Monitoring of the Vertical Settlement In Heavy Structures By Precise Levelling
محتوى المقالة الرئيسي
الملخص
Monitoring and analysing of the vertical deformations or the settlements of the structures is one of the main research fields in geodetic applications, which is considered a precise periodic measurement, made at different epochs to investigate these deformations on heavy structures.
In this research, the deformation measurements were carried out on one of Baghdad University buildings,” Building of Computers Department” of dimensions (70.0 * 81.3 m.). Due to some cracks observed in their walls, it was necessary to monitor the vertical displacement of this building at some particular monitoring points by constructing a vertical network and measured in different epochs. The first epoch (zero epoch) was carried out in April 2006, the second in July 2006, the third in October 2006 and the
last one in October 2012.
These four epochs include precise levelling measurements were adjusted by Least Squares Adjustment with the aim of investigating the settlement of this building. The two approaches “the Global Congruency test” and “the simple test” are carried out to detect if there any deformation. These two approaches were employed in the analysis and found the difference in elevations between two epochs most be ensured and found that if the monitoring points (P1 to P4) stayed really stable, when compared with the time interval or not?Then according to the analysis procedure to determine the localization of settlement at specific points in the case may change in elevation must be applied. The results showed in two different statistical techniques a significant settlement in four selected corner points on building (P1, P2, P3 and P4). The statistics are based on the probability 95% test and the congruency test with Fisher distribution table
تفاصيل المقالة
كيفية الاقتباس
تواريخ المنشور
المراجع
Baselga, S. , Garrigues, p., and Others, (2011), “Deformation Monitoring In Historic Building:A Case Study”, Survey Review, 43,323, October,
pp: (484-492).
Engineering Manual , (2002), “Structural Deformation Surveying” , Department of the US Army, Army Corps of Engineers , Washington,
DC, 20314-1000 , Manual N0 1110-2-1009 CECW-EE.
Denli, H., Hakan. and Deniz Rasim, (2003) , “Global Congruency Test method for GPS networks”, Journal of Surveying Engineering ASCE, Augest 2003, (ASCE: 0733-9453, 2003 129-3(95).
Erol, S., Erol, B. and Ayan, T., (2004) “ A General Review of The Deformation Monitoring Techniques and a case Study: Analysing Deformations Using GPs / levelling”, XXth ISPRS (International Society for Photogrammetry and Remote Sensing) – Volume XXXV Part, Conference Paper, pp: 622- 627, B7, Istanbul, Turkey
Erol, S., Çelik, R. and Ayan, T., (2004) “ Assessment of Satellite Based and Terrestrial Measurement Techniques in Monitoring Vertical Deformations”, FIG Working Week Athens, Greece, May 22-27, 2004
Fagir,Ali H. and Mudathir o. Ahmed (2007), “A procedure For Detecting Of Deformations Using Survey Control Networks” , Journal of
Science and Technology, the Sudan University of Science and Technology (SUST), 8 (1).
Gilani, ch., D., and Wolf, P.,W., (2012), "Elementary Surveying: An Introduction to Geomatics", 13th edition, Prentice Hall Edition, U.S.A.
Grunding, L., Neureither, M. and Bahndorf J. (1985), “Detection and Localization of Geometrical Movements”, ASCE, Journal of Surveying Engineering, Vol. 111, N0. 2, Aug., pp: (118-132)
Mikhail, E. M., (1976), "Observations and Least Squares", 1st edition, Donnelly publisher, New York.
Mui, A. , (2006), “Deformation Monitoring Technique Relationship between Vertical Control and Precision of Accuracy”, school of Surveying , the University of New South Wales, October.
Sansó, F. and Gil, A.J., (2006) “ Geodetic Deformation Monitoring: From Geophysical to Engineering Roles” IAG Symposium Jaén, Spain
(March 17- 19, 2005)International Association of Geodesy, volume 131, Published by Springer.
Schofield, W., and Breach M., (2007), "Engineering Surveying", 6th edition, Published by Elsever Ltd., U.K.
Teskey, W.F. , and Biacs, Z.F., (1991), “Geometrical Analysis of large Concrete roof structure”, ASCE, Journal of Surveying Engineering, Vol. 117, N0. 1, Feb., pp: (36-49).
Vladimir, S., and Miloš, J.,(2004), “Deformation Measurement on Bulk Dam of Water Work in East Slovakia”, VSB: Technical University of
Ostrava, Volume L, N0.2, p.p:1-10, ISSN 0474-8476, Slovakia