PREPARATION OF ACTIVATED CARBONS FROM DATE STONES BY CHEMICAL ACTIVATION METHOD USING FeCl3 and ZnCl2 as ACTIVATING AGENTS
محتوى المقالة الرئيسي
الملخص
Date stones were used as precursor for the preparation of activated carbons by chemical
activation with ferric chloride and zinc chloride. The effects of operating conditions represented
by the activation time, activation temperature, and impregnation ratio on the yield and adsorption
capacity towards methylene blue (MB) of prepared activated carbon by ferric chloride activation
(FAC) and zinc chloride activation (ZAC) were studied. For FAC, an optimum conditions of 1.25
h activation time, 700 °C activation temperature, and 1.5 impregnation ratio gave 185.15 mg/g
MB uptake and 47.08 % yield, while for ZAC, 240.77 mg/g MB uptake and 40.46 % yield were
obtained at the optimum conditions of 1.25 h activation time, 500 °C activation temperature, and
2 impregnation ratio. The equilibrium data for MB adsorption on prepared activated carbons at
optimum conditions were well represented by the Langmuir isotherm model, giving maximum
MB uptake of 304.51 and 387.54 mg/g for FAC and ZAC, respectively. Also, the results showed
that the surface area and iodine number of activated carbon prepared by activation with ferric
chloride at optimum conditions were 780.06 m2/g and 761.40 mg/g, respectively. While 1045.61
m2/g surface area and 1008.86 mg/g iodine number were obtained for ZAC prepared at optimum
conditions.
تفاصيل المقالة
كيفية الاقتباس
تواريخ المنشور
المراجع
Aber S., Khataee A. and Sheydaei M., (2009), Optimization of activated carbon fiber preparation from kenaf using K2HPO4 as chemical activator for adsorption of phenolic compounds, Bioresource Technology, 100, 6586-6591.
Adekola F.A. and Adegoke H.I., (2005), Adsorption of blue-dye on activated carbons produced from Rice Husk, Coconut Shell and Coconut Coir pitch, Ife Journal of Science, 7(1), 151-157.
Ahmedna M., Marshall W.E., Rao R.M., and Clarke S.J., (1997), Use of filteration and buffers in raw sugar colur measurement, J. Sci. Food Agric., 75(1), 109-116
Alhamed Y.A., (2006), Activated carbon from date stones by ZnCl2 actiivation, JKAU: Eng. Sci., 17 (2), 75-100.
Alhamed Y.A., (2009), Adsorption kinetics and performance of packed bed adsorber for phenol removal using activated carbon from dates stones, J. of Hazardous Material, 170, 763-770.
ASTM standard, (2000), Standard test method for total ash content of activated carbon, Designation D2866-94.
Avelar F.F., Bianchi M.L., Goncalves M., and Damota E.G., (2010), The use of piassava fibers (Attalea funifera) in the
preparation of activated carbon, Bioresour. Technol., 101, 4639-4645.
Balathanigaimani M.S., Shim W.G., Park K.H., Lee J.W., and Moon H., (2009), Effect of structural and surface energetic
heterogeneity properties of novel corn grain based activated carbon on dye adsorption, Microporoes & Mesoporous Mater., 118, 232-238.
Bouchelta C., Medjran M.S., Bertrand O., and Bellat J., (2008), Preparation and characterization of activated carbon from
date stones by physical activation with steam, J. Anal. Appl. Pyrolysis, 28, 70-77.
Brunauer S., Emmett P.H., and Teller E., (1938), Adsorption of gases in multimolecular layers, J. Am. Chem. Soc.,
, 309-319.
Budinova T., Petrov N., Parra J., and Baloutzov V., (2008), Use of an activated carbon from antibiotic waste for the removal
of Hg(II) from equous solutions, J. Environm. Manage, 88, 165-172.
Chandra T.C., Mirna M.M., Sunarso J. and Sudaryanto I.S., (2009), Activated carbon from durian shell: preparation and
characterization, J. of the Taiwan Institute of chemical Engineers, 40, 457-462.
Demiral H., Demiral I., Tumsek F., and Karabacakoglu B., (2008), Pore strucuture of activayted carbon prepared from hazelnut bagasse by chemical activation, Surface Interface Analysis, 40, 616-619.
Egwaikhide P.A., Akporhonor E.E, and Okieimen, (2007), Utilization of Coconut fibre Carbon in the removal of Soluble
Petroluem fraction polutted water, International Journal of physical sciences, 2(2), 047-049.
Fadhil A.B. and Deyab M.M., (2008), Conversion of some fruit stones and shells into activated carbons, The Arabain Journal for Science and Engineering, 33(2A), 175-184.
