Permanent Deformation Characterization of Stone Matrix Asphalt Reinforced by Different Types of Fibers

محتوى المقالة الرئيسي

Mohammed Ismael
https://orcid.org/0000-0003-3254-0557
Mohammed Y. Fattah
Abbas F. Jasim

الملخص

This paper focused on the stone matrix asphalt (SMA) technology that was developed essentially to guard against rutting distress. For this procedure, fibers play a racy role in stabilizing and preventing the drain down problem caused by the necessity of high binder content coupled with their strengthening effect. A set of specimens with cylindrical and slab shapes were fabricated by inclusions jute, polyester, and carbon fibers. For each type, three contents of 0.25%, 0.5%, and 0.75% by weight of mixture were added by lengths of 5, 7.5, and 10 mm. The prepared mixtures were tested to gain the essential pertained parameters discriminated by the values of drain down, Marshall quotient, rut depth, and dynamic stability. It has appeared that the fibers rate of 0.5% and 7.5 mm length is much appropriate to yield the best performance of modified mixtures. At these values, carbon fibers recorded the highest increase level of rutting resistance and dynamic stability by 53% and 100%, respectively while, jute fibers exhibited the lowest improvement by only 34% and 63%, respectively; nevertheless, they produced mixtures having the lowest drain down value. Regarding the index of plastic stiffness, polyester fibers embedded mixtures occupied the first rank of increasing by 38%.

تفاصيل المقالة

كيفية الاقتباس
"Permanent Deformation Characterization of Stone Matrix Asphalt Reinforced by Different Types of Fibers" (2022) مجلة الهندسة, 28(2), ص 99–116. doi:10.31026/j.eng.2022.02.07.
القسم
Articles

كيفية الاقتباس

"Permanent Deformation Characterization of Stone Matrix Asphalt Reinforced by Different Types of Fibers" (2022) مجلة الهندسة, 28(2), ص 99–116. doi:10.31026/j.eng.2022.02.07.

تواريخ المنشور

المراجع

• AASHTO, 2008. Standard specification for stone matrix asphalt (SMA).

• Abtahi, S.M., Sheikhzadeh, M. and Hejazi, S.M., 2010. Fiber-reinforced asphalt-concrete–a review. Construction and Building Materials, 24(6), pp.871–877.

• Abu Abdo, A.M. and Khater, M.E., 2018. Enhancing rutting resistance of asphalt binder by adding plastic waste. Cogent Engineering, [online] 5(1), pp.1–7. Available at: <http://doi.org/10.1080/23311916.2018.1452472>.

• ASTM D 6390, 2017. Standard Method of Test For Determination of Draindown Characteristics In Un-compacted Asphalt Mixtures. ASTM International, West Conshohocken, PA.

• Awanti, S.S., Habbal, A., Hiremath, P.N., Tadibidi, S. and Hallale, S.N., 2012. Characterization of stone matrix asphalt with cellulose and coconut fiber. In: Advances in Civil Engineering and Building Materials - Selected Peer Reviewed Papers from 2012 2nd International Conference on Civil Engineering and Building Materials, CEBM 2012. pp.639–642.

• Bernard, B., 2017. A Review on Various Issues Related to Stone Matrix Asphalt. Int. J. Pavement Res. Technol., 4(12), pp.588–591.

• Chen, H. and Xu, Q., 2010. Experimental study of fibers in stabilizing and reinforcing asphalt binder. Fuel, 89(7), pp.1616–1622.

• Chilukwa, N. and Lungu, R., 2019. Determination of Layers Responsible for Rutting Failure in a Pavement Structure. Infrastructures, 4(2), p.29.

• Chin, C. and Charoentham, N., 2021. Laboratory investigation of stone mastic asphalt mixtures containing coconut fiber. Engineering and Applied Science Research, 48(2), pp.131–136.

• Chowdhury, A., Button, J.W. and Bhasin, A., 2006. Fibers from recycled tire as reinforcement in hot mix asphalt.

• Drüschner, L. and Schäfer, V., 2000. Stone Mastic Asphalt.

• Gani, M.N. and Ali, M.S., 2018. Md. Mahbubul Islam. Nutritional Requirements of Newly Released Tossa Jute MG-1. American Journal of Food, Nutrition and Health, 3(2), pp.31–34.

• Gite, B.E. and Margaj, M.S.R., 2013. Carbon fibre as a recent material use in construction. Civil Engineering Portal. Retrieved from http://www. engineeringcivil. com/carbon-fibre-as-arecent-material-use-in-construction. html.

• Hamedi, G.H., Sakanlou, F., Omari, B. and Azarhoosh, A., 2021. Laboratory Investigation of the Effect of Ceramic Fiber on Stone Matrix Asphalt Rutting Performance. Journal of Materials in Civil Engineering, 33(1), p.4020431.

• Huang, Y., Liu, Z., Liu, L., Zhang, Y. and Xu, Q., 2020. Hybrid Modification of Stone Mastic Asphalt with Cellulose and Basalt Fiber. Advances in Materials Science and Engineering, 2020.

• Islam, M.M. and Ali, M.S., 2018. Industrial Research Advances of Jute in Bangladesh. International Journal of Agricultural and Biosystems Engineering, 3(1), pp.1–9.

• Ismael, M.Q. and and Al-Taher, H.M., 2015. Reinforcement of Asphalt Concrete by Polyester Fibers to Improve Flexural Bending Fatigue Resistance. Journal of Engineering/UoBaghdad, 21(1), pp.115–130.

