospace Center (DLR) ,Institute of Structures and Design, Stuttgart, Germany
Thibaut, D.,R., 2010 " Wave Propagation and Dynamic Fracture in Laser Shock-Loaded Solid Materials", Edited by Andrey Petrin, CNRS,ENSMA,ParisTech,France.
Resan, K.,K., 2007 "Analysis and Design Optimization of Prosthetic BK", Ph.D. thesis ,university of technology ,Baghdad,.
Jumaa ,S., C., 2009 " Design and Optimization of the Above Knee Prosthetic Socket", PhD Thesis ,University of Technology ,Baghdad.
Nasserو N. J.و 2011"Study of the Effect of Impact on Curved Composite Plates",Msc. Thesis ,Mech.Eng. Departments, Al-Mustansiriya Unversity,