Bond Behavior between Externally Bonded CFRP Laminate and Reactive Powder Concrete using Epoxy Adhesive
Main Article Content
Abstract
Reactive powder concrete is an attractive new concrete technology for structural design applications. The technology has been used for different structures with several advantages. Strengthening and retrofitting structures using FRP has grown rapidly in the last decades to upgrade structures because of the gradual material degradation over time. The technique was applied mainly for conventional normal and high-strength concrete and steel. This study is conducted to study the performance of bonding interface among reactive powder concrete substrate and CFRP sheets using different parameters, including bond length, bond width, and bond–slip relations. Concrete prisms with dimensions of (25 x 25 x 75 mm) were adopted in the experimental program. Five groups of three specimens were tested using a single-lap shear test setup, and pull-out loading was applied for testing the specimens. Test results indicated significant bonding properties compared to the normal concrete.
Article Details
Section
How to Cite
References
ACI Committee 440-2R. 2017. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. American Concrete Institute
Al-Abdwais A. and Al-Mahaidi R., 2016. Bond behaviour between NSM CFRP laminate and concrete using modified cement-based adhesive. Construction and Building Materials, 127, pp. 284-292. https://doi.org/10.1016/j.conbuildmat.2016.09.142
Al-Ahmed, A., H., and Al-Jbouri, M.H., 2016. Behavior of reinforced concrete deep beams strengthened with carbon fiber reinforced polymer strips, Journal of Engineering, 22(8). pp. 37-53. https://doi.org/10.31026/j.eng.2016.08.03.
Al-Zuhairi, A.H. and Sahi, W.D., 2013. Numerical prediction of bond-slip behavior in simple pull-out concrete specimens. Journal of Engineering, 19(1), pp. 1-12. https://doi.org/10.31026/j.eng.2013.01.01
AS 1012.10., 2010. Methods of testing concrete-determination of indirect tensile strength of concrete cylinders (Brasil or splitting test). Standards Australia.
AS 1012.9, 1999. Methods of testing concrete-determination of the compressive strength of concrete specimens. Standards Australia, Melbourne, Australia.
ASTM D3039/D3039M, 2008. Standard test method for tensile properties of polymer matrix composite materials.
ASTM International, West Conshohocken, PA, United States.
ASTM D7205/D7205M-06, 2011. Standard test method for tensile properties of fiber reinforced polymer matrix composite bars. https://doi.org/10.1520/D7205_D7205M-06
Daraj, A.J. and Al‐Zuhairi, A.H., 2023. The effect of cohesive debonding elimination on enhancing the flexural performance of damaged unbonded prestressed concrete girders strengthened using NSM CFRP. Journal of Engineering, 29(09), pp.102-116. https://doi.org/10.31026/j.eng.2023.09.08
De Lorenzis, L. and Nanni, A., 2002. Bond between near-surface mounted fiber reinforced polymer rods and concrete in structural strengthening. Structural Journal, 99(2), pp.123-132.
De Lorenzis, L., Miller, B. and Nanni, A., 2001. Bond of FRP laminates to concrete. ACI materials journal, 98(3), pp.256-264. https://doi.org/ 10.14359/10281.
De Lorenzis, L., Rizzo, A., and La Tegola, A., 2002. A modified pullout test for bond of near-surface mounted FRP rods in concrete. Composites, Part B, 33(8), pp. 589–603. https://doi.org/10.1016/S1359-8368(02)00052-5.
El Meski, F., and Harajli, M., 2013a. Flexural behaviour of unbonded post-tensioned concrete members strengthened using external FRP composites. Journal of Composites for Construction, 17, pp. 197-207. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000330.
Ezeldin, A., and Balaguru, P., 1989. Bond behavior of normal and high strength fiber reinforced concrete. ACI Mater. J., 86, pp.515–524. https://doi.org/%2010.14359/2141
Ferracuti, B., Savoia, M. and Mazzotti, C., 2007, Interface law for FRP–concrete delamination, Ccomposite structures, 80, pp. 523-531. https://doi.org/10.1016/j.compstruct.2006.07.001
Focacci, F., Nanni, A., and Bakis, C. E., 2000. Local bond-slip relationship for FRP reinforcement in concrete. J. Compos. Constr., 4(1), pp. 24–31. https://doi.org/10.1061/(ASCE)1090-0268(2000)4:1(24).
Foster, R.M., Brindley, M., Lees, J.M., Ibell, T.J., Morley, C.T., Darby, A.P., and Evernden, M.C., 2017. Experimental investigation of reinforced concrete T-beams strengthened in shear with externally bonded CFRP sheets. Journal of Composites for Construction, 21, P. 04016086. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000743.
Golham, M.A. and Al-Ahmed, A.H.A., 2024. Strengthening of GFRP reinforced concrete slabs with openings. Journal of Engineering, 30(01), pp.157-172. https://doi.org/10.31026/j.eng.2024.01.10
Hassan, T. and Rizkalla, S., 2004. Bond mechanism of NSM FRP bars for flexural strengthening of concrete structures. ACI Structural Journal, 101(6), pp. 830-839.
