Numerical Study of CFRP-Strengthened Square RC Columns under Axial Compression with Initial Geometric Imperfections
Main Article Content
Abstract
Reinforced concrete (RC) columns are the enablers of modern cities; their numerical modeling requires precise treatment of initial geometric imperfections and confinement effects to represent their structural behavior realistically. This study describes a finite element analysis (FEA) framework developed in Abaqus/CAE to investigate the axial behavior of full-scale short and slender square RC columns with and without interior transverse reinforcement (ties). The models include external confinement with carbon fiber–reinforced polymer (CFRP) jacketing, and different global and local imperfection cases were considered to assess their effects on strength and ductility. Calibration against code provisions was achieved by comparing the numerical results with an interaction diagram derived in accordance with ACI 318-25 and ACI PRC-440.2-23 design requirements. The study showed that as the imperfection amplitude increases, the strength and ductility of short, slender RC columns decrease, irrespective of confinement. For short columns subjected to axial compression, one can achieve good correlation with code-based nominal axial load predictions without considering explicit imperfections, provided no strength reduction factor is included, and accidental eccentricities are ignored. In contrast, for slender columns, imperfections are key in inducing slenderness effects, particularly in global imperfection cases with pinned-end boundary conditions.
Downloads
Article Details
Section
How to Cite
References
Abdulsattar, A.W. and Al-Baghdadi, H.A., 2020. Experimental and numerical study of CFRP-confined square concrete columns under axial compression. Journal of Engineering, 26(4), pp. 141–160. https://doi.org/10.31026/j.eng.2020.04.10.
Abokwiek, R., Abdalla, J.A., Hawileh, R.A., and El Maaddawy, T., 2021. RC columns strengthened with NSM-CFRP strips, and CFRP wraps under axial and uniaxial bending: Experimental investigation and capacity models. Journal of Composites for Construction, 25(2). https://doi.org/10.1061/(asce)cc.1943-5614.0001117.
ACI PRC 318, 2025. Building code for structural concrete—Code requirements and commentary (ACI CODE-318-25). 318-19 Building Code Requirements for Structural Concrete and Commentary. Farmington Hills, MI: American Concrete Institute.
ACI PRC 440.2, 2023. Design and construction of externally bonded fiber-reinforced polymer (FRP) systems for strengthening concrete structures—Guide (ACI PRC-440.2-23). Farmington Hills, MI: American Concrete Institute.
Al-Ahmed, A.H.A. and Al-Jburi, M.H.M., 2016. Behavior of reinforced concrete deep beams strengthened with carbon fiber reinforced polymer strips. Journal of Engineering, 22(8), pp. 37–53. https://doi.org/10.31026/j.eng.2016.08.03.
Alekseytsev, A.V. and Kurchenko, N.S., 2023. Safety of reinforced concrete columns: Effect of initial imperfections and material deterioration under emergency actions. Buildings, 13(4), P. 1054. https://doi.org/10.3390/buildings13041054.
Ali, F.A., Hasan, Q.A. and Mohammed, D.H., 2023. Strengthening of recycled aggregate concrete slender column with CFRP. In: E3S Web of Conferences. EDP Sciences. P. 02015. https://doi.org/10.1051/e3sconf/202342702015.
Al-Nimry, H.S. and Al-Rabadi, R.A., 2019. Axial–flexural interaction in FRP-wrapped RC columns. International Journal of Concrete Structures and Materials, 13(1). https://doi.org/10.1186/s40069-019-0366-8.
American Institute of Steel Construction, 2022. Specification for structural steel buildings (ANSI/AISC 360-22). 2022nd ed. Chicago, IL.
Ayazian, R., Abdolhosseini, M., Firouzi, A. and Li, C.Q., 2021. Reliability-based optimization of external wrapping of CFRP on reinforced concrete columns considering decayed diffusion. Engineering Failure Analysis, 128, P. 105592. https://doi.org/10.1016/j.engfailanal.2021.105592.
Van Cao, V. and Pham, S.Q., 2019. Comparison of CFRP and GFRP wraps on reducing seismic damage of deficient reinforced concrete structures. International Journal of Civil Engineering, 17(11), pp. 1667–1681. https://doi.org/10.1007/s40999-019-00429-y.
Castro Quispe, V.J., de Diego Villalón, A., León González, F.J., Martínez de Mingo, S., and Echevarría Giménez, L., 2024. Evaluating the effectiveness of CFRP confinement: New model and simplified estimation of ductility improvement. Structures, 70, P. 107825. https://doi.org/10.1016/j.istruc.2024.107825.
Darwin, David. and Dolan, C.W., 2021. Design of concrete structures. 16th ed. McGraw-Hill Education.
Dassault Systèmes, 2025. Abaqus 2025 FDO2 Abaqus/CAE user’s guide. https://www.3ds.com.
Fosroc, 2019. Nitowrap CW: High performance, high strength carbon fibre system for structural reinforcement of concrete. https://www.fosroc.com.
Hafezolghorani, M., Hejazi, F., Vaghei, R., Jaafar, M.S. Bin and Karimzade, K., 2017. Simplified damage plasticity model for concrete. In: Structural Engineering International. Int. Assoc. for Bridge and Structural Eng. Eth-Honggerberg. pp. 68–78. https://doi.org/10.2749/101686616X1081.