• Ismael, M.Q., Fattah, M.Y. and Jasim, A.F., 2021. Improving the rutting resistance of asphalt pavement modified with the carbon nanotubes additive. Ain Shams Engineering Journal, [online] 12(4), pp.3619–3627. Available at: <https://doi.org/10.1016/j.asej.2021.02.038>.

• Kaloush, K.E., Biligiri, K.P., Zeiada, W.A., Rodezno, M.C. and Reed, J.X., 2010. Evaluation of fiber-reinforced asphalt mixtures using advanced material characterization tests. Journal of Testing and Evaluation, 38(4), pp.400–411.

• Kareem, Q.S., Ahmed, A.I. and Asmael, N.M., 2010. Effect of Additives Types and Contents on the Properties of Stone Matrix Asphalt Mixtures. Engineering and Technology Journal, 28(21), pp.6414–6426.

• Karunakar, K., Sravana, P., Goud, K.G. and Sowjanya, T., 2018. Properties of Stone Matrix Asphalt Using Carbon Fiber and Glass Fiber. International Journal of Engineering Sciences Invention (IJESI), 7(6), pp.45–52.

• Kumar, G.S. and Shankar, A.U.R., 2019. Evaluation of Workability and Mechanical Properties of Stone Matrix Asphalt Mixtures Made With and Without Stabilizing Additives. Transportation Infrastructure Geotechnology, pp.1–14.

• Kumar, N.L.N.K. and Ravitheja, A., 2019. Characteristics of stone matrix asphalt by using natural fibers as additives. Materials Today: Proceedings, 19, pp.397–402.

• Kumar, P., Chandra, S. and Bose, S., 2007. Laboratory investigations on SMA mixes with different additives. International Journal of Pavement Engineering, 8(1), pp.11–18.

• Kumar, P., Sikdar, P.K., Bose, S. and Chandra, S., 2004. Use of jute fibre in stone matrix asphalt. Road materials and pavement design, 5(2), pp.239–249.

• Lavasani, M., Latifi Namin, M. and Fartash, H., 2015. Experimental investigation on mineral and organic fibers effect on resilient modulus and dynamic creep of stone matrix asphalt and continuous graded mixtures in three temperature levels. Construction and Building Materials, [online] 95, pp.232–242. Available at: <http://dx.doi.org/10.1016/j.conbuildmat.2015.07.146>.

• Liu, X. and Wu, S., 2011. Study on the graphite and carbon fiber modified asphalt concrete. Construction and Building Materials, 25(4), pp.1807–1811.

• Mahrez, A. and Karim, M.R., 2007. Rutting characteristics of bituminous mixes reinforced with glass fiber. In: Proceedings of the Eastern Asia Society for Transportation Studies Vol. 6 (The 7th International Conference of Eastern Asia Society for Transportation Studies, 2007). Eastern Asia Society for Transportation Studies.p.282.

• Mawat, H.Q. and Ismael, M.Q., 2020. Assessment of moisture susceptibility for asphalt mixtures modified by carbon fibers. Civil Engineering Journal (Iran), 6(2), pp.304–317.

• McDaniel, R., 2015. NCHRP SYNTHESIS 475 Fiber Additives in Asphalt Mixtures.

• Mohajerani, A., Hui, S.Q., Mirzababaei, M., Arulrajah, A., Horpibulsuk, S., Kadir, A.A., Rahman, M.T. and Maghool, F., 2019. Amazing types, properties, and applications of fibres in construction materials. Materials, 12(16), pp.1–45.

• Putman, B.J. and Amirkhanian, S.N., 2004. Utilization of waste fibers in stone matrix asphalt mixtures. Resources, conservation and recycling, 42(3), pp.265–274.

• Raghuram, K.B. and Chowdary, V., 2013. Performance evaluation of stone matrix asphalt (SMA) using low cost fibres. In: JourNal of The INdIaN roads CoNgress Volume 74-2. p.159.

• Saleem, A.A. and Ismael, M.Q., 2020. Assessment Resistance Potential to Moisture Damage and Rutting for HMA Mixtures Reinforced by Steel Fibers. Civil Engineering Journal, 6(9), pp.1726–1738.

• Sheng, Y., Li, H., Guo, P., Zhao, G., Chen, H. and Xiong, R., 2017. Effect of fibers on mixture design of stone matrix asphalt. Applied Sciences, 7(3), p.297.

• Slebi-Acevedo, C.J., Lastra-González, P., Pascual-Muñoz, P. and Castro-Fresno, D., 2019. Mechanical performance of fibers in hot mix asphalt: A review. Construction and Building Materials, [online] 200, pp.756–769. Available at: <https://doi.org/10.1016/j.conbuildmat.2018.12.171>.

• The State Coporation for Roads and Bridges, 2003. Standard Specifications for Roads and Bridges, Section R/9:Hot-Mix Asphalt Concrete Pavement. Baghdad, Iraq.

• Wu, M.-M., Li, R., Zhang, Y.-Z., Fan, L., Lv, Y.-C. and Wei, J.-M., 2015. Stabilizing and reinforcing effects of different fibers on asphalt mortar performance. Petroleum Science, 12(1), pp.189–196.

• Yang, J., Shi, X., Wan, J., Qian, G., Pan, W. and Yang, Y., 2006. Evaluation of rutting resistance of double-layered asphalt mixes. Road materials and pavement design, 7(4), pp.533–542.

الأعمال الأكثر قراءة لنفس المؤلف/المؤلفين