Effect of Cryogenic Treatment on the Properties of Low Carbon A858 Steel
Main Article Content
Abstract
This study is concerned with the effect of Deep Cryogenic Treatment (DCT) at liquid nitrogen temperature (-196 o C) on the mechanical properties and performance of low carbon steel (A858). The tests specimens were divided in to two groups, the first group was subjected to the conventional heat treatment of normalizing, and the second group was also normalized then subjected to (DCT). The results have shown that after (DCT), the Hardness, Tensile properties and the impact energy absorbed were all slightly increased. However the fatigue test showed some positive improvement in fatigue limit by 20(N/mm2 ), and the volume wear rates at different loads were significantly decreased after (DCT). The changes in microstructure due to (DCT) were clearly noticeable, the grain boundaries were no longer visible, and the Pearlite isles globalization was obvious.
Article Details
Section
How to Cite
References
Bensely, A. Prabhakaran, A. Mohan Lal and D. Nagarajan ,"Enhancing the wear resistance of case carburized steel En 353 by cryogenic treatment", Cryogenics 45 pp:747-754 , (2006).
Franjo Cajner, Vojteh Leskovšek, Darko Landek, and Hrvoje Cajner, "Effect of Deep-Cryogenic Treatment on High Speed Steel Properties", Materials and Manufacturing Processes, 24, pp: 743–746, (2009).
G.Z. Ma, D. Chen, Y. Jiang and W. Li, "Cryogenic treatment-induced martensitic transformation in Cu-Zr-Al bulk metallic glass composite ", Intermetallics 18, pp: 1254-1257, (2010).
Johan Singh, P. Guha, B. Achar, D.R.G.," Fatigue life improvement of AISI 304L cruciform welded joints by cryogenic treatment", Engineering Failure Analysis10, pp:1-10 (2003).
Liu, H. Wang, J. Shen, B. Yang, H. Gao and S. Huang, S.,"Effects of deep cryogenic treatment on property of 3Cr13Mo1V1.5 high chromium cast iron", Materials and Design 28, pp: 1059–1064, (2007).
Meng F. and Tagashira K., "Wear resistance and microstructure of cryogenic treated Fe–1.4Cr–1C bearing steel", Hideaki Sohma, ISIJ Int., (1994).
Mohan Lal, D.Renganarayanan, S. Kalanidhi, A. "Cryogenic treatment to augment wear resistance of tool and die steels", Cryogenics 41, pp: 149-155 (2001).