Harvey, P. S. and Cain, T.M.N., 2020. Buckling of elastic columns with initial imperfections and load eccentricity. Structures, 23, pp. 660–664. https://doi.org/10.1016/j.istruc.2019.09.021.
Hassoun, M.N. and Al-Manaseer, A., 2020. Structural concrete: Theory and design. 7th ed. Hoboken, NJ: John Wiley & Sons, Inc.
Ibrahim, T.H., 2017. Buckling loads and effective length factor for non-prismatic columns. Journal of Engineering, 23(10), pp. 431–444. https://doi.org/10.31026/j.eng.2017.10.10.
Kadhim, J.A., Al.Zaidee, S.R. and Al-Baghdadi, H.A., 2025. Seismic performance of reinforced concrete non-prismatic columns. Journal of Engineering, 31(7), pp. 53–69. https://doi.org/10.31026/j.eng.2025.07.03.
Korentz, J., 2020. Influence of geometric imperfections on buckling resistance of reinforcing bars during inelastic deformation. Materials, 13(16). https://doi.org/10.3390/MA13163473.
Lee, J. and Fenves, G.L., 1998. Plastic-damage model for cyclic loading of concrete structures. Journal of Engineering Mechanics, 124(8), pp. 892–900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892).
Lubliner, J., Oliver, J., Oller, S. and Oñate, E., 1989. A plastic-damage model for concrete. International Journal of Solids and Structures, 25(3), pp. 299–326. https://doi.org/10.1016/0020-7683(89)90050-4.
Mahboubi, S. and Shiravand, M.R., 2019. Failure assessment of skew RC bridges with FRP piers based on damage indices. Engineering Failure Analysis, 99, pp. 153–168. https://doi.org/10.1016/j.engfailanal.2019.02.010.
Mai, A.D., Sheikh, M.N. and Hadi, M.N.S., 2018. Investigation on the behaviour of partial wrapping in comparison with full wrapping of square RC columns under different loading conditions. Construction and Building Materials, 168, pp. 153–168. https://doi.org/10.1016/j.conbuildmat.2018.02.003.
Mercimek, Ö., Ghoroubi, R., Anil, Ö., Çakmak, C., Özdemir, A. and Kopraman, Y., 2020. Strength, ductility, and energy dissipation capacity of RC column strengthened with CFRP strip under axial load. Mechanics Based Design of Structures and Machines, 51(2), pp. 961–979. https://doi.org/10.1080/15397734.2020.1860772.
Naqe, A.W. and Al-zuhairi, A.H., 2020. Strengthening of RC beam with large square opening using CFRP. Journal of Engineering, 26(10), pp. 123–134. https://doi.org/10.31026/j.eng.2020.10.09.
Narule, G.N. and Bambole, A.N., 2021. An experimental study on axial behavior of CFRP-strengthened RC rectangular columns with variable slenderness ratio. Asian Journal of Civil Engineering, 22(2), pp. 263–275. https://doi.org/10.1007/s42107-020-00312-5.
Sadeghian, P. and Fillmore, B., 2018. Strain distribution of basalt FRP-wrapped concrete cylinders. Case Studies in Construction Materials, 9. https://doi.org/10.1016/j.cscm.2018.e00171.
Saleh, E., Tarawneh, A., Almasabha, G. and Momani, Y., 2022. Slenderness limit of FRP-confined rectangular concrete columns. Structures, 38, pp. 435–447. https://doi.org/10.1016/j.istruc.2022.02.030.
Samy, K., Fouda, M.A., Fawzy, A. and Elsayed, T., 2022. Enhancing the effectiveness of strengthening RC columns with CFRP sheets. Case Studies in Construction Materials, 17. https://doi.org/10.1016/j.cscm.2022.e01588.
Shaikh, F.U.A. and Alishahi, R., 2019. Behaviour of CFRP wrapped RC square columns under eccentric compressive loading. Structures, 20, pp. 309–323. https://doi.org/10.1016/j.istruc.2019.04.012.
Sudhir Sastry, Y.B., Budarapu, P. R., Krishna, Y. and Devaraj, S., 2014. Studies on ballistic impact of the composite panels. Theoretical and Applied Fracture Mechanics, 72(1), pp. 2–12. https://doi.org/10.1016/j.tafmec.2014.07.010.
Tafsirojjaman, T., Ur Rahman Dogar, A., Liu, Y., Manalo, A. and Thambiratnam, D.P., 2022. Performance and design of steel structures reinforced with FRP composites: A state-of-the-art review. Engineering Failure Analysis, 138, P. 106371. https://doi.org/10.1016/j.engfailanal.2022.106371.
Walport, F., Gardner, L. and Nethercot, D.A., 2020. Equivalent bow imperfections for use in design by second order inelastic analysis. Structures, 26, pp. 670–685. https://doi.org/10.1016/j.istruc.2020.03.065.
Yan, Z.W., Bai, Y.L., Ozbakkaloglu, T., Gao, W.Y. and Zeng, J.J., 2021. Axial impact behavior of Large-Rupture-Strain (LRS) fiber reinforced polymer (FRP)-confined concrete cylinders. Composite Structures, 276. https://doi.org/10.1016/j.compstruct.2021.114563.