THE STATIC ANALYSIS OF COMPOSITE AIRCRAFT WINGBOX STRUCTURE
محتوى المقالة الرئيسي
الملخص
In this paper, the static analysis for finding the best location of boxes inside the composite wing-box structure has been performed. A software ANSYS (ver.11) was used to analyses the Aluminum wing to find the maximum stresses reached in. These results are used as a base for the composite wingbox to find the numbers of layers and location of the box beam and its dimensions so that the composite wingbox may carry the same loading conditions in the Aluminum wing. Analysis showed that a composite wingbox having two boxes is better than the single or triple boxes wing based on stress to weight ratio. Mass saving of (40%) had been achieved when composite wing-box is used instead of Aluminum wing.
تفاصيل المقالة
كيفية الاقتباس
تواريخ المنشور
المراجع
Chi-Young Ryu, Jung-Ryul Lee, Chun-Gon Kim and Chang-Sun Hong "Buckling behavior monitoring of a composite wing box using multiplexed and multi-channeled builtin fiber bragg grating strain sensors", NOT&International 41, (2008), 534-543.
E. S. Greenhalgh, C. M. Pastore and M. Garfinkle "A continuous-fiber composite wing box-beam exhibiting twist-bend
coupling", composite engineering, vol.3, Nos 7-8, pp.691-697, 1993.
G. Aston and F. W. Williams "Simplified methods for the buckling analysis of composite multi-spar wing boxes", Composite Structures28, (1994), 215-223.
Guo S.J., Bannerjee J.R. and Cheung C.W. "The effect of laminate lay-up on the flutter speed of composite wings", Journal of aerospace engineering, vol.217, No.(3), pp115-122, 2003.
Lie Qiu and Shenfang Yuan ''On development of a multi-channel PZT array scanning system and its evaluating application on UAV wing box'', Sensors and Actuators A 151 (2009) 220–230.
M. B. Snell and P. Bartholomew "The engineering optimization of hybrid composite/metallic wing boxes for buckling
and strength constraints", Composite Structures7, (1987), 21-58.
MasoudRais-Rohani "Global-local analysis and optimization of a composite civil tilt-rotor wing", NASA Langley grant NAG 1- 1571,2004.
Megson T.H.G "Aircraft structure for engineering students" Arnold, 1999.
Michael Koundouros, Brian G. Falzon, Costas Soutis and Steven J.Lord "Predicting the ultimate load of a CFRP wing box",
composite: part A35, (2004), 895-903.
Peter W. G. De Baets, Rupinder S. Battoo and Dimitri N. Mavris "Aeroelastic analysis of a Composite wing box with varying root flexibity", AIAA-2000-1623.
Shijun Guo ''Aeroelastic optimization of an aerobatic aircraft wing structure'', Aerospace Science and Technology 11 (2007) 396–404.
Sid Buchanan "Development of a wing box rib for a passenger Jet aircraft using design optimization and constrained to traditional design and manufacture requirements", Altair Engineering, 2007.