Hoult, N.A. and Lees, J.M., 2009., Efficient CFRP strap configurations for the shear strengthening of reinforced concrete T-beams. Journal of Composites for Construction, 13(1), pp. 45-52. https://doi.org/10.1061/(ASCE)1090-0268(2009)13:1(4
Lee, D., Hui, J., and Cheng, L., 2012. Bond characteristics of NSM reinforcement in concrete due to adhesive type and surface configuration. In 6th International Conference on FRP composites in civil engineering (CICE2012). Rome, Italy.
Malvar, L.J., Cox, J.V. and Cochran, K.B., 2003. Bond between carbon fiber reinforced polymer bars and concrete. I: Experimental study. Journal of composites for construction, 7(2), pp.154-163. https://doi.org/10.1061/(ASCE)1090-0268(2003)7:2(154).
Matte, V. and Moranville, M., 1999. Durability of reactive powder composites: influence of silica fume on the leaching properties of very low water/binder pastes. Cement and concrete composites, 21(1), pp.1-9. https://doi.org/ 10.1016/S0958-9465(98)00025-0.
Mukhopadhyaya, P. and Swamy, N., 2001. Interface shear stress: a new design criterion for plate debonding. Journal of Composites for Construction, 5(1), pp.35-43. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:1(35)
Nguyen, D. M., Chan, T. K., and Cheong, H. K., 2001. Brittle failure and bond development length of CFRP-concrete beams. Journal of Composites for Construction, 5(1), pp. 12–17. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:1(12)
Nguyen-Minh, L., Phan-Vu, P., Tran-Thanh, D., Truong, Q.P.T., Pham, T.M., Ngo-Huu, C., and Rovňák, M., 2018. Flexural-strengthening efficiency of CFRP sheets for unbonded post-tensioned concrete T-beams. Engineering Structures, 166, pp. 1-15. https://doi.org/10.1016/j.engstruct.2018.03.065
Novidis, D.G. and Pantazopoulou, S.J., 2008. Bond tests of short NSM-FRP and steel bar anchorages. Journal of Composites for Construction, 12(3), pp. 323-333. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:3(323)
Parameshwar, H., and Subhash, C.Y., 2017. Investigation on Mechanical Properties of Reactive Powder Concrete under Different Curing Regimes, Materials Today Journal, 4(9), pp. 9758-9762. https://doi.org/%2010.1016/j.matpr.2017.06.262
Pilakoutas, K., Guadagnini, M., Neocleous, K. and Matthys, S., 2011. Design guidelines for FRP reinforced concrete structures. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 164(4), pp.255-263. https://doi.org/10.1680/stbu.2011.164.4.255.
Razaqpur, G., and Mostafa, A.B., 2015. C-Anchor for strengthening the connection between adhesively bonded laminates and concrete substrates. Technologies, 3(4), pp. 238-258. https://doi.org/10.3390/technologies3040238.
Richard, P., and Cheyrezy, M.H., 1994. Reactive powder concretes with high ductility and 200-800 MPa compressive strength. Special Publication, 144, pp.507-518.
Said, A.I., Al-Ahmed, A.H.A. and Al-Fendawy, D.M., 2015. Strengthening of reinforced concrete T-section beams using external post-tensioning technique. Journal of Engineering, 21(12), pp.139-154. https://doi.org/10.31026/j.eng.2015.12.09
Salman, W.D., Mansor, A.A., and Mahmood, M., 2018. Behavior of reinforced concrete one-way slabs strengthened by CFRP sheets in flexural zone. Int. J. Civ. Eng. Technol, 9(10), pp.1872–1881. https://doi.org/0976-6308/1872-18871
Sena-Cruz, J. and J. Barros, 2004. Bond between near-surface mounted carbon-fiber-reinforced polymer laminate strips and concrete. Journal of Composites for Construction, 8(6), pp. 519-527. https://doi.org/10.1061/(ASCE)1090-0268(2004)8:6(519)
Sena-Cruz, J. M. S., and Barros, J. A. O. 2002a. Bond behavior of carbon laminate strips into concrete by pullout-bending tests. Proc., Int. Symp. on Bond in Concrete—From the Research to Standards,
Tighiouart, B., Benmokrane, B. and Gao, D., 1998. Investigation of bond in concrete member with fibre reinforced polymer (FRP) bars. Construction and building materials, 12(8), pp. 453-462. https://doi.org/10.1016/S0950-0618(98)00027-0
Triantafillou, T.C. and Plevris, N., 1992. Strengthening of RC beams with epoxy-bonded fibre-composite materials. Materials and structures, 25, pp. 201-211. https://doi.org/10.1007/BF02473064
Zheng, Y., Li, C., and Yu, G., 2012. Investigation of structural behaviours of laterally restrained GFRP reinforced concrete slabs. Composites Part B: Engineering, 43(3), pp. 1586–1597. https://doi.org/10.1016/j.compositesb.2011