Incorporating Recycled Crumb Rubber into Asphalt: A Comprehensive Review
محتوى المقالة الرئيسي
الملخص
Using asphalt mixtures with added materials became a significant field for enhancing asphalt properties. Crumb rubber or recycled tire rubber is one of these materials that gained great attention because it provides asphalt mixtures with enhanced properties and with the privilege of being economically and environmentally efficient where it reduces the waste tires from being disposed to nature. This study explores the latest articles in this field with a focus on different methods used to incorporate crumb rubber (CR) into the asphalt matrix. It has been noticed that most articles focus on the wet process for incorporating CR into asphalt. This method is known for its efficiency, but it consumes less CR as compared to the dry process. The dry process deals with CR as a substitute rather than an additive, but it is used less around the world in enhancing asphalt properties where it has less effect on asphalt characteristics development. The third method (terminal) is a mix between the mentioned methods and comprises the prospectives of both methods. The need for this research is underscored by the growing environmental and economic challenges associated with waste tire disposal and the continual degradation of road infrastructure. This study contributes to developing more sustainable, durable, and cost-effective road paving solutions by exploring the efficacy and methods of crumb rubber integration into asphalt.
تفاصيل المقالة
كيفية الاقتباس
تواريخ المنشور
الإستلام
النسخة النهائية
الموافقة
النشر الالكتروني
المراجع
Ahmad, O.A., 2015. Using crumb rubber (CR) of the scrap tire in hot mix asphalt design. Department of Civil Engineering Faculty of Engineering Technology, Zarqa University, Zarqa, Jordan, https://doi.org/10.3844/ajassp.2017.274.285.
Akca, E., Gursel, A., and Sen, N., 2018. A review on devulcanization of waste tire rubber. Periodicals of engineering and natural sciences, 6(1), pp. 154-160, https://doi.org/10.21533/pen.v6i1.167.
Al-Azawee, E.T., and Qasim, Z.I., 2018. The influence of crumb rubber modifier (CRM) on the properties of asphalt concrete mixtures. International Journal Civil Engineering Technology, 9(10), pp. 201-212. http://iaeme.com/Home/issue/IJCIET?Volume=9&Issue=10.
Albayati, A.H., 2012. Mechanistic evaluation of lime-modified asphalt concrete mixtures. In 7th RILEM International Conference on Cracking in Pavements: Mechanisms, Modeling, Testing, Detection and Prevention Case Histories (pp. 921-940). Dordrecht: Springer Netherlands,. https://doi.org/10.1007/978-94-007-4566-7_89.
Albayati, A.H., 2017. Influence of temperature upon permanent deformation parameters of asphalt concrete mixes. Journal of Engineering, 23(7), pp. 14-32, https://doi.org/10.31026/j.eng.2017.07.02.
Al-Fayyadh, Z.T., and Al-Mosawe, H., 2022. The effect of short-term aging on warm mix asphalt moisture performance. Civil Engineering Journal, 8(12), pp. 2789-2802, https://doi.org/10.28991/CEJ-2022-08-12-09.
Al-Mosawe, H.M., 2023. Enhancing Asphalt Mixture Performance with Crumb Rubber: A Sustainable Solution for Improved Durability and Mechanical Properties. In E3S Web of Conferences (Vol. 427, p. 03017). EDP Sciences, https://doi.org/10.1051/e3sconf/202342703045.
Alsheyab, M. A., Khedaywi, T., and Ogiliat, O., 2023. Effect of waste Tire rubber on properties of asphalt cement and asphalt concrete mixtures: state of the art. International Journal of Pavement Research and Technology, pp. 1-12, https://doi.org/10.1007/s42947-023-00361-4.
Al-Soudany, K. Y., Mohammed, H. H., Hussein, L. Y., and Qasim, Z. I., 2023. Experimental study of the effect of crumb rubber on properties of asphalt mix by wet process. In E3S Web of Conferences (Vol. 427, p. 03034). EDP Sciences. https://doi.org/10.1051/e3sconf/202342703034.
