Load Distribution Factors For Horizontally Curved Composite Concrete-Steel Girder Bridges
محتوى المقالة الرئيسي
الملخص
This paper focuses on Load distribution factors for horizontally curved composite concrete-steel girder bridges. The finite-element analysis software“SAP2000” is used to examine the key parameters that can influence the distribution factors for horizontally curved composite steel
girders. A parametric study is conducted to study the load distribution characteristics of such bridge system due to dead loading and AASHTO truck loading using finite elements method. The key parameters considered in this study are: span-to-radius of curvature ratio, span length, number of girders, girders spacing, number of lanes, and truck loading conditions. The results have shown that the curvature is the most critical factor which plays an important role in the design of curved girders in horizontally curved composite bridges. Span length, number of girders and girder spacing generally affect the values of the moment distribution factors. Moreover, present study reveals that AASHTO Guide criterion to treat curved bridges with limited curvature as straight one is conservative. Based on the data generated from the parametric study, sets of empirical equations are developed for the moment distribution factors for straight and curved steel I-girder bridges when subjected to the AASHTO truck loading and due to dead loading.
تفاصيل المقالة
القسم
كيفية الاقتباس
المراجع
American Association for State Highway and Transportation Officials, AASHTO. 2004. AASHTO-LRFD Bridge Design Specifications. Washington, D.C.
American Association for State Highway and Transportation Officials, AASHTO. 2003. Guide Specification for Horizontally Curved Highway Bridges. Washington, D.C.
American Association of State Highway and Transportation Officials, AASHTO. 1996. Standard Specifications for Highway Bridges. Washington, D.C.
American Association for State Highway and Transportation Officials, AASHTO. 1993. Guide Specification for Horizontally Curved Highway Bridges. Washington, D.C.
Davidson, J. S., Keller, M.A. and Yoo, C.H., “Cross-frame Spacing and Parametric Effects in Horizontally Curved I-Girder Bridges”, ASCE Journal of Structural Engineering, 122(9): 1089-1096, 1996.
Qassem, Z.S. , “Load Distribution Factors for Horizontally Curved Composite ConcreteSteel Girder Bridges”, M.Sc. thesis, Civil Engineering Dept., University of Baghdad, 2004.
McManus, P.F., Nasir, G.A. and Culver, C. G., “Horizontally Curved Girders – State of the Art”, Journal of Structural Division. ASCE, 95(ST5): 853-870, 1969.
Wassef J., “Simplified Design Method of Curved Concrete slab-on-steel I-girder Bridges”, M.Sc. thesis, Civil Engineering Dept., Ryerson University, Toronto, Ont., Canada, 2004.
Zuerick, A. and Naqib, R., “Horizontally Curved Steel I-Girders State-of-the-Art Analysis Methods”, Journal of Bridge Engineering, 4 (1): 38-47, 1999.
Zureick, A., Linzell, D., Leon, R. and Burrell J., “Curved steel I-girder bridges: Experimental and analytical studies”. Engineering Structures, 22(2), Elsevier Science Ltd., 180-190, 1998.