The Effect of Rubber Crumbs on Marshall Properties for Warm Mix Asphalt
محتوى المقالة الرئيسي
الملخص
A new pavement technology has been developed in Highway engineering: asphalt pavement production is less susceptible to oxidation and the consequent damages. The warm mix asphalt (WMA) is produced at a temperature of about (10-40) oC lower than the hot asphalt paving. This is done using one of the methods of producing a WMA. Although WMA's performance is rather good, according to previous studies, as it is less susceptible to oxidation, it is possible to modify some of its properties using different materials, including polymers. Waste tires of vehicles are one of the types of polymers because of their flexible properties. The production of HMA, WMA, and WMA modified with proportions of (1, 1.5, and 2%) of rubber crumbs by the dry method are accomplished in this work. Marshall Test and volumetric properties determination are performed to evaluate its performance. The results showed that using 1% of rubber crumbs as a replacement for fine aggregate in the warm asphalt mixture produced the best properties of the WMA compared to the conventional WMA.
تفاصيل المقالة
كيفية الاقتباس
تواريخ المنشور
المراجع
Abdul Hassan, N., Aireyb, G.D., Jayaa, R.P., Mashrosa, N., and Aziz, M.M.A., 2014. A Review of Crumb Rubber Modification in Dry Mixed Rubberised. Jurnal Teknologi, 70(4), pp.127–134. doi:10.11113/jt.v70.3501
Abdullah, M.E., Zamhari, K.A., Buhari, R., Bakar, S.K.A., Kamaruddin, N.H.M., Nayan, N., Hainin, M.R., Hassan, N.A., Hassan, S.A., and Yusoff, N.I.M., 2014. Warm mix asphalt technology: a review. Jurnal Teknologi, 71(3), pp. 39-52. doi:10.11113/jt.v71.3757
Albayati, A.H., 2018. Performance evaluation of plant produced warm mix asphalt. Journal of Engineering, 24(5), pp.145-164. doi:10.31026/j.eng.2018.05.10
Albayati, A.H., and Abduljabbar, M.H., 2019. The simulation of short-term aging based on the moisture susceptibility of asphalt concrete mixtures. Results in Engineering, 2, P.100012. doi:10.1016/j.rineng.2019.100012
Al Qadi, A.N., Alhasanat, M.B., and Haddad, M., 2016. Effect of crumb rubber as coarse and fine aggregates on the properties of asphalt concrete. American Journal of Engineering and Applied Sciences, 9(3), pp. 558-564. doi:10.3844/ajeassp.2016.558.564
American Society for Testing and Materials, 2013. ASTM C127-15: Standard Test Method for Density, Relative Density ( Specific Gravity ), and Absorption of Coarse Aggregate. ASTM Standard Book (C): 1–6.
ASTM. D4402. Standard Test Method for Viscosity Determinations of Unfilled Asphalts Using The. Engineering 05(April 1987): 2–3
ASTM. D5. Standard Test Method for Penetration of Bituminous Materials 1. i: 4–7.
ASTM. C88. Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate 4 . Significance and Use Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate 6. Special Solutions Required.
ASTM. 1999. ASTM D113-99 - Ductility of Bituminous Materials. American Association State Highway and Transportation Officials Standard, 113(5), pp. 1–3.
ASTM C131/131M. ,2014. Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine. ASTM International, 04, pp. 4–7.
ASTM D 6926-10. ,2010. Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus. ASTM International, West Conshohocken, PA, 1–6.
ASTM D 70., 2014. Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer). Annual Book of ASTM Standards 04, pp. 1–4.
ASTM D92., 2005. Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester. Annual Book of ASTM Standards I (May 1964), pp. 3–7. http://www.shxf17.com/pdf/ASTMD92-05.pdf.
Bueno, M., Luong, J., Terán, F., Viñuela, U., Vázquez, V.F., and Paje, S.E., 2014. Noise reduction properties of an experimental bituminous slurry with crumb rubber incorporated by the dry process. Coatings, 4(3), pp. 602-613. doi:10.3390/coatings4030602
Colinas-Armijo, N., Bressi, S., Gabet, T., and Losa, M., 2018. Effect of crumb rubber in dry process on mix design of asphalt mixtures. The International Society for Asphalt Pavements (ISAP) conference, Fortaleza, Brazil 2018.
Ismael, M.Q., and Ahmed, A.H., 2019. Effect of hydrated lime on moisture susceptibility of asphalt mixtures. Journal of Engineering, 25(3), pp. 89-101. doi:10.31026/j.eng.2019.03.08
Gibreil, H.A., and Feng, C.P., 2017. Effects of high-density polyethylene and crumb rubber powder as modifiers on properties of hot mix asphalt. Construction and building materials, 142, pp. 101-108. doi:10.1016/j.conbuildmat.2017.03.062
Lushinga, N., Cao, L., Dong, Z., Yang, C., and Assogba, C.O., 2020. Performance evaluation of crumb rubber asphalt modified with silicone-based warm Mix additives. Advances in Civil Engineering, 2020, pp. 1-17. doi:10.1155/2020/4840825
Nikolaides, A., 2015. Engineering Highway: Pavements,Materials and Control of Quality, CRC Press, 143: 203–8.
Rondón-Quintana, H.A., Fernández-Gómez, W.D., and Zafra-Mejía, C.A., 2016. Behavior of a warm mix asphalt using a chemical additive to foam the asphalt binder. Revista Facultad de Ingeniería Universidad de Antioquia, (78), pp. 129-138. doi:10.17533/udea.redin.n78a17
SCRB/R9, 2003. General Specification for Roads and Bridges, Section R/9, Hot-Mix Asphalt Concrete Pavement. Revised Edition. State Corporation of Roads and Bridges, Ministry of Housing and Construction, Republic of Iraq.
Statements, Bias., 2006. Astm D 36. Standard Test Method for Softening Point of Bitumen. ASTM International, West Conshohocken, PA, USA. 1(d): 3–6.
Zhu, J., Birgisson, B., and Kringos, N., 2014. Polymer modification of bitumen: Advances and challenges. European Polymer Journal, 54, pp. 18-38. doi:10.1016/j.eurpolymj.2014.02.005