Effect of Silica Fume on Some Properties of No-Fine Concrete with Recycled Coarse Aggregate

محتوى المقالة الرئيسي

Ruaa Qassim Fawzi
Hadeel Khalid Awad

الملخص

No-fines Concrete is a lightweight porous concrete produced by omitting sand from the traditional concrete mix. It helps replenish the groundwater aquifer by directly allowing precipitation to seep into the earth thanks to its wide pores. This work studied the influence of partially replacing cement with silica fume (SF) with percentages of 5, 8, and 10% on some properties of no-fine concrete made using recycled coarse aggregate. The natural coarse aggregate (NA) was replaced with 10%, 20%, and 30% by crushed reactive powder concrete waste volume as recycled aggregate (RA). The optimum percentage was 10% RA with 10% SF, which indicated a substantial improvement in the no-fine concrete's strength, dry density, and water absorption compared to the design mix. The results exhibit increases in percentages in compressive strength, tensile strength, flexural strength, and dry density by 18%, 14%, 16%, and 1%, respectively, while exhibiting a decrease in water absorption by 5% at 28 days.

تفاصيل المقالة

كيفية الاقتباس
"Effect of Silica Fume on Some Properties of No-Fine Concrete with Recycled Coarse Aggregate" (2024) مجلة الهندسة, 30(03), ص 46–59. doi:10.31026/j.eng.2024.03.04.
القسم
Articles

كيفية الاقتباس

"Effect of Silica Fume on Some Properties of No-Fine Concrete with Recycled Coarse Aggregate" (2024) مجلة الهندسة, 30(03), ص 46–59. doi:10.31026/j.eng.2024.03.04.

تواريخ المنشور

الإستلام

2023-01-12

الموافقة

2023-05-25

النشر الالكتروني

2024-03-01

المراجع

Ahmed Memon, B., Oad, M., Ali Rahoo, I., Ahmed Dahri, S., Ahmed Chandio, S., Professor, A., Graduate Students, P., Pakistan, S., Ahmed Memon Professor, B., & Pakistan Bashir, S. (2015). Tensile Strength of No-Fines Recycled Aggregate Concrete Cylinders. In World Journal of Engineering Research and Technology www.wjert.org ISO (Vol. 9001). www.wjert.org

ASTM C1240 (2020). Standard Specification for Silica Fume Used in Cementitious Mixture, Annual Book of ASTM Standards.

ASTM C642 (2021). Standard Test Method for Density, Absorption, and Voids in Hardened Cocrete, American Society for Testing and Material International.

ASTM C496/C496M (2017). Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, American Society for Testing and Material International.

ASTM C494 (2019). Standard Specification for Chemical Admixture for Concrete, Annual Book of ASTM Standards American Society for Testing and Materials.

ASTM C293/C293M (2016). Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Lading), American Society for Testing and Material International.

ASTM C192/C192M (2019). Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, American Society for Testing and Material International.

BS EN12390-3 (2019). Testing Hardened Concrete-Compressive Strength of Test Specimens, British Standard.

BS 1881-114 (1983). Testing Concrete- Methods for Determination of Density of Hardened Concrete, British Standard.

Cheng, A. (2011). Experimental Study on Properties of Pervious Concrete Made with Recycled Aggregate. International Journal of Pavement Research and Technology, 4(2), 104–110. https://doi.org/10.13189/cea.2021.090607

Farhan, O. S. (2019). Effect of Use Recycled Coarse Aggregate on the Behavior of Axially Loaded Reinforced Concrete Columns. Journal of Engineering, 25(10), 88–107. https://doi.org/10.31026/j.eng.2019.10.07

Himanshi Kashyap. (2019). Studying the Effect of Silica Fumes on Mechanical Properties of Pervious Concrete. International Journal of Engineering Research And, V8 (12). https://doi.org/10.17577/ijertv8is120341

Iraqi Specification,No.5/2019.Portland Cement, Ministry of Planning, Central Organization for Standardization and Quality Control.

Iraqi Specification, No.45/2021. Aggregate from Natural Sources for Concrete and Construction, Ministry of Planning, Central Organization for Standardization and Quality Control.

Iraqi Standard Specification, No. 1703, 2018.Water used in concrete.

Jain, A., & Pawade, N. P. Y. (2015). Characteristics of Silica Fume Concrete. International Journal of Computer Applications, February, 975–8887.

Kalpavalli, A., & Naik, S. M. (n.d.). Use of Demolished Concrete Wastes As Coarse Aggregates in High Strength Concrete Production. www.ijert.org

Rubini, K., Sampathkumar, E., C, S. D., Ramprasath, M., & Students, U. G. (2017). An Experimental Study on No Fines Concrete with Partially Replacement of Cement by Silica Fume. www.ijert.org

Salih, S. A., & Fidel, T. A. (2016). Some Durability Test of No-Fine Concrete. Journal of Engineering, 22(1), 15–30.

المؤلفات المشابهة

يمكنك أيضاً إبدأ بحثاً متقدماً عن المشابهات لهذا المؤلَّف.

الأعمال الأكثر قراءة لنفس المؤلف/المؤلفين