Quality-Cost Analysis of Gasoline Production Process

محتوى المقالة الرئيسي

Lamyaa.Mohammed. Dawood
Dhuha Kadhim Ismayyir

الملخص

Process capability provides a quantitative measure for gasoline production conformance to specifications.It was measured throughout four consecutive months of the last quarter of 2011. Results revealed high percentages (up to 44%) of non conforming gasoline blends to Iraqi marketing specifications for petroleum products (2000) by inspecting 122 different samples of Iraqi regular gasoline (RON 85).
Quality cost analysis as an important financial control tool was carried out to evaluate Cost of Quality (COQ) which was large due to non conforming gasoline reached up to (722.8 M.ID) in October. In this research COQ was investigated in order to identify the opportunities of gasoline quality improvements through production process. Also customers’ direct cost loss due to poor gasoline quality was verified and calculated, where amounted to its highest value (9.084960 M.ID) at November.

تفاصيل المقالة

كيفية الاقتباس
"Quality-Cost Analysis of Gasoline Production Process" (2013) مجلة الهندسة, 19(12), ص 1634–1646. doi:10.31026/j.eng.2013.12.09.
القسم
Articles

كيفية الاقتباس

"Quality-Cost Analysis of Gasoline Production Process" (2013) مجلة الهندسة, 19(12), ص 1634–1646. doi:10.31026/j.eng.2013.12.09.

تواريخ المنشور

المراجع

Anta D. G., and Cuc L. Denisia,(2008), Total Quality Management and Quality Costs, Journal of Fascicle of Management and Technological Engineering, Vol. vii. No. xvii, PP..1881-1885.

Aufy S.,(2012)." Implementing Statistical Techniques To Enhance Process Capability", M.Sc. Thesis. UOT. Baghdad/Iraq.

Babazadeh S. S , Seyedpour S M , and Ommi F,(2012), Effect of Oxygenates Blending With Gasoline to Improve Fuel Properties, Chinese journal of Mechanical Engineering Vol. 25,aNo. 4, PP. 1-6.

Brinegar C. S. And Miller R. R., (1960), Statistical Estimation of the Gasoline Octane Number Requirement of New Model Automobiles, Technometrics, Vol. 2, No. 1, PP. 5-18.

Gryna, F. M. "Quality Costs" in Juran, (1998), 4th Ed., Juran’s Quality Control Handbook, McGraw-Hill, pages 4.9 - 4.12.

Hwang, G.H. & Aspinwall, E.M., (1996), Quality Cost Models and their applications, J. of TQM, Vol.7, No.3, PP..267-281.

Ismayyir, D. H.(2012), Design Of Quality Control System for Gasoline Production. M.Sc. Thesis. UOT. Baghdad/Iraq.

Ismayyir, D. H, and, Dawood,L.M.,(2012),Assessment of Gasoline Major Quality Parameters, the Sixth Jordan InternationalChemicalEngineeringConference (IJCEC),1214/3/2012.Amman.Jordan.

Jeang A. & Chung C.-P., (2009),Process Capability Analysis Based on Minimum Poduction Cost and Quality Loss, Int. J. Adv Manuf. Technol., Vol. 43,PP.710–719.

Jones D. S. J. and Pujado P. R., (2006), “ practical Advances in petroleum processing”, vol.1.,Springer, Dordrecht.

Kaiser C. R., Borges J. L., Anderson R. dos Santos, Debora A. Azevedo, Luiz A. D'Avila, (2010), Quality control of gasoline by 1H NMR: Aromatics, olefinics, paraffinics, and oxygenated and benzene contents, Fuel, Vol. 89 , PP.99–104 / IVSL.

Matijošius J. and Sokolovskij E. ,(2009), Research into The Quality of Fuels and their Biocomponents. Journal of Transport, Vol.24, No.3, PP. 212–217.

Meyer R. A., "{ petroleum refining processes" third ed., McGraw- Hill, New York, (2004).Ministry of Economic Development, and University of Auckland (2001), “Petrol and Diesel delivering quality”, New Zealand.

Montgomery D. C.,(2006), “Introduction to Statistical Quality Control”,6th .ed John Wiley and Sons. Inc., USA.

Montgomery D. C., Jennings C. L., and Pfund M. E,(2011),”Managing, Controlling, and Improving Quality”, John Wiley and Sons Wiley, INC,USA.

Nelson W.L. (2010),”Fundamentals of Petroleum Refining” ,Elsevier ,UK.

Pandey S. C., Ralli D. K., Saxena A. K., and Alamkhan W. K., (2004). Physicochemical Characterization and Applications of Naphtha, J. of Sci. and Ind. Res., Vol. 63, PP.276- 282.

Pearn WL, Lin PC (2004), Measuring Process Yield Based on The Capability index Cpm, Int. J. Adv. Manuf. Technol. 24(7–8): PP. 503–508.

Phuong T. M. Do, Crossley S., Santikunaporn M. and Resasco D. E., (2007), Catalytic strategies for improving specific fuel Properties, Catalysis, Vol.20, PP.33–64.

Rasamanie M. and Kanapathy K., (2011), The Implementation of Cost of Quality (COQ) Reporting System in Malaysian Manufacturing Companies: Difficulties Encountered and Benefits Acquired. International Journal of Business and Social Science, Vol. 2 No. 6; PP .243-247.

Rao A., Carr L. P., Martin I. D., J., Rafii F., and Schlesinger P. F.,(1998),”Total Quality Management: A Cross Functional Perspective, John Wiley and Sons, USA.

Rezain K., Taghizadeh M.R. and Ostadi B., (2006) "A Practical Implementation of the Process Capability Indices", Journal of Applied Sciences, Vol.6, No.5, PP.1182-1185,.

Rowe G. S., Cuomo A. M, Coakely M., Sorrell W. H, Yotte K. A (2007)”Reports on Petroleum Products Markets in the North West”, Attorneys General of Main. Massachusetts, New Hampshire, and Vermont.

Schiffauerova A. and Thomson V., (2006), A Review of Research on Cost of Quality Models and Best Practices, International Journal of Quality and Reliability Management, Vol.23, No.4, PP.1-23 / IVSL

Schiffauerova A. and Thomson V., (2006), Managing Cost of Quality: Insight into Industry Practice, The TQM Magazine, pp.1-10 / IVSL.

Singh A., Forbes J.F., Vermeer P.J., and Woo S.S., (2000), Model- Based Real-Time Optimization of Automotive Gasoline Blending Operations, Journal of Process Control, Vol.10, PP. 43-58,.

Sun J., Wang S. and Fu Z., (2010) "Process Capability Analysis and Estimation Scheme for Autocorrelated Data ", J. Syst. Sci. Sys. Eng.,PP.105-127.

Xu Xiaohong; Cai Jin; Liu Quanshan; and Xue Qunji1,(2011), Effect of Gasoline Property on Formation of Intake Valve and Combustion Chamber Deposits, China Petroleum Processing and Petrochemical Technology Scientific Research, Vol. 13, No. 3, PP . 27-32.

Worldwide Fuel Charter (WFC), (2012) Fifth Edition

المؤلفات المشابهة

يمكنك أيضاً إبدأ بحثاً متقدماً عن المشابهات لهذا المؤلَّف.