EFFECTIVE STRESS FINITE ELEMENT ANALYSIS OF PILE-SOIL INTERACTION PROBLEMS
محتوى المقالة الرئيسي
الملخص
The effective stress method is developed to predict the axial capacity of piles in clay. This
method is based on the principle that, at failure, the available shear resistance at the pile soil
interface is related to the mean normal effective stress at the pile face and the effective stress
friction angle for the soil sliding on the pile material.
In this paper, the coupled non-linear finite element method is used to analyze some pile-soil
interaction problems. This computer program ( CRISP ) is used for this task. Eight- node
isoparametric elements were used for displacements while four- node elements are used for
pore pressure. Interface elements are used to simulate the interaction between the pile and the
soil. The soil is assumed to follow different models, linear elastic and modified Cam-clay
model. A comparison is made between the measured and predicted settlements and excess
pore water pressures and good convergence was obtained in which the proposed technique
used in this paper, in which the measured excess pore water pressures are considered as initial
pore pressures in the computer program ( CRISP ). No load was applied on the pile. The
dissipation of excess pore water was studied through carrying out consolidation analysis.
تفاصيل المقالة
القسم
كيفية الاقتباس
المراجع
• Al-Assady A. K. M., (1998); “Effect of anisotropy on two-dimensional consolidation
of clayey soil”, a Thesis submitted to Civil Eng. Dept. in the University of Baghdad for
degree of Master.
• Al-Chalabi J. H.H., (1990); “Single pile analysis using finite element method”, a
Thesis submitted to Civil Eng. Dept. in the University of Basra for the degree of
Master.
• Britto A. M. and Gunn M. J., (1987); “Critical state soil mechanics via finite
elements”, John Wiley and Sons, New York, U.S.A.
• Castelli F. and Maugeri M., (2002); “Simplified nonlinear analysis for settlement
prediction of pile groups”, Journal of Geotechnical and Geoenvironmental
Engineering, January, ASCE, vol.128, No.1, P.P. 76-83.
• Desai C. S., (1974); “Numerical design-analysis for piles in sands”, Journal of the
Geotechnical Engineering Division, vol.100, No.6, P.P. 613-635.
• Grande L. and Nordal S., (1979); “Pile-soil interaction analysis on effective stress
basis”, Recent Developments in the Design and Construction of Piles, ICE, London.
• Hunt C. E., Pestana J. M., Bray J. D. and Riemer M., (2002); “ Effect of pile driving on
static and dynamic properties of soft clay”, Journal of Geotechnical and
Geoenvironmetal Engineering, January, ASCE, vol.128, No.1, P.P. 13-23.
• Kirby R.C. and Esrig M.I., (1979); “Further development of a general effective stress
method for prediction of axial capacity for driven piles in clay”, Recent Developments
in the Design and Construction of Piles, ICE, London.
• Pestana J. M., Hunt C. E. and Bray J. D., (2002); “Soil deformation and excess pore
pressure field around a closed-ended pile”, Journal of Geotechnical and
Geoenvironmental Engineering, January, ASCE, vol.128, No.1, P.P. 1-12.
• Randolph M. F. and Wroth C. P., (1978); “Analysis of deformation of vertically loaded
piles”, Geotechnique, Vol. 104, No.12, P.P. 1465-1488.
• Randolph M. F. and Wroth C. P., (1981); “Application of the failure state in undrained
simple shear to the shaft capacity of driven piles”, Geotechnique 31, No.1, P.P. 143-