NONLINEAR ANALYSES OF PARTIALLY COMPOSITE STEEL BEAMS ENCASED IN CONCRETE WITH INNOVATIVE POSITION OF STUD BOLTS
محتوى المقالة الرئيسي
الملخص
Static behavior of three partially encased composite steel beams with cambering under flexural condition is investigated in the context of studying some alternative positions for the headed studs. Shear resistance between the cambered I-shaped beam and the concrete was provided by headed studs in two positions: vertically welded on the bottom flange and horizontally welded on the faces of the web. In the present study, a nonlinear three-dimensional finite element analysis has been used to predict the load-deflection and moment-rotation behaviors of composite encased beams consisting of steel sections using the finite element computer program (ANSYS V. 10). Composite encased beams are analyzed and a comparison is
made with available experimental load-deflection curves, good agreement with the experimental results is observed. Cambering of steel section is introduced on the steel section of the composite beams encased in concrete. It is found that using of steel section with cambering can increase the ultimate load capacity of the composite encased beam by relatively (15%) and also it is found that deflection are nearly (65% to 80%) the deflection of the same beam without cambering. Parametric studies have been carried out to study the increasing of the momentcarrying capacity due to the use of encased concrete; meanwhile the slip along the beams length is studied. The strain distributions along the steel section and encased concrete depth are also examined. The effects of concrete compressive strength on the stiffness of the composite encased beams are also investigated with the Poisson’s ratio of concrete and the effect of
cambering of steel-section.
تفاصيل المقالة
كيفية الاقتباس
تواريخ المنشور
المراجع
* EUROCODE 4. In: Design of composite steel and concrete structures – Part 1-1: General Rules and rules for buildings. European Committee for Standardization; 2004.
* ANSI/AISC 360-05. In: Specification for structural steel buildings. American Institute of Steel Construction; 2005.
*] PR NBR 8800. In: Design of steel and composite structures for buildings. Brazilian Association of Standard Codes; 2007.
* N. Roussel, S. Staquet, L. D’Aloia Schwarzentruber, R. Le Roy, and F. Toutlemonde, "SCC Casting Prediction for the Realization of Prototype VHPC-Precambered Composite Beams", Materials and Structures, Vol. 40, 2007, pp.333–333 .
* Bernuzzi C, Zandonini R. In: Buckner D, Shahrooz BM, editors. Slim floor steel–concrete Composite systems. Composite construction in steel and concrete, vol. III. Germany: ASCE; 1996. p. 486–99.
* Breuninger U. Design of lying studs with longitudinal shear force. In: International Symposium on connections between steel and concrete; 2001. p.1015–24.
* Dipaola V, Prete F, Prete G. The elasto-plastic behaviour of encased composite beams for Slim floors in multi-storey buildings. In: 2nd international congress–Fib. Naples: FIB. 2006. p. 1–12 (ID 5-24).
* Kuhlmann U, Kürschner K. Structural behaviour of horizontally lying shear studs. In: 5th International conference in composite construction in steel and concrete. South Africa; 2005. p. 534–43.
* Ju Y-K, Kim S-D. Structural behavior of alternative low floor height system using structural Tee, half precast concrete, and horizontal stud. Canadian J. Civil Engineering 2005;32(2):329–38.
* Hegger J, Goralski C. Structural behavior of partially concrete encased composite sections With high strength concrete. In: 5th international conference in composite construction in Steel and concrete. South Africa; 2005, p. 346–55.
* Silvana De Nardin, and Ana Lucia H.C. El Debs, "Study of Partially Encased Composite Beams with Innovative Position of Stud Bolts"Journal of Constructional Steel Research, March-2008, pp.3–3 .
* Swanson Analysis Systems, ANSYS. Online manual, version10.0 (2005) and Theory Reference.10th ed. Swanson Analysis Systems, s.1., s.d.
* Method of Manufacturing Preflex Beams", World Intellectual Property Organization (International Bureau), International Publication Number: WO 01/18319 A1, International Publication Date: 15 March 2001, pp 1-56.
* F.D. Queiroza, P.C.G.S. Vellascob, and D.A. Nethercota, "Finite Element Modeling of Composite Beams with Full and Partial Shear Connection", Journal of Constructional Steel Research, Vol.63, 2007, pp.505–521.