Asam, 2001. Laboratory evaluation of the effect of Superpave gradations and polymer-modified asphalts on pavement performance (Doctoral dissertation, Ohio University).
Asaro, L., Gratton, M., Seghar, S., and Hocine, N. A., 2018. Recycling of rubber wastes by devulcanization. Resources, Conservation and Recycling, 133, pp. 250-262, https://doi.org/10.1016/j.resconrec.2018.02.016.
Bakheit, I., and Xiaoming, H., 2019. Modification of the dry method for mixing crumb rubber modifier with aggregate and asphalt based on the binder mix design. Construction and Building Materials, 220, pp. 278-284, https://doi.org/10.1016/j.conbuildmat.2019.06.050.
Blumenthal, M. H., 1996. Producing ground scrap tire rubber: a comparison between ambient and cryogenic technologies (No. CONF-960345-). American Society of Mechanical Engineers, New York, NY (United States),
Brasileiro, L., Moreno-Navarro, F., Tauste-Martínez, R., Matos, J., and Rubio-Gámez, M.D.C., 2019. Reclaimed polymers as asphalt binder modifiers for more sustainable roads: A review. Sustainability, 11(3), P. 646, https://doi.org/10.3390/su11030646.
Bressi, S., Fiorentini, N., Huang, J., and Losa, M., 2019. Crumb rubber modifier in road asphalt pavements: State of the art and statistics. Coatings, 9(6), P. 384, https://doi.org/10.3390/coatings9060384.
Biligiri, K. P., and Way, G. B., 2014. Noise-damping characteristics of different pavement surface wearing courses. Road Materials and Pavement Design, 15(4), pp. 925-941, https://doi.org/10.1080/14680629.2014.902768.
Cao, W., 2007. Study on properties of recycled tire rubber modified asphalt mixtures using dry process. Construction and building materials, 21(5), pp. 1011-1015, https://doi.org/10.1016/j.conbuildmat.2006.02.004.
Cetin, A., 2013. Effects of crumb rubber size and concentration on performance of porous asphalt mixtures. International Journal of Polymer Science, 2013, https://doi.org/10.1155/2013/789612.
Cong, P., Xun, P., Xing, M., and Chen, S., 2013. Investigation of asphalt binder containing various crumb rubbers and asphalts. Construction and Building Materials, 40, pp. 632-641, https://doi.org/10.1016/j.conbuildmat.2012.11.063.
Brito, J., and Saikia, N., 2012. Recycled aggregate in concrete: use of industrial, construction and demolition waste. Springer Science & Business Media.
Deshmukh, N.H., and Kshirsagar, D.Y., 2017. Utilization of rubber waste in construction of flexible pavement. International Journal for Advance Research and Development, 2(7), pp. 70-77, https://doi.org/10.4028/www.scientific.net/KEM.599.361.
Eltwati, A. S., Saad, I., and Elsaiti, A., 2019. The effect of crumb rubber on properties of asphalt mix by dry process. The International Journal of Engineering and Information Technology (Ijeit), 5(1).
Esch, D. C., 1982. Construction and benefits of rubber-modified asphalt pavements (No. AK-RD-82-17). Alaska. Dept. of Transportation and Public Facilities.
Fini, E. H., Hosseinnezhad, S., Oldham, D., Mclaughlin, Z., Alavi, Z., and Harvey, J., 2019. Bio-modification of rubberised asphalt binder to enhance its performance. International Journal of Pavement Engineering, 20(10), pp. 1216-1225, https://doi.org/10.1080/10298436.2017.1398548.
Garcia, P. S., De Sousa, F. D. B., De Lima, J. A., Cruz, S. A., and Scuracchio, C. H., 2015. Devulcanization of ground tire rubber: Physical and chemical changes after different microwave exposure times. Express Polymer Letters, 9(11), https://doi.org/10.1038/s41598-020-73543-w.
