ANTISEIZURE CHARACTERISTICS OF LEADED ALUMINUM ALLOYS UNDER DRY SLIDING CONDITIONS
محتوى المقالة الرئيسي
الملخص
Aluminum-Silicon alloys, with soft lubricant metal, are considered to be one of the important tribological alloys which resist seizure. The effect of different lead percentages (1-20%Pb) that added to the modified eutectic Al-12%Si alloy on the wear rate and resistance was studied by sliding these alloys under dry sliding conditions on a carbon steel disc at different sliding distances (2.24-40.37 km). The results showed that the wear rate was decreased and wear resistance increased with increasing lead percentage of Al-12%Si alloy. Furthermore, wear rate was increased linearly with increasing sliding distance.
تفاصيل المقالة
كيفية الاقتباس
تواريخ المنشور
المراجع
An, J., Shen, X.X., Lu, Y., Liu, Y.B., Li, R.G., Chen, C.M. and Zhang, M.J., “Influence of High Current Pulsed Electron Beam Treatment on the Tribological Properties of Al-Si-Pb Alloy”, Surface and Coatings Techno., 200 (2006) 5590.
Fatahalla, N., Hafiz, M. and Abdulkhalek, M., “Effect of Microstructure on the Mechanical Properties and Fracture of Commercial Hypoeutectic Al-Si Alloy Modified with Na, Sb and Sr”, J. Mater. Sci., 34 (1999) 3555.
Hao, S.Z., An, J., Liu, Y.B. and Lu, Y., “Tribological and Structural Properties of Lubricating Films of Al-4Si-20Pb Alloy During Dry Sliding at Different Temperatures”, Mater. & Design, 26 (2005) 181.
Lee, J.A., “High-Strength Aluminum Casting Alloy for High-Temperature Applications”, NASA, Marshall Space Flight Center, Dec., 1998.
Liao, H., Sun, Y. and Sun, G., “Correlation Between Mechanical Properties and Amount of Dendritic α-Al Phase in As-Cast Near Eutectic Al-11.6%Si Alloys Modified with Strontium”, Mater. Sci. and Engg. A, 335 (2002) 62.
Mondolfo, L.F., “Aluminum Alloys: Structure and Properties”, Butterworths (London), 1976.
Norton, R.L., “Machine Design-An Integrated Approach”, Prentice-Hall Inc. (New Jersey), 1998.
Pramila Bai, B.N. and Biswas, S.K., “Subsurface Deformation in Dry Sliding of Hypo-Eutectic AlSi Alloys”, J. Mater. Sci., 19 (1984) 3588.
Rudrakshi, G.B., Srivastava, V.C., Pathak, J.P. and Ojha, S.N., “Spray Forming of Al-Si-Pb alloys and Their Wear Characteristics”, Mater. Sci. and Engg. A, 383 (2004) 30.
Sarkar, A.D., “Friction and Wear”, Academic Press (London), 1980.
Subramanian, C., “Wear of Al-12.3Wt.%Si Alloy Slid Against Various Counterface Materials”, Scripta Metall., 25 (1991) 1369.
Tiwari, S.N., Pathak, J.P. and Malhotra, S.L., “Lead- A Potential Soft-Phase Alloying Addition to Aluminum Bearing Alloys”, Aluminum, 63 (1987) 411.
Yasmin, T., Khalid, A.A. and Haque, M.M., “Tribological (Wear) Properties of Aluminum-Silicon Eutectic Base Alloy Under Dry Sliding Conditions”, J. Mater. Proce. Techno., 153-154 (2004) 833