Improving Press Bending Production Quality through Finite Element Simulation: Integration CAD and CAE Approach

محتوى المقالة الرئيسي

Erico Sofyan Chrissandhi
Eko Pujiyanto
Tonny A. Yuniarto

الملخص

Efficient operations and output of outstanding quality distinguish superior manufacturing sectors. The manufacturing process production of bending sheet metal is a form of fabrication in the industry of manufacture in which the plate is bent using punches and dies to the angle of the work design. Product quality is influenced by plate material selection, which includes thickness, type, dimensions, and material. Because no prior research has concentrated on this methodology, this research aims to determine V-bending capacity limits utilizing the press bending method. The inquiry employed finite element analysis (FEA), along with Solidworks was the tool of choice to develop drawings of design and simulations. The ASTM E290 standard guides this study. The software in this package may combine CAD (Computer-Aided Design) and CAE (Computer-Aided Engineering) without requiring extra design applications. This study tested SPCC and SPHC plate materials with five thickness variations. The findings embrace the number of failure risks associated with press bending exhibited on the von Mises stress diagram, which is directly proportional to showing the thickness limit of each material type throughout the bending process. The study's findings lay the groundwork for improving manufacturing quality by lowering the number of faulty goods produced by trial and error. Because the maximum allowable die width is 12 mm, the thickness limit of the press bending process is 2 mm. However, due to the greater intensity of the SPCC material, it has a reduced defect rate compared to SPHC material.

تفاصيل المقالة

كيفية الاقتباس
"Improving Press Bending Production Quality through Finite Element Simulation: Integration CAD and CAE Approach" (2024) مجلة الهندسة, 30(01), ص 26–40. doi:10.31026/j.eng.2024.01.02.
القسم
Articles
السير الشخصية للمؤلفين

Erico Sofyan Chrissandhi، Universitas Sebelas Maret

Erico Sofyan Chrissandhi is a postgraduate student in the Industrial Engineering Departement of Sebelas Maret University. His research interest are design manufacturing, quality design, service quality, management quality, process optimization.

Eko Pujiyanto، Universitas Sebelas Maret

Eko Pujiyanto is a lecturer and researcher in the Departement of Industrial Engineering Departement, Sebelas Maret University. His research interest are modeling and optimization of sustainable manufacturing process using statistical and computational, and data analysis and optimization using heuristics, sustainable manufacturing modeling, experimental-based research related to biomaterials using the Taguchi Method. He has publication indexed by Scopus with 46 articles with a six H-index. His email is [email protected]

Tonny A. Yuniarto، Universitas Atma Jaya Yogyakarta

A. Tonny Yuniarto is a lecturer and researcher in the Departement of Industrial Engineering Departement, Atma Jaya Yogyakarta University. His research interests are CAD, CAM, CNC, CAE, Art Design, and Engineering Mechanics. He has publication indexed by Scopus with 38 articles with a four H-index. His email is [email protected].

كيفية الاقتباس

"Improving Press Bending Production Quality through Finite Element Simulation: Integration CAD and CAE Approach" (2024) مجلة الهندسة, 30(01), ص 26–40. doi:10.31026/j.eng.2024.01.02.

تواريخ المنشور

المراجع

Abe, Y., Ijichi, W., Mori, K., and Nakagawa, K., 2020. Hemming with Pre-Bent Inner Sheet for Joining Ultra-High Strength Steel Sheets of Automobile Parts. Journal of Manufacturing and Materials Processing, 4(77), pp. 1–12. Doi:10.3390/jmmp4030077

ADE., 2018. ATMI Duta Engineering hi-tech sheet metal fabrication with laser technology : Products. https://ade.co.id/ (accessed Jan. 05, 2023)

Al-Gasham, T.S.S., 2016. Experimental Behavior of Steel-Concrete-Steel Sandwich Beams with Truss Configuration of Shear Connectors. Journal of Engineering, 22(4), pp. 18–29. Doi:10.31026/j.eng.2016.04.02

AppliCAD Indonesia., 2014. Solidworks Software Functions. AppliCAD Indonesia Co., Ltd. https://applicadindonesia.com/fungsi-software-solidworks/ (accessed Feb. 25, 2023)

Arisma Data Setia., 2018. Solidworks Simulation. https://arismadata.com/solidworks/products-simulation.php (accessed Feb. 25, 2023)

Armunanto, V.B., Chrissandhi, E.S., Yosef, H., Hernanto, K.G., Herdianto, P.S., and Kurniawan, Y.A.D., 2018. Hemming sheet metal analysis with variation in material type and thickness. Journal Material Dan Proses Manufaktur, 2(2), pp. 136–144. Doi:10.18196/jmpm.2230

ASTM International, 2009. Designation : E 290 - 14 - Standard test methods for bend testing of material for ductility. Doi:10.1520/E0290-14

Bitzel, H., Borcherdt, J., MÜller, J., Neidhart, F., Parey, K., Rau, A., Riecke, S., Schmid, A., Trentmann, G., Vorländer, G., and Zimmermann, K., 2016. The fascinating world of sheet metal, (Bending-sheet metal processing with corners and edges). pp. 100–111, ‎ TRUMPF GMBh.