Ghavibazoo, A., and Abdelrahman, M., 2013. Composition analysis of crumb rubber during interaction with asphalt and effect on properties of binder. International Journal of Pavement Engineering, 14(5), pp. 517-530, https://doi.org/10.1080/10298436.2012.721548
Hallmark-Haack, B. L., Hernandez, N. B., Williams, R. C., and Cochran, E. W., 2019. Ground tire rubber modification for improved asphalt storage stability. Energy & Fuels, 33(4), pp. 2659-2664, https://doi.org/10.1021/acs.energyfuels.8b03558.
Hassan, N. A., Almusawi, A. A. A., Mahmud, M. Z. H., Abdullah, N. A. M., Shukry, N. A. M., Mashros, N., ... and Yusoff, N. I. M., 2019. Engineering properties of crumb rubber modified dense-graded asphalt mixtures using dry process. In IOP Conference Series: Earth and Environmental Science (Vol. 220, No. 1, p. 012009). IOP Publishing , https://doi.org/10.1088/1755-1315/220/1/012009.
Hassan, N. A., Hainin, M. R., Yaacob, H., Ismail, C. R., and Yunus, N. Z. M., 2013. Evaluation on mix design and rutting resistance of dry mixed rubberised asphalt mixtures. Jurnal Teknologi, 65(3), pp. 115-120, https://doi.org/10.11113/jt.v65.2156.
Hassana, N. A., Airey, G. D., Jaya, R. P., Mashros, N., and Aziz, M. M. A., 2014. A review of crumb rubber modification in dry mixed rubberised asphalt mixtures. Jurnal Teknologi (Sci. Eng.), 4, pp. 127-134, https://doi.org/10.11113/jt.v70.3501.
Huang, B., Mohammad, L. N., Graves, P. S., and Abadie, C., 2002. Louisiana experience with crumb rubber-modified hot-mix asphalt pavement. Transportation Research Record, 1789(1), pp. 1-13, https://doi.org/10.3141/1789-01.
Irfan, M., Ali, Y., Ahmed, S., and Hafeez, I., 2018. Performance evaluation of crumb rubber-modified asphalt mixtures based on laboratory and field investigations. Arabian Journal for Science and Engineering, 43, pp. 1795-1806, https://doi.org/10.1007/s13369-017-2729-2.
Issa, C. A., and Salem, G., 2013. Utilization of recycled crumb rubber as fine aggregates in concrete mix design. Construction and Building Materials, 42, pp. 48-52. https://doi.org/10.1016/j.conbuildmat.2012.12.054.
Issa, Y., 2016. Effect of adding waste tires rubber to asphalt mix. International Journal of Scientific Research and Innovative Technology, 3(5), pp.61-68, https://doi.org/10.1007/s42947-023-00361-4.
Jamrah, A., Kutay, M. E., and Varma, S., 2015. Backcalculation of swollen crumb rubber modulus in asphalt rubber binder and its relation to performance. Transportation Research Record, 2505(1), pp. 99-107, https://doi.org/10.3141/2505-13.
Karakurt, C., 2015. Microstructure properties of waste tire rubber composites: an overview. Journal of Material Cycles and Waste Management, 17, pp. 422-433. https://doi.org/10.1007/s10163-014-0263-9.
Kocsis, J., Mészáros, L., and Bárány, T., 2013. Ground tyre rubber (GTR) in thermoplastics, thermosets, and rubbers. Journal of Materials Science, 48, pp.1-38.https://doi.org/10.1007/s10853-012-6564-2.
Khedaywi, T. S., Tamini, A. R., Al-Masaeid, H. R., and Khamaiseh, K., 1993. Laboratory investigation of properties of asphalt-rubber concrete mixtures. Transportation Research Record, (1417), http://worldcat.org/isbn/0309055652.
Lin, P., Huang, W., Tang, N., and Xiao, F., 2017. Performance characteristics of Terminal Blend rubberized asphalt with SBS and polyphosphoric acid. Construction and Building Materials, 141, pp. 171-182,
https://doi.org/10.1016/j.conbuildmat.2017.02.138.
Liu, S., Zhou, S. B., Peng, A., Xuan, W., and Li, W., 2019. Analysis of the performance and mechanism of desulfurized rubber and low‐density polyethylene compound‐modified asphalt. Journal of Applied Polymer Science, 136(45), P. 48194, https://doi.org/10.1002/app.48194.