Girgis B.S. and El-Hendawy A., (2002), Porosity development in activated carbon obtained from date pits under chemical
activation with phosphoric acid, Microporoes & Mesoporous Mater., 52,105-117.
Guo Y. and Rockstraw D.A., (2007), physicochemical properties of carbons prepared from pecan shell by phosphoric
acid activation, Bioresour. Technol., 98, 1513-1521.
Haimour N.M. and Emeish S., (2006), Utilization of date stones for production of activated carbon using phosphoric acid,
Waste Management, 26, 651-660.
Hameed B.H., Ahmad A.L. and Latiff K.N.A., (2007), Adsorption of basic dye (methylene blue) onto activated carbon
prepared from rattan sawdust, Dyes & Pigments, 75, 143-149.
Hameed B.H., Salman S.M. and Ahmad A.L., (2009), Adsorption isotherm and kinetic modeling of 2,4-D-pesticide on
activated carbon derived from date stones, J. of Hazardous Material, 163, 121-126.
Kalderis D., Koutoulakis D., Paraskeva P., and Fernaandez-Pereira C., (2008), Adsorption of polluting substances on
activated carbons prepared from rice husks and sugar cane bagasse, Chem. Eng. J., 144, 42-50.
Kalderis D., Bethanis S., Paraskeva P., and Diamadopoulos E., (2008), Production of activated carbon from bagasse and ricehusk by a single stage chemical activation method at low retention times, Bioresour. Technol., 99 (15), 6809-6816.
Y.S., (2001), Production of granular activated carbon from waste walnut shell and its adsorption characteristic for Cu +2
ion, J Hazard. Mater., 85, 301-315.
Lua A.C., lau F.Y.and Guo J., (2006), Influence of pyrolysis conditions on pore development of oil palm shell activated
carbon, J Anal. Appl. Pyrolysis, 27, 96-102.
Lubrizol standard test method, (2006), iodine value, test procedure AATM 1112-01, October 16.
Mestre J., Pires J., Nogueira M.F., and Ania C.O., (2009), Waste derived activated carbons for removal of ibuprofen from
solution: role of surface chemistry and pore structure, Bioresour. Technol., 100 (5), 1720-1726.
Mohanty K., Das D., and Biswas M.N., (2006), Preparation and characterization of activated carbons from sterculia alata
nutshell by chemical activation with zinc chloride to remove phenol from waste water, Adsorption, 12, 119-132.
Olivares-Marin M., Fernandez-Gonzalez C., Macias-Garcia A., and Gomez-Serrano V., (2006), Preparation of activated carbon from cherry stones by chemical activation with ZnCl2, Applied surface science, 225, 5967-5971.
Oliveira L.C.A., Pereira E., Guimaraes I.R., and Sapag K., (2009), Preparation of activated carbons from coffee husks
utilizing FeCl3 and ZnCl2 as activating agents, J. of Hazardous Materails, 165, 87-94.
Rufford T.E., Hulicova-Jurcakova D., Zhu Z., and Lu G.Q., (2010), A comparative study of chemical treatment by FeCl3,
MgCl2, and ZnCl2 on microstructure, surface chemistry, and double-layer capacitance of carbons from waste biomass, J. of Material Research, 25 (8), 1451-1459.
Sudaryanto Y., Hartono S.B., Irawaty W., and Ismadji S., (2006), High surface area activated carbon prepared from cassava peel by chemical activation, Bioresour. Technol., 97, 734-739.
Tamai H., Nobuaki U., and Yasuda H., (2009), Preparation of Pd supported mesoporous activated carbons and their
catalytic activity, Mater. Chem. Physi. , 114, 10-13.
Tan I.A. W., Hameed B.H. and Ahmad A.L., (2007), Equilibrium and kinetic studies on basic dye adsorption by oil palm fiber activated carbon, Chem. Eng. J., 127, 111-119.
Tongpoothorn W., Sriuttha M., Homchan P. and Ruangviriyachai, (2011), Preparation of activated carbon derived from Jatropha Curcas fruit shell by simple thermochemical activation and characterization of their physico-chemical properties, Chem. Eng. Res. & Design, 89, 335-340.
Ucar S., Erdem M., Tay T., Karagoz S., (2009), Preparation and characterization of activated carbon produced from
pomegranate seeds by ZnCl2 activation, Applied surface science, 225, 8890-8896.
Yavuz R., Akyildiz H., Karatepe N., Cetinkaya E., (2010), Influence of preparation conditions on porous structures
of olive stones activated by H3PO4, Fuel Processing Technology, 91, 80-87.