Theoretical and Experimental Investigation of Transient Temperature Distribution in Friction Stir Welding of AA 7020-T53
محتوى المقالة الرئيسي
الملخص
Finite element modeling of transient temperature distribution is used to understand physical phenomena occurring during the dwell (penetration) phase and moving of welding tool in friction stir welding (FSW) of 5mm plate made of 7020-T53 aluminum alloy at 1400rpm and 40mm/min.
Thermocouples are used in locations near to the pin and under shoulder surface to study the welding tool penetration in the workpiece in advance and retreate sides along welding line in three positions (penetrate (start welding) , mid, pullout (end welding)).
Numerical results of ANSYS 12.0 package are compared to experimental data including axial load measurements at different tool rotational speeds (710rpm.900rpm.1120rpm and 1400rpm) Based on the experimental records of transient temperature at several specific locations of thermocouples during the friction stir welding process the temperatures are higher on the advancing side (629.2 oK) than the retreating side (605 oK) along welding line and temperature in the top of workpiece under tool shoulder is higher(645 oK) than bottom (635.79oK). The results of the simulation are in good agreement with that of experimental results. The peak temperature obtained was 70% of the melting point of parent metal.
تفاصيل المقالة
كيفية الاقتباس
تواريخ المنشور
المراجع
Zhang Z; Zhang HW (2008) “A fully Coupled Thermo-Mechanical Model Of Friction Stir Welding”. Int. J. Adv. Manuf. Technol. 37:279–293.
Cho JH, Boyce DE, Dawson PR.(2005).”Modeling Strain Hardening and Texture Evolution in Friction Stir Welding of Stainless Steel”. Mater. Sci. Eng. 398:146–163.
Nandan R. DebRoy T. Bhadeshia HKDH (2008).“Recent Advances in Friction-Atir Welding Process,Weldment Structure and Properties”. Prog. Mater.Sci. 53:980–1023.
Chao YJ. Qi X. Tang W. (2003) “Heat transfer in Friction Stir Welding Experimental and Numerical Studies”. J. Manuf. Sci. Eng. 125:138–145.
Schmidt HB. Hattel JH. (2008).” Thermal Modeling of Friction Stir Welding”. Scr. Mater. 58:332–337.
Mandal S, Williamson K (2006).” A thermo-Mechanical Hot Channel Approach For Friction Stir Welding”. J. Mater. Process. Technol. 174:190–194.
Song M. Kovacevic R. (2003).” Thermal Modelings of Friction Stir Welding in A moving Coordinate System and Its Validation”. Int. J. Mach. Tools. Manuf. 43:605–615.
Zhang HW. Zhang Z. Chen JT. (2005).” The finite Element Simulations of The friction Stir Welding Process”. Mater. Sci. Eng. 403:340–348.
Zhang Z. Zhang HW. (2007).” Material behaviors and Mechanical Features in Friction Stir Welding Process”. Int. J. Adv. Manuf. Technol. 35:86–100.
Zhang Z. Zhang HW. (2009).” Numerical studies on Controlling of Process Parameters in Friction Stir Welding”. J. Mater. Process.Technol. 209:241–270.
Nandan R. Roy GG. Debroy T. (2006).”Numerical Simulation of Three-dimensional Heat Transfer and Plastic Flow During Friction Stir Welding”. Metall. Mater. Trans. 37A:1247–1259.
Nandan R. Roy GG. Lienert TJ. Debroy T.(2006).” Numerical Modeling of 3D plastic flow and Heat Transfer During Friction Stir Welding of Stainless Steel”. Sci. Technol. Weld. Joining 11:526–537.
Chen CM. Kovacevic R. (2003).” Finite Element Modeling of Friction Stir Welding Thermal and Thermomechanical Analysis”. Int. J. Mach. Tools Manuf. 43:1319–1326.
Buffa G, Hua J, Shivpuri R, Fratini L (2006).” A Continuum Based FEM Model for Friction Stir Welding Model Development”. Mater. Sci Eng 419:389–396.
Rajesh SR. Bang HS. Chang WS. Kim HJ. Bang HS. Oh CI. Chu. JS. (2007).” Numerical Determination of Residual Stress in Friction Stir Weld Using 3D-analytical Model of Stir Zone”. J.Mater. Process. Technol. 187–188:224–226.
Peel M. Steuwer A. Preuss M. Withers. PJ. (2003) “Microstructure, Mechanical Properties and Residual Stresses as A function of Welding Speed in Aluminum AA5083 Friction Stir Welds”. Acta. Mater. 51:4791–4801.
Heurtier et al., 2006 P. Heurtier, M.J. Jones, C.Desrayaud, F. Montheillet, D. Allehaux and J. Driver, (2006) “Mechanical and thermal odeling of friction stir welding”, J. Mater. Process. Technol.
, pp. 152–158.1 18. Mohamed Assidi, Lionel Fourment, Simon Guerdoux, Tracy Nelson (2010)" Friction Model for Friction Stir Welding Process Simulation:Calibration From Welding Experiments"International Journal of Machine Tool Manufacture (50) 143-155.
Mohammad R. & Hamidreza N. (2011) “Analysis of Transient Temperature and Residual Thermal Stresses in Friction Stir Welding of Aluminum Alloy 6061-T6 Via Numerical Simulation” Int. J. Adv. Manuf. Technol. 55:143–152.
Key to steel data base version (2007.5).
"Properties and Selection: Non-Ferrous Alloys and Special Purposes Materials", ASM Handbook, American Society for Metals, Vol. 2, 1992.
Manthan Malde (2009)” Thermomechanical Modeling and Optimization of Friction Stir Welding” MS.c Thesis, Osmania University, Hyderabad, India.
ANSYS® Release 12.0 Documentation,ANSYS Inc, 2009.
Yousif, Mohanned Akab, (2006) “Investigation of Mechanical and Microstructural Characteristic of Friction Stir Welded Joints.” Ph.D. Thesis,University of Baghdad.
Muhsin Jabir Jweeg ,Sarmad Dhia Ridha (2010) "An investigation of friction stir welding and stress relief by vibration of 6061-T6 aluminum alloy"Ph.D. Thesis, University of Baghdad.
Zhu, X.K. and Chao, Y.J., (2004) “Numerical Simulation of Transient Temperature and Residual Stresses in Friction Stir Welding of 304L Stainless Steel”, Journal of Materials Processing Technology,.146(2): p. 263-272.
Hansson, Sofia, “Simulation of Stainless Steel Tube Extrusion” Luleå University of Technology,Sweden, 2006.
Dixon, John, Burkes, Douglas and Medvedev,Pavel, (2007) “Thermal Modeling of A Friction Bonding Process” Proceedings of the COMSOL Conference ,Boston,.
Seidel, T.U. and Reynolds, A.P. (2001) “Visualization of the Material Flow in AA2195 Friction-Stir Welds Using a Marker Insert Technique.” Metallurgical and Materials Transactions A, Vol. 32A, pp 2879-2884.
Nandan, R., Roy, G.G., and Debroy, T., (2006) “Numerical Simulation of Three-Dimensional Heat Transfer and Plastic Flow during Friction Stir Welding.” Metallurgical and Materials Transactions A Vol. 37A, pp 1247-1269.
A. Arora, R. Nandan, A.P. Reynolds and T. Debroy. (2009)” Torque, power requirement and stir zone geometry in friction stir welding through modeling and experiments” Scripta Materialia (60)13-16.
H. Jamshidi Aval & S. Serajzadeh & A. H. Kokabi (2011) “Theoretical and experimental investigation into friction stir welding of AA 5086 “Int. J. Adv. Manuf. Technol. 52:531–544.