Mahrez, A., 2008. Properties and performance of stone mastic asphalt reinforced with glass fibre [Ph. D. thesis] Faculty of Engineering, University of Malaya, Kuala Lumpur, Malaysia.
Markl, E., and Lackner, M., 2020. Devulcanization technologies for recycling of tire-derived rubber: A review. Materials, 13(5), P. 1246, https://doi.org/10.3390/ma13051246.
Mashaan, N. S., 2012. The effect of crumb rubber modifier to the properties and rheological behaviour of asphalt binder. University of Malaya (Malaysia), https://doi.org/10.13140/RG.2.2.31131.13607.
Mashaan, N. S., Ali, A. H., Karim, M. R., and Abdelaziz, M., 2012. An overview of crumb rubber modified asphalt. International Journal of Physical Sciences, 7(2), pp. 166-170, https://doi.org/10.5897/IJPSX11.007.
Mashaan, N. S., Ali, A. H., Karim, M. R., and Abdelaziz, M., 2014. A review on using crumb rubber in reinforcement of asphalt pavement. The Scientific World Journal, 2014. https://doi.org/10.1155/2014/214612.
Mohammed, B. S., Hossain, K. M. A., Swee, J. T. E., Wong, G., and Abdullahi, M., 2012. Properties of crumb rubber hollow concrete block. Journal of Cleaner Production, 23(1), pp. 57-67. https://doi.org/10.1016/j.jclepro.2011.10.035.
Mohammed, F. A., Latief, R. H., and Albayati, A. H., 2024. Assessment of traditional asphalt mixture performance using natural asphalt from sulfur springs. Journal of Engineering, 30(01), pp. 54-73. https://doi.org/10.31026/j.eng.2024.01.04.
Mohammed, H. H., and Ali, A. S., 2023. Flexural behavior of reinforced rubberized reactive powder concrete beams under repeated loads. Journal of Engineering, 29(08), pp. 27-46. https://doi.org/10.31026/j.eng.2023.08.03.
Moreno, F., Rubio, M. C., and Martinez-Echevarria, M. J., 2012. The mechanical performance of dry-process crumb rubber modified hot bituminous mixes: The influence of digestion time and crumb rubber percentage. Construction and Building Materials, 26(1), pp. 466-474. http://dx.doi.org/10.1016/j.conbuildmat.2011.06.046.
Navarro, F. M., and Gámez, M. C. R., 2012. Influence of crumb rubber on the indirect tensile strength and stiffness modulus of hot bituminous mixes. Journal of materials in civil engineering, 24(6), pp. 715-724. https://doi.org/10.1061/(ASCE)MT.1943-5533.
Nejad, F. M., Aghajani, P., Modarres, A., and Firoozifar, H., 2012. Investigating the properties of crumb rubber modified bitumen using classic and SHRP testing methods. Construction and Building Materials, 26(1), pp. 481-489. https://doi.org/10.1016/j.conbuildmat.2011.06.048.
Nikolaides, A., 2014. Highway engineering: Pavements, materials and control of quality. CRC Press.
Nunn, M., and Ferne, B. W., 2001. Design and assessment of long-life flexible pavements. Transportation Research Circular, 503(12), pp. 32-49.
Oliver, J. W., 1981. Modification of paving asphalts by digestion with scrap rubber. Transportation Research Record, (821).
Padmarekha, A., and Krishnan, J. M., 2011. Experimental investigation on sol–gel transition of asphalt. International Journal of Advances in Engineering Sciences and Applied Mathematics, 3, pp. 131-139. https://doi.org/10.1007/s12572-011-0048-5.
Paje, S. E., Luong, J., Vázquez, V. F., Bueno, M., and Miro, R., 2013. Road pavement rehabilitation using a binder with a high content of crumb rubber: Influence on noise reduction. Construction and Building Materials, 47, pp. 789-798. http://dx.doi.org/10.1016/j.conbuildmat.2013.05.008.