Boljanovic, V., 2014. Sheet metal forming processes and die design. New York, USA: Industrial Press Inc.

Budiyanti, E., 2016. Reinforcement of Indonesia's manufacturing industry. Pusat Penelitian Badan Keahlian DPR RI, pp. 13–16. http://berkas.dpr.go.id/puslit/files/info_singkat/Info Singkat-VIII-12-II-P3DI-Juni-2016-50.pdf

Bui, A.H., and Le, H., 2016. Strength and microstructure of cold-rolled if steel. Acta Metallurgica Slovaca, 22(1), pp. 35–43. Doi:10.12776/ams.v22i1.690

Červinek, O., Pettermann, H., Todt, M., Koutný, D., and Vaverka, O., 2022. Non-linear dynamic finite element analysis of micro-strut lattice structures made by laser powder bed fusion. Journal of Materials Research and Technology, 18, pp. 3684–3699. Doi:10.1016/j.jmrt.2022.04.051

Chrissandhi, E.S., 2020. Aplikasi finite element untuk optimasi proses desain press bending di PT. Atmi Duta Engineering Surakarta Berbasis Software CAE. Thesis, Atma Jaya Yogyakarta University.

Cheng, X., Guo, X., Tao, J., Xu, Y., El-Atry, A. A., Liu, H., 2019. Investigation of the effect of relative thickness (t0/d0) on the formability of the AA6061 tubes during free bending process. International Journal of Mechanical Sciences, 160(2019), pp. 103-113. Doi:10.1016/j.ijmecsci.2019.06.006

Hai, V.G., Minh, N.T.H., and Nguyen, D.T., 2020. A study on experiment and simulation to predict the spring-back of SS400 steel sheet in large radius of V-bending process. Material Research Express, 7(1), pp. 1–15. Doi:10.1088/2053-1591/ab67f5

Hoe, L.C., and Mansori, S., 2018. The effects of product quality on customer satisfaction and loyalty: evidence from Malaysian engineering industry. International Journal of Industrial Marketing, 3(1), pp. 20–35. Doi:10.5296/ijim.v3i1.13959

Jagota, V., Sethi, A.P.S., and Kumar, K., 2013. Finite Element Method: An overview. Walailak Journal of Science and Technology (WJST), 10(1), pp. 1–8. Doi:10.2004/wjst.v10i1.499

Jain, V., and Sharma, P., 2016. A study of strength analysis in sheet metal by bending process: A review. International Journal of Engineering Sciences & Research Technology, 5(9), pp. 55–60. Doi:10.5281/zenodo.61450

Japanese Standards Association., 2010. JIS G 3131 : Hot-rolled mild steel plates, sheet and strip (Patent No. JIS G 3131 : 2010 (E)). https://www.jfe-steel.co.jp/en/products/sheets/catalog/b1e-001.pdf

Japanese Standards Association., 2011. JIS G 3141 : Cold-reduced carbon steel sheet and strip (Patent No. JIS G 3141 : 2011 (E)). https://www.modiranahan.com/uploads/pdf/JIS-G-3141-2011.pdf

Karuppuswamy, P., Bhagyanathan, C., Sathish, S., and Elangovan, D., 2022. Comparisonal analysis of “V” punches with various radii and its impact on the steel material used for sheet metal operations. Materials, Design and Manufacturing for Sustainable Environment, pp. 113–121. Doi:10.1007/978-981-19-3053-9_10

Kumar, K., Bhadauria, S.S., Singh, A.P., 2021. Finite element analysis of edge and cleavage cracks in U-bend specimen using contour integral approach. Materials Today: Proceedings, 44(1), pp. 865-870. Doi:10.1016/j.matpr.2020.10.789

Krakatau Steel., 2023a. Cold Rolled Coil/Sheet. https://www.krakatausteel.com/viewcontent/18

Krakatau Steel., 2023b. Hot Rolled Coil/Plate. https://www.krakatausteel.com/viewcontent/18

Liu, W.K., Li, S., and Park, H.S., 2022. Eighty years of the finite element method: birth, evolution, and future. archives of computational methods in engineering, 29, pp. 4431–4453. Doi:10.1007/s11831-022-09740-9

Lu, K., Luo, J., Zou, T., Li, D., Peng, Y., 2020. Axial formation and cross-section distortion control for stretch bending based on batch simulations. IOP Conference Series: Materials Science and Engineering, 967, pp. 1-13. Doi:10.1088/1757-899X/967/1/012038

Miranda, S.S., Barbosa, M.R., Santos, A.D., Pacheco, J.B., Amaral, R.L., 2018. Forming and springback prediction in press brake air bending combining finite element analysis and neural networks. Journal of Strain Analysis for Engineering Design, 53(8), pp.1-18. Doi:10.1177/0309324718798222

Naipinij, S., Sukieum, S., Namprai, R., and Nilsonthi, T., 2022. To, formation of thermal oxide scale and its adhesion Strip, hot-rolled low carbon steels with different final thicknesses. E3S Web of Conferences 355. Doi:10.1051/e3sconf/202235502008

Okereke, M., and Keates, S., 2018. Computational Mechanics and the Finite Element Method. Springer International Publishing. Doi:10.1007/978-3-319-67125-3_1

Omran, S.H., 2013. Development of quality rating evaluation of outgoing product case study applied at the general company for vegetable oils. Journal of Engineering, 19(4), pp. 67–82. Doi:10.31026/j.eng.2013.04.10

Putra, Y.E.A., Anggoro, P.W., Yuniarto, T., Bayuseno, A.P., Jamari, and Bawono, B., 2019. Optimization of mechanical parameters on outsole shoes orthotic comfort using finite element analysis. International Biomedical Instrumentation and Technology Conference (IBITeC), pp. 31–36. Doi:10.1109/IBITeC46597.2019.9091719

Ruchiyat, A., Anhar, M., Yusuf, and Polonia, B.S.E., 2019. The effect of heating temperature on the hardness, microstructure and v-bending spring back results on commercial steel plate. Journal of Applied Engineering and Technological Science, 1(1), pp. 1–16. Doi:10.37385/jaets.v1i1.10

Sahu, Y.K., and Pradhan, M.K., 2020. Modelling and simulation of deep drawing process of circular cup on AL1200 using finite element analysis. Advances in Simulation, Product Design and Development, pp. 29–42. Doi:10.1007/978-981-32-9487-5_3

Saravanan, S., Saravanan, M., and Duraisamy, J., 2018. Study on effects of spring back on sheet metal bending using simulation methods. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8(2), pp. 923–932. Doi:10.24247/ijmperdapr2018106

Statistik, B.P., 2023. Proporsi Tenaga Kerja pada Sektor Industri Manufaktur (Persen) 2019-2022. https://www.bps.go.id/indicator/9/1217/1/proporsi-tenaga-kerja-pada-sektor-industri-manufaktur.html

Sukarman, S., Anwar, C., Rahdiana, N., Khoirudin, K., and Ramadhan, A.I., 2020. Analysis of the effect of radius dies on springback of stainless-steel sheet metal in the v-die hydraulic bending process. Jurnal Teknologi, 12(2), pp. 123–132. Doi:10.24853/jurtek.12.2.123-132

Syed, I.S., Mohamed, O.A., and Rahman, S.A., 2016. Non-linear Finite Element Analysis of Offshore Stainless Steel Blast Wall under High Impulsive Pressure Loads. Procedia Engineering, 145(2016), pp. 1275–1282. Doi:10.1016/j.proeng.2016.04.164

Thuillier, S., Maoût, N.Le, and Manach, P.Y., 2010. Bending limit prediction of an aluminium thin sheet. International Journal of Material Forming, 3(1), pp. 223–226. Doi:10.1007/s12289-010-0747-7

TRUMPF., 2018. Bending Tools : TruBend Cell 7000. TRUMPF Maschinen Austria GesmbH & Co. Kg.

https://www.trumpf.com/filestorage/TRUMPF_Master/Products/Services/01_brochures/TRUMPF-bending-tools-catalog-TruBend-Cell-7000-EN.pdf

Wang, J., Verma, S., Alexander, R., and Gau, J.T., 2008. Springback control of sheet metal air bending process. Journal of Manufacturing Processes, 10(1), pp. 21–27. Doi:10.1016/j.manpro.2007.09.001

Zhang, A., Xie, Z., Shi, L., Zhang, Y., Zhou, D., and Zhang, X., 2022. Research on the Simplified method of non-linear finite element analysis for CFS-SPR connections. Research on the Simplified Method of Non-linear Finite Element Analysis for CFS-SPR Connections, 12(1925), pp. 1–20. Doi:10.3390/buildings12111925

المؤلفات المشابهة

يمكنك أيضاً إبدأ بحثاً متقدماً عن المشابهات لهذا المؤلَّف.