Batch and Fixed-Bed Modeling of Adsorption Reactive Remazol Yellow Dye onto Granular Activated Carbon
Main Article Content
Abstract
In this work, the adsorption of reactive yellow dye (Remazol yellow FG dye) by granular activated carbon (GAC) was investigated using batch and continuous process. The batch process involved determination the equilibrium isotherm curve either favorable or unfavorable by estimation relation between adsorption capacity and concentration of dye at different dosage of activated carbon. The results were fitted with equilibrium isotherm models Langmuir and Freundlich models with R2value (>0.97). Batch Kinetic study showed good fitting with pseudo second order model with R2 (0.987) at contact time 5 h. which provesthat the adsorption is chemisorptions nature. Continuous study was done by fixed bed column where breakthrough time was increased at flow rates
(21.67, 12.5 and 6 ml/min) and initial dye concentration (80, 40, 20 and 10 mg/l) were decreased and bed depth was increased (5, 10, 15 and 20 cm). The adsorption data were fitted to the fixed-bed adsorption mathematical models Thomas and Yoon- Nelson models. The results fitted well to the Thomas and Yoon-Nelson models with correlation coefficient, R2≥ 0.944. Average relative error ARE% was applied to examine the theoretical and experimental results.
Article Details
Section
How to Cite
References
➢ Abood W. M., 2012, PhD. thesis, Baghdad University , College of engineering, Baghdad Iraq.
➢ Al–Degs Y. S., KhraishehM. A., Allen S.J. and Ahmed M., 2009, Adsorption characteristics of reactive dyes in column of activated carbon, J. Hazard. Mater. Vol. 165, pp. 944–949.
➢ Banat F. a, Al-Asheh S. b, Al-Ahmad R. a and Bni-Khalid F., 2007, Bench-scale and packed bed sorption of methylene blue using treated olive pomace and charcoal, l Bioresource Technology, Vol. 98, pp. 3017–3025
➢ Cavaseno, V., 1980, Industrial Waste Water and Solid Waste Engineering, Mc Craw-Hill Publication Co., New York, USA.
➢ Foo. K.Y. and Ahmed B. H , 2010, Insight into the Modeling of Adsorption Isotherm Systems, Chemical Engineering J., Vol. 156, pp.2-10.
➢ Goel, P. K., 1997, Water Pollution- causes, effects and control, New Age International Publishers, New Delhi, India.
➢ Ho, Y.S. Ng, J.C.Y. and McKay, G., 2000, Kinetics of Pollutant Sorption By Biosorbents: Review , separation and purification methods, vol.29, No.2 , pp.189– 232.
➢ Hunger, K., 2003, Industrial Dyes Chemistry, Properties, Applications , WILEY- VCH Verlag GmbH & Co. KGA, Weinheim
➢ Isa, M. H., Lang, L. S., Asaari, F., Aziz, H., Ramli, N. and Dhas, J., 2007, low Cost Removal of Disperse Dyes from Aqueous Solution Using Palm Ash , Dyes and Pigments, vol. 74, pp. 446-453.
➢ Liljana Markovska, Vera Meshko and Vladimir N., 2001, Adsorption of Basic Dyes in a Fixed Bed Column, Korean J. Chem. Eng., Vol. 18, No. 2, pp. 190-195 .
➢ Mohammad H. S., Mahmoud V. and Mohammad H. E., 2013, A comparative study of copper (ii) removal on iron oxide, aluminum oxide and activated carbon by continuous down flow method, Journal of Toxicology and Environmental Health Sciences, Vol. 5, No. 8, pp. 150-155.
➢ Nemerow N. L., 1971, IndustrialWater Pollution-Origins, Characteristics and Treatment, Addison-Wesley publishing company, Canada.
➢ Nwabanne, J. T., Igbokwe and P. K., 2012, Adsorption Performance of Packed Bed Column for the removal of Lead (ii) using oil Palm Fibre International, Journal of Applied Science and Technology Vol. 2, No. 5, pp106-117
➢ Ong S., Lee W., Keng P. and Ha S. T., 2010, Equilibrium studies and kinetics mechanism for the removal of basic and reactive dyes in both single and binary systems using EDTA modified rice husk, International, J. Phys. Sci. Vol. 5, pp. 582–595.
➢ Peavy, H. S., Rowe, D. R., and Techobanoglous, G., 1986, Environmental Engineering, McGraw-Hill book company, New York, USA.
➢ Sachin M., Kanawade, Gaikwad, R.W. and Misal, S. A., 2010, Low cost Sugarcane Bagasse Ash as an Adsorbent for Dye Removal from Dye Effluent, International Journal of Chemical Engineering and Applications, Vol. 1, No. 4, December 2010, ISSN: 2010-0221
➢ Sotelo, J. L., Rodríguez, A., Álvarez, S. and García, J., 2012, Modeling and Elimination of Atenolol on Granular Activated Carbon in Fixed Bed Column, International Journal of Environmental Research, Vol6, No. 4 pp.961-968,.
➢ Sulyamon A. H. and Abood W. M. , 2013, Competitive Adsorption of Three Reactive Dyes by Activated Carbon , Journal of Engineering, Vol. 19, No. 6, pp. 655-670.
➢ Sulyamon A. H. and Abood W. M., 2013, Removal of reactive yellow dye by adsorption onto activated carbon using simulated wastewater , Journal of desalination and waste water treatment , Published online: 05 Jun 2013, pp.1-11.
➢ Tchohanoglous, G., Burton F. L. and Stensel, D., 2003, Waste Water Engineering- Treatment and reuse, Mc-Craw-Hill Co., 4th edition, Hong Kong, China.
➢ Thomas, W. J. and Crittenden, B., 1998, Adsorption technology and Design, Butterworth Heinemann, Oxford, UK.
➢ Trgo, M., Medvidovic, N. and Peric, J., 2011, Application of Mathematical empirical Models to Dynamic Removal of Lead 0n Natural Zeolite in Fixed Bed, Indian Journal of Chemical Technology, March, vol. 18, pp. 123-131.
➢ -ahaya, N. K., Latiff, M. F., Bello, O. S. and Ahmed, M., 2011, Fixed-Bed Column Study Cu Removal from Aqueous Solution Using Rice Husk Based Activated Carbon, International Journal of Engineering &Technology, vol. 11, No. 1, pp. 248-252.
➢ Zhe XU, Jian-guo CAI, and Bing-cai PAN, 2013, Mathematically modeling fixed- bed adsorption in aqueous systems, Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering) Vol. 14, No. 3, pp3.155-176.
➢ Zulfadhly, Z., Mashitah, M.D. and Bhatia, S., 2001, Heavy metals removal in fixed-bed column by the macro fungus ycnoporussanguineus, Environmental Pollution, Vol. 112, No. 3, pp. 463-470.