Peralta, E. J. F., 2009. Study of the interaction between bitumen and rubber (Doctoral dissertation, Universidade do Minho (Portugal)).
Peralta, J., Silva, H. M., Machado, A. V., Pais, J., Pereira, P. A., and Sousa, J. B., 2010. Changes in rubber due to its interaction with bitumen when producing asphalt rubber. Road Materials and Pavement Design, 11(4), pp. 1009-1031. https://doi.org/10.1080/14680629.2010.9690317.
Pereira, P. A., Pais, J. C., Trichês, G., and Fontes, L. P. T. L., 2008. Laboratory optimization of continuous blend asphalt rubber. Proceedings of 3rd European pavement and asset management EPAM, 3, pp. 1-12, https://doi.org/10.1680/jemmr.16.00037.
Presti, D. L., 2013. Recycled tyre rubber modified bitumens for road asphalt mixtures: A literature review. Construction and Building Materials, 49, pp. 863-881. https://doi.org/10.1016/j.conbuildmat.2013.09.007.
Salama, E. A., Amir, H., and Danil, N., 2020. Effect of Crumb Rubber Particles on the Properties of Asphalt. Lecture Notes in Civil Engineering, 59. https://doi.org/10.1007/978-981-15-1193-6_5.
Sarsam, S. I., 2019. Moisture damage of warm mix asphalt concrete. Journal of Engineering, 25(6), pp. 101-116. https://doi.org/10.31026/j.eng.2019.06.08.
Sarsam, S. I., and Hasan, E. A., 2017. Evaluating water damage resistance of recycled asphalt concrete mixtures. Journal of Engineering, 23(1), pp. 156-168.
Šernas, O., Vaitkus, A., Kilaitė, D., and Škulteckė, J., 2023. The effect of the crumb rubber type and amount on dry process modified asphalt mixture and on low-temperature cracking and high-temperature rutting. International Journal of Pavement Engineering, 24(1), P. 2259574, https://doi.org/10.1080/10298436.2023.2259574.
Shen, J., Amirkhanian, S., Xiao, F., and Tang, B., 2009. Influence of surface area and size of crumb rubber on high temperature properties of crumb rubber modified binders. Construction and Building Materials, 23(1), pp. 304-310. https://doi.org/10.1016/j.conbuildmat.2007.12.005.
Shu, X., and Huang, B., 2014. Recycling of waste tire rubber in asphalt and portland cement concrete: An overview. Construction and Building Materials, 67, pp. 217-224. http://dx.doi.org/10.1016/j.conbuildmat.2013.11.027
Sienkiewicz, M., Borzędowska-Labuda, K., Wojtkiewicz, A., and Janik, H., 2017. Development of methods improving storage stability of bitumen modified with ground tire rubber: A review. Fuel Processing Technology, 159, pp. 272-279. http://dx.doi.org/10.1016/j.fuproc.2017.01.049.
Sienkiewicz, M., Kucinska-Lipka, J., Janik, H., and Balas, A., 2012. Progress in used tyres management in the European Union: A review. Waste Management, 32(10), pp. 1742-1751. http://dx.doi.org/10.1016/j.wasman.2012.05.010.
Singh, D., Mishra, V., Girimath, S. B., Das, A. K., and Rajan, B., 2019. Evaluation of rheological and moisture damage properties of crumb rubber–modified asphalt binder. Advances in Civil Engineering Materials, (1), pp. 477-496. https://doi.org/10.1520/ACEM20190045.
Tahami, S. A., Mirhosseini, A. F., Dessouky, S., Mork, H., and Kavussi, A., 2019. The use of high content of fine crumb rubber in asphalt mixes using dry process. Construction and Building Materials, 222, pp. 643-653. https://doi.org/10.1016/j.treng.2022.100145.
Tan, E. H., Zahran, E. M., and Tan, S. J., 2022. The optimal use of crumb rubber in hot-mix asphalt by dry process: a laboratory investigation using Marshall mix design. Transportation Engineering, 10, P. 100145. https://doi.org/10.1016/j.treng.2022.100145.
Tefera, B. Y., Tadele, K., and Geremew, A.. 2018. Evaluation of the effect of rubber modified bitumen on asphalt performance. American Journal of Civil Engineering, 6(3), 87-92. https://doi.org/10.11648/j.ajce.20180603.11.
Thodesen, C., Shatanawi, K., and Amirkhanian, S., 2009. Effect of crumb rubber characteristics on crumb rubber modified (CRM) binder viscosity. Construction and Building Materials, 23(1), pp. 295-303, https://doi.org/10.3390/su151813568.
Uriarte-Miranda, M. L., Caballero-Morales, S. O., Martinez-Flores, J. L., Cano-Olivos, P., and Akulova, A. A., 2018. Reverse logistic strategy for the management of tire waste in Mexico and Russia: Review and conceptual model. Sustainability, 10(10), P. 3398. https://doi.org/10.3390/su10103398.
Wang, H., Apostolidis, P., Zhu, J., Liu, X., Skarpas, A., and Erkens, S., 2021. The role of thermodynamics and kinetics in rubber–bitumen systems: a theoretical overview. International Journal of Pavement Engineering, 22(14), pp. 1785-1800. https://doi.org/10.1080/10298436.2020.1724289.
Wang, H., Dang, Z., Li, L., and You, Z., 2013. Analysis on fatigue crack growth laws for crumb rubber modified (CRM) asphalt mixture. Construction and Building Materials, 47, pp. 1342-1349. http://dx.doi.org/10.1016/j.conbuildmat.2013.06.014.
Wang, H., Liu, X., Apostolidis, P., Erkens, S., and Scarpas, T., 2019. Numerical investigation of rubber swelling in bitumen. Construction and Building Materials, 214, pp. 506-515.
Wang, S., Cheng, D., and Xiao, F., 2017. Recent developments in the application of chemical approaches to rubberized asphalt. Construction and Building Materials, 131, pp. 101-113. http://dx.doi.org/10.1016/j.conbuildmat.2016.11.077.
Wang, T., Xiao, F., Zhu, X., Huang, B., Wang, J., and Amirkhanian, S., 2018. Energy consumption and environmental impact of rubberized asphalt pavement. Journal of Cleaner Production, 180, pp. 139-158. https://doi.org/10.1016/j.jclepro.2018.01.086.
Wang, W., Cheng, Y., Chen, H., Tan, G., Lv, Z., and Bai, Y., 2019. Study on the performances of waste crumb rubber modified asphalt mixture with eco-friendly diatomite and basalt fiber. Sustainability, 11(19), P. 5282, https://doi.org/10.3390/su11195282.
Wulandari, P. S., and Tjandra, D., 2017. Use of crumb rubber as an additive in asphalt concrete mixture. Procedia Engineering, 171, 1384-1389. https://doi.org/10.1016/j.proeng.2017.01.451.
Xiang, Y., Xie, Y., Long, G., and Zeng, L., 2019. Ultraviolet irradiation of crumb rubber on mechanical performance and mechanism of rubberised asphalt. Road Materials and Pavement Design, 20(7), pp. 1624-1637. https://doi.org/10.1080/14680629.2018.1468801.
Zhang, D., Li, H., Tu, H., and Weng, Y., 2022. Investigation on the quasi-static mechanical properties and dynamic compressive behaviors of ultra-high performance concrete with crumbed rubber powders. Materials and Structures, 55(3), 104, https://doi.org/10.1617/s11527-022-01904-0.
Zheng, W., Wang, H., Chen, Y., Ji, J., You, Z., and Zhang, Y., 2021. A review on compatibility between crumb rubber and asphalt binder. Construction and Building Materials, 297, P. 123820. https://doi.org/10.1016/j.conbuildmat.2021.123820.
Zuo, P., Qu, S., and Shen, W., 2019. Asphaltenes: Separations, structural analysis and applications. Journal of Energy Chemistry, 34, pp. 186-207. https://doi.org/10.1016/j.jechem.2018